Category Archives: weather station

The Umbrella That Tells You The Weather

Posted on by

Most people can tell you the various uses of the umbrella — it keeps the rain off, pokes sleeping train passengers awake, and can be used as an improvised defensive weapon when tension in the hot dog line reaches boiling point. A true Englishman would never deign to employ their brolly so imprudently, of course, but they might just give it an upgrade by packing in a full weather station.

The build uses the Particle Photon as the brains of the operation, interfacing it with several sensors. There’s a DHT11 to handle temperature and humidity measurement, an Adafruit barometric pressure …read more

Continue reading The Umbrella That Tells You The Weather→

Weather Forecasting Clock Makes An Almighty Racket

Posted on by

The old-fashioned alarm clock was a staple of cartoons in years past, with loud clanging bells and slap-to-shutoff functionality. Despite being an excellent dramatic device, these classic timepieces began to lose favor to the digital clock radio, and, in more recent times, the smartphone alarm. However, [LenkaDesign] has come up with this excellent build that combines the best of the old and the new.

The build starts with an old alarm clock. The clockwork internals are removed, but the bells remain, powered instead by a brushed DC motor. An Arduino Nano is the brains of the operation, interfacing with the …read more

Continue reading Weather Forecasting Clock Makes An Almighty Racket→

A True 3D Printed Weather Station

Posted on by

If the term “3D printed weather station” makes you think of a printed enclosure for off-the-shelf sensors, don’t feel bad. We thought the same thing when we first read the message [Rob Ward] sent in about his latest project. Surely he couldn’t mean that he actually printed all the principal parts of a serious weather station setup, such as the wind vane, anemometer, or rain gauge?

Except, on closer inspection, that’s exactly what he did. Every part of the weather station is designed in OpenSCAD, printed out, and infused with various vitamins to turn them into functional pieces of hardware. …read more

Continue reading A True 3D Printed Weather Station→

ESP32 Weather Station on a PCB

Posted on by

We see lots of ESP8266 projects, but considerably fewer for the ESP32. So this good-looking weather station on a PCB using an ESP32 caught our eye. The board has a few sockets for common weather gear, but with a little modification, it would be a great carrier for an ESP32. Since the PCB layout is available, you could change things around to suit you. You can see a video from [Rui Santos] about his project and its progress from breadboard to PCB in the video below.

Assuming you build the board with no changes you have room for:

  • 2 SMD

…read more

Continue reading ESP32 Weather Station on a PCB→

Retrotechtacular: Weather Station Kurt

Posted on by

Sometimes when researching one Hackaday story we as writers stumble upon the one train of thought that leads to another. So it was with a recent look at an unmanned weather station buoy from the 1960s, which took us on a link to a much earlier automated weather station.

Weather Station Kurt was the only successful installation among a bold attempt by the German military during the Second World War to gain automated real-time meteorological data from the Western side of the Atlantic. Behind that simple sentence hides an extremely impressive technical and military achievement for its day. This was …read more

Continue reading Retrotechtacular: Weather Station Kurt→

Retrotechtacular: An Oceanographic Data Station Buoy For The 1960s

Posted on by

When we watch a TV weather report such as the ones that plaster our screens during hurricane season, it is easy to forget the scale of the achievement they represent in terms of data collection and interpretation. Huge amounts of data from a diverse array of sources feed weather models running on some of our most powerful computers, and though they don’t always forecast with complete accuracy we have become used to their getting it right often enough to be trustworthy.

It is also easy to forget that such advanced technology and the vast array of data behind it are …read more

Continue reading Retrotechtacular: An Oceanographic Data Station Buoy For The 1960s→

An Arduino Weather Station With An E-Ink Display

Posted on by

For our Northern Hemisphere readers the chill winds of winter are fast approaching, so it seems appropriate to feature a weather station project. Enjoy your summer, Southern readers!

[Fandonov] has created a weather station project with an Arduino Uno at its heart and a Waveshare e-ink display as its face to the world, and as its write-up (PDF) describes, it provides an insight into both some of the quirks of these displays, and into weather forecasting algorithms.

The hardware follows a straightforward formula, aside from Arduino and display it boasts an Adafruit sensor board and a hardware clock. Software-wise though …read more

Continue reading An Arduino Weather Station With An E-Ink Display→

TI 99/4A Weather Station

Posted on by

If you still have a drawer full of slap bracelets from the 1990s because, you know, they might come back, then you’ll appreciate [Vorticon’s] latest project. Sure, we see lots of weather stations, but this one is controlled by a TI 99/4A computer. This home computer from the 1980s was actually ahead of its time with a 16-bit processor.

The sensors use Xbee modules and an Arduino Uno. Of course, the Uno has more power than the TI computer, but that’s not really the point, right? He’s made a series of videos detailing the construction (you can see the first …read more

Continue reading TI 99/4A Weather Station→

IKEA Lantern Houses Full-Featured Weather Station

Posted on by

From plain and utilitarian to the sleek and professional, there are a lot of ways to build a multifunction weather station. We’d thought we’d seen it all here, but building a weather station into an IKEA lantern is a pretty unique presentation.

There’s  an active community over at ikeahackers.net, and the variety of IKEA hacks they’ve come up with is pretty astounding. For this weather hack, [Richard Stevens] chose the Borrby, a $15 candle lantern. While it doesn’t exactly scream “weather station”, the form factor makes sense – plenty of room for electronics, easily replaced windows, and a nice cupola …read more

Continue reading IKEA Lantern Houses Full-Featured Weather Station→

Solar-powered Weather Station Has the Complete Suite of Sensors

Posted on by

There was a time when getting weather conditions was only as timely or as local as the six o’clock news from the nearest big-city TV station. Monitoring the weather now is much more granular thanks to the proliferation of personal weather stations. For the ultimate in personalized weather, though, you might want to build your own solar powered weather station.

It looks like [Brian Masney] went all out in designing his weather station. It supports a full stack of sensors – wind speed and direction, rain, temperature, pressure, and dew point. About the only other parameters not supported (yet) are …read more

Continue reading Solar-powered Weather Station Has the Complete Suite of Sensors→