Category Archives: Network Hacks

IP Over QR Codes

Posted on by

We’ve seen networks built over some interesting mediums, but QR codes has to be a new one. [Eric Seifert] decided to try to use QR codes to make an IP connection. He used these visual codes to create a bi-directional connection between two camera-equipped computers. He’s a persistent chap, because it works: in one of his videos, he shows an SSH connection between two devices.

He faced a number of challenges on the way. Although there is plenty of code to read QR codes, the data that can be encoded and read from them is limited. There is a binary …read more

Continue reading IP Over QR Codes→

A Rebel Alliance for Internet of Things Standards

Posted on by

Back when the original Internet, the digital one, was being brought together there was a vicious standards war. The fallout from the war fundamentally underpins how we use the Internet today, and what’s surprising is that things didn’t work out how everyone expected. The rebel alliance won, and when it comes to standards, it turns out that’s a lot more common than you might think.

Looking back the history of the Internet could have been very different. In the mid eighties the OSI standards were the obvious choice. In 1988 the Department of Commerce issued a mandate that all computers …read more

Continue reading A Rebel Alliance for Internet of Things Standards→

ESP Clock Needs More Power

Posted on by

[Victor-Chew] is tired of setting clocks. After all, here we are in the 21st century, why do we have to adjust clocks (something we just did for daylight savings time)? That’s why [Victor] came up with ESPClock.

Based on a $2 Ikea analog clock, [Victor] had a few design goals for the project:

  • Automatically set the time from the network
  • Automatically adjust for daylight savings time
  • Not cost much more than a regular clock
  • Run for a year on batteries

The last goal is the only one that remains unmet. Even with a large battery pack, [Victor’s] clock runs out …read more

Continue reading ESP Clock Needs More Power→

Colorful Display Keeps Track of Your Network

Posted on by

So you’ve built out your complete home automation setup, with little network-connected “things” scattered all around your home. You’ve got net-connected TVs, weather stations, security cameras, and whatever else. More devices means more chances for failure. How do you know that they’re all online and doing what they should?

[WTH]’s solution is pretty simple: take a Raspberry Pi Zero, ping all the things, log, and display the status on an RGB LED strip. (And if that one-sentence summary was too many words for you, there’s a video embedded below the break.)

Before you go screaming “NOTAHACK!”, we should let you …read more

Continue reading Colorful Display Keeps Track of Your Network→

How to Run a Pagekite Server to Expose Your Raspberry Pi

Posted on by

Last time I showed you how to expose a web service on a Raspberry Pi (or, actually, any kind of device) by using a reverse proxy from Pagekite. On your Pi, you just need a simple Python script. However, it also depends on the Pagekite server, which isn’t always convenient. There are limits to the free service, and you don’t control the entire thing. The good news is twofold: the same Python script you use to set up the client-side can also set up a server. The other good news is the entire thing is open source.

In practical terms, …read more

Continue reading How to Run a Pagekite Server to Expose Your Raspberry Pi→

Hackaday Prize Entry: Cheap Visible Light Communication

Posted on by

[Jovan] is very excited about the possibilities presented by Visible Light Communication, or VLC. It’s exciting and new. His opening paragraphs is filled with so many networking acronyms that VLC could be used for, our browser search history now looks like we’re trying to learn english without any vowels.

In lots of ways he has good reason to be excited. We all know that IR can communicate quite a bit, but when you’re clever about frequency and color and throw in some polarizers with a mix of clever algorithms for good measure you can get some very high bandwidth communication …read more

Continue reading Hackaday Prize Entry: Cheap Visible Light Communication→

MIT Thinks It Can One-Up TOR With New Anonymity Network: Riffle

Posted on by

Tor is the household name in anonymous networks but the system has vulnerabilities, especially when it comes to an attacker finding out who is sending and receiving messages. MIT researchers think they have found a better way in a system called Riffle. You can dig into the whitepaper but the MIT news article does a great job of providing an overview.

The strength at the core of Tor is the Onion Routing that makes up the last two letters the network’s name. Riffle keeps that aspect, building upon it in a novel way. The onion analogy has to do with …read more

Continue reading MIT Thinks It Can One-Up TOR With New Anonymity Network: Riffle→

The Terrible Devices Of The Internet Of Wrongs

Posted on by

Last week was Bsides London, and [Steve Lord] was able to give a talk about the devices that could pass for either a terrible, poorly planned, ill-conceived Internet of Things Kickstarter, or something straight out of the NSA toolkit. [Steve] built the Internet of Wrongs, devices that shouldn’t exist, but thanks to all this electronic stuff, does.

The WOL Box

Originally a project to assess the Arduino as a possible IoT platform, [Steve] created a horrible practical joke called the Wake On Lan box. [Steve]’s flatmate was convinced Apple makes superior hardware because his fully charged Macbook would last all …read more

Continue reading The Terrible Devices Of The Internet Of Wrongs→

OpenThread, A Solution To The WiFi Of Things

Posted on by

The term ‘Internet of Things’ was coined in 1999, long before every laptop had WiFi and every Starbucks provided Internet for the latte-sucking masses. Over time, the Internet of Things meant all these devices would connect over WiFi. Why, no one has any idea. WiFi is terrible for a network of Things – it requires too much power, the range isn’t great, it’s beyond overkill, and there’s already too many machines and routers on WiFi networks, anyway.

There have been a number of solutions to this problem of a WiFi of Things over the years, but none have caught on. …read more

Continue reading OpenThread, A Solution To The WiFi Of Things→