Author Archives: Brian McEvoy

Changing Color Under Pressure

Posted on by

When you saw the picture for this article, did you think of a peacock’s feather? These fibers are not harvested from birds, and in fact, the colors come from transparent rubber. As with peacock feathers, they come from the way light reflects off layers of differing materials, this is known as optical interference, and it is the same effect seen on oil slicks. The benefit to using transparent rubber is that the final product is flexible and when drawn, the interference shifts. In short, they change color when stretched.

Most of the sensors we see and feature are electromechanical, which …read more

Continue reading Changing Color Under Pressure→

Internal Power Pills

Posted on by

Arguably the biggest hurdle to implanted electronics is in the battery. A modern mobile phone can run for a day or two without a charge, but that only needs to fit into a pocket and were its battery to enter a dangerous state it can be quickly removed from the pocket. Implantable electronics are not so easy to toss on the floor. If the danger of explosion or poison isn’t enough, batteries for implantables and ingestibles are just too big.

Researchers at MIT are working on a new technology which could move the power source outside of the body and …read more

Continue reading Internal Power Pills→

Coming Back to Curving Bullets

Posted on by

What do you do when you have time, thousands of dollars worth of magnets, and you love Mythbusters? Science. At least, science with a flair for the dramatics. The myth that a magnetic wristwatch with today’s technology can stop, or even redirect, a bullet is firmly busted. The crew at [K&J Magnetics] wanted to take their own stab at the myth and they took liberties.

Despite the results of the show, a single magnet was able to measurably alter the path of a projectile. This won’t evolve into any life-saving technology because the gun is replaced with an underpowered BB …read more

Continue reading Coming Back to Curving Bullets→

Algae On Your Plate

Posted on by

For those of us who grow up around natural swimming holes, algae are the reason we have to wash after taking a dip. Swimmer’s itch or just being covered in green goop is not an attractive way to spend an afternoon. Lumping all algae together is not fair, some of it is nasty but some of it is delicious and humans have been eating it for generations.

If you are thinking that cases of algae cuisine are not widespread and that algae does not sound appealing, you are not alone. It is a tough sell, like convincing someone to try …read more

Continue reading Algae On Your Plate→

Social Engineering by Railways

Posted on by

Where do you travel every day? Are there any subtle ploys to manipulate your behavior? Would you recognize them or are they just part of the location? Social engineering sometimes gets a bad rap (or is it rep?) in the mainstream, but the public-facing edge of that sword can keep order as it does in Japanese train stations. They employ a whirlwind of psychological methods to make the stations run like clockwork.

The scope of strategies ranges from the diabolical placement of speakers emitting high-frequency tones to discourage youthful loitering to the considerate installation of blue lights to deter suicides. …read more

Continue reading Social Engineering by Railways→

Distorted Text Says A Lot

Posted on by

Getting bounced to a website by scanning a QR code is no longer an exciting feat of technology, but what if you scanned the ingredient list on your granola bar and it went to the company’s page for that specific flavor, sans the matrix code?

Bright minds at the Columbia University in the City of New York have “perturbed” ordinary font characters so the average human eye won’t pick up the changes. Even ordinary OCR won’t miss a beat when it looks at a passage with a hidden message. After all, these “perturbed” glyphs are like a perfectly legible character …read more

Continue reading Distorted Text Says A Lot→

Plant Biology is a Gateway

Posted on by

Too many college students have been subject to teachers’ aids who think they are too clever to be stuck teaching mere underclassmen. For that reason, [The Thought Emporium] is important because he approaches learning with gusto and is always ready to learn something new himself and teach anyone who wants to learn. When he released a video about staining and observing plant samples, he avoided the biggest pitfalls often seen in college or high school labs. Instead of calling out the steps by rote, he walks us through them with useful camera angles and close-ups. Rather than just pointing at …read more

Continue reading Plant Biology is a Gateway→

Smiling Robot Moves Without Wires

Posted on by

What could be cuter than a little robot that scuttles around its playpen and smiles all day? For the 2018 Hackaday prize [bobricius] is sharing his 2D Actuator for Micro Magnetic Robot. The name is not so cute, but it boasts a bill of materials under ten USD, so it should be perfect for educational use, which is why it is being created.

The double-layer circuit board hides six poles. Three poles run vertically, and three of them run horizontally. Each pole is analogous to a winding in a stepper motor. As the poles turn on, the magnetic shuttle moves …read more

Continue reading Smiling Robot Moves Without Wires→

Slipcasting Resin Prototypes

Posted on by

[Eric Strebel] doesn’t need an introduction anymore. If there is a picture of an elegantly designed part with a professional finish on our pages, there is a good chance he has a hand in it. This time he is sharing his method of making a part which looks like it is blow-molded but it is not. Blow-molded parts have a distinctive look, especially made with a transparent material and [Eric’s] method certainly passes for it. This could upgrade your prototyping game if you need a few custom parts that look like solidified soap bubbles.

Mold making is not covered in …read more

Continue reading Slipcasting Resin Prototypes→

Scrapped Motors Don’t Care About Direction

Posted on by

Spinners built into games of chance like roulette or tabletop board games stop on a random number after being given a good spin. There is no trick, but they eventually rest because of friction, no matter how hard your siblings wind up for a game-winning turn. What if the spinning continued forever and there was no programming because there was no controller? [Ludic Science] shows us his method of making a perpetual spinner with nothing fancier than a scrapped hard disk drive motor and a transformer. His video can also be seen below the break.

Fair warning: this involves mains …read more

Continue reading Scrapped Motors Don’t Care About Direction→