Tag Archives: Radio

Short Length of Wire Turns STM32 Microcontroller into Good-enough Wireless UART Blaster

Posted on by

Hackaday regular [befinitiv] wrote into the tip line to let us know about a hack you might enjoy, wireless UART output from a bare STM32 microcontroller. Desiring the full printf debugging experience, but constrained both by available space and expense, [befinitiv] was inspired to improvise by a similar hack that used the STM32 to send Morse code over standard FM frequencies.

In this case, [befinitiv]’s solution is both more useful and slightly more legal, as the software uses the 27 MHz ISM band to blast out ASK modulated serial data through a simple wire antenna attached to one of the …read more

Continue reading Short Length of Wire Turns STM32 Microcontroller into Good-enough Wireless UART Blaster→

DIY Tuning Capacitors from Washers and 3D-Printed Parts

Posted on by

The inside of classic radios holds wonders that the sterile chips and SMD components of today’s circuits can’t hold a candle to. Chunky resistors and capacitors, vacuum tubes with cathodes aglow, and seemingly free-form loops of wire forming inductors will all likely make an appearance. But the most fascinating bit of any old radio was connected to the tuning knob: the big variable capacitor with its interdigitating metal plates. Watching one at work, with its plates evenly and finely spaced, is still a joy to behold.

In an attempt to recapture a little of that magic, [Jeremy S. Cook] came …read more

Continue reading DIY Tuning Capacitors from Washers and 3D-Printed Parts→

Tiny Telescope For Simple Radio Astronomy

Posted on by

We are used to imagining radio telescopes as immense pieces of scientific apparatus, such as the Arecibo Observatory in Puerto Rico, or the Lovell telescope in the UK. It’s a surprise then that they can be constructed on a far more modest sale using off-the-shelf components, and it’s a path that [Gonçalo Nespral] has taken with his tiny radio telescope using a satellite dish. It’s on an azimuth-elevation mount using an Ikea lazy susan and a lead screw, and it has a satellite TV LNB at the hot end with a satellite finder as its detector.

So far he’s managed …read more

Continue reading Tiny Telescope For Simple Radio Astronomy→

Studying Airplane Radio Reflections With SDR

Posted on by

A property of radio waves is that they tend to reflect off things. Metal surfaces in particular act as good reflectors, and by studying how these reflections work, it’s possible to achieve all manner of interesting feats. [destevez] decided to have some fun with reflections from local air traffic, and was kind enough to share the results.

The project centers around receiving 2.3 GHz signals from a local ham beacon that have been reflected by planes taking off from the Madrid-Barajas airport. The beacon was installed by a local ham, and transmits a CW idenfication and tone at 2 W …read more

Continue reading Studying Airplane Radio Reflections With SDR→

Help For High-Frequency Hobbyists

Posted on by

Dead-bug circuit building is not a pretty affair, but hey, function over form. We usually make them because we don’t have a copper circuit board available or the duty of making one at home is not worth the efforts and chemical stains.

[Robert Melville and Alaina G. Levine] bring to light a compromise for high-frequency prototypes which uses the typical FR4 blank circuit board, but no etching chemicals. The problem with high-frequency radio is that building a circuit on a breadboard will not work because there is too much added inductance and capacitance from the wiring that will wreak havoc …read more

Continue reading Help For High-Frequency Hobbyists→

Help For High-Frequency Hobbyists

Posted on by

Dead-bug circuit building is not a pretty affair, but hey, function over form. We usually make them because we don’t have a copper circuit board available or the duty of making one at home is not worth the efforts and chemical stains.

[Robert Melville and Alaina G. Levine] bring to light a compromise for high-frequency prototypes which uses the typical FR4 blank circuit board, but no etching chemicals. The problem with high-frequency radio is that building a circuit on a breadboard will not work because there is too much added inductance and capacitance from the wiring that will wreak havoc …read more

Continue reading Help For High-Frequency Hobbyists→

Buy A Baofeng While You Still Can? FCC Scowls at Unauthorized Frequency Transmitters

Posted on by

There was a time when a handheld radio transceiver was an object of wonder, and a significant item for any radio amateur to own. A few hundred dollars secured you an FM walkie-talkie through which you could chat on your local repeater, and mobile radio was a big draw for new hams. Thirty years later FM mobile operation may be a bit less popular, but thanks to Chinese manufacturing the barrier to entry is lower than it has ever been. With extremely basic handheld radios starting at around ten dollars and a capable dual-bander being yours for somewhere over twice …read more

Continue reading Buy A Baofeng While You Still Can? FCC Scowls at Unauthorized Frequency Transmitters→

Submarine to Plane: Can You Hear Me Now? The Hydrophone Radar Connection

Posted on by

How does a submarine talk to an airplane? It sounds like a bad joke but it’s actually a difficult engineering challenge.

Traditionally the submarine must surface or get shallow enough to deploy a communication buoy. That communication buoy uses the same type of radio technology as planes. But submarines often rely on acoustic transmissions via hydrophones which is fancy-talk for putting speakers and microphones in the water as transmitters and receivers. This is because water is no friend to radio signals, especially high frequencies. MIT is developing a system which bridges this watery gap and it relies on acoustic transmissions …read more

Continue reading Submarine to Plane: Can You Hear Me Now? The Hydrophone Radar Connection→

Touch Anything And Everything

Posted on by

Powering IoT devices is often a question of batteries or mains power, but in rare exceptions to this rule there is no power supply (PDF Warning). At the University of Wisconsin-Madison and the University of California, San Diego, researchers have gone the extra mile to make advanced backscatter devices, and these new tags don’t need the discrete components we have seen in previous versions. They are calling it LiveTag, and it doesn’t need anything aside from a layer of foil printed or etched on a flexible ceramic-PTEF laminate. PTEF is mostly seen in the RF sector as a substrate for …read more

Continue reading Touch Anything And Everything→

Tesla Opens with Precomputed Key Fob Attack

Posted on by

This clever precomputation attack was developed by a group of researchers at KU Leuven in Belgium. Unlike previous key fob attacks that we’ve covered in the past which have been essentially relay attacks, this hack precomputes a ton of data, looks for a collision in the dataset, and opens the door. Here’s how it works.

Tesla opted not to design their own key fob system, but licensed a product based on Texas Instruments’ DST40 Cipher. A vehicle using this system broadcasts a radio message containing the car’s unique identifier. If the key fob is in range, it will respond to …read more

Continue reading Tesla Opens with Precomputed Key Fob Attack→