Category Archives: tutorial

How to Get Started with the ESP32

Posted on by

ESP32 is the hottest new wireless chip out there, offering both WiFi and Bluetooth Low Energy radios rolled up with a dual-core 32-bit processor and packed with peripherals of every kind. We got some review sample dev boards, Adafruit and Seeed Studio had them in stock for a while, and AI-Thinker — the company that makes the most popular ESP8266 modules — is starting up full-scale production on October 1st. This means that some of you have the new hotness in your hands right now, and the rest of you aren’t going to have to wait more than a few …read more

Continue reading How to Get Started with the ESP32→

Creating A PCB In Everything: Eagle DRC and Gerber Files

Posted on by

For the next post in the Creating A PCB series, we’re going to continue our explorations of Eagle. In Part 1,  I went over how to create a part from scratch in Eagle. In Part 2, we used this part to create the small example board from the Introduction.

This time around I’ll be going over Design Rule Check (DRC) — or making sure your board house can actually fabricate what you’ve designed. I’ll also be covering the creation of Gerber files (so you can get the PCB fabbed anywhere you want), and putting real art into the silkscreen and …read more

Continue reading Creating A PCB In Everything: Eagle DRC and Gerber Files→

Creating A PCB In Everything: Eagle, Part 2

Posted on by

In the last (and first) post in this series, we took a look at Eagle. Specifically, we learned how to create a custom part in Eagle. Our goal isn’t just to make our own parts in Eagle, we want to make schematics, boards, and eventually solder a few PCBs.

The board we’ll be making, like all of the boards made in this Creating A PCB In Everything series, is the Nanite Wesley, a small USB development platform based on the ATtiny85. This board has less than a dozen parts, most of which are through-hole. This is the simplest PCB I …read more

Continue reading Creating A PCB In Everything: Eagle, Part 2→

Making A PCB in Everything: Eagle, Part 1

Posted on by

For the first in a series of posts describing how to make a PCB, we’re going with Eagle. Eagle CAD has been around since the days of DOS, and has received numerous updates over the years. Until KiCad started getting good a few years ago, Eagle CAD was the de facto standard PCB design software for hobbyist projects. Sparkfun uses it, Adafruit uses it, and Dangerous Prototypes uses it. The reason for Eagle’s dominance in a market where people don’t want to pay for software is the free, non-commercial and educational licenses. These free licenses give you the ability to …read more

Continue reading Making A PCB in Everything: Eagle, Part 1→

Grinding Gears: Figuring Out The Ratio

Posted on by

Practically any combination of motor and gearbox can be mathematically arranged to fit all sorts of problems. You could lift a crane with a pager motor, it just might take a few hundred years. However, figuring out exactly what ratio you need can feel bit backwards the first time you have to do it.

A gear is nothing more than a clever way to make two circles rotate in concert with each other as if they were perfectly joined at their circumferences. Rather than relying on the friction between two rotating disks in contact, the designer instead relies on the …read more

Continue reading Grinding Gears: Figuring Out The Ratio→

Diodes With Hats: Zener and Schottky

Posted on by

For beginners, diode types can sometimes be a bit of mental gymnastics. If all it does is act like a magic pixie check valve, why are there so many kinds? Schottky diodes are typically  hard to mentally set apart from the standard when described by a data sheet. Zener diodes can be downright baffling for beginners, especially when mistakenly thrown in a circuit in place of a regular 1N4001. [Afrotechmods] put together a great video explaining their difference and use cases.

In both videos he does an excellent job of describing the pros and cons while setting up experiments to exhibit each. For the Schottky it’s …read more

Continue reading Diodes With Hats: Zener and Schottky→

Build Your Own Import Variable Lab Bench Power Supply

Posted on by

Does it ever just kill you that someone in a factory somewhere got to have all the fun of assembling your bench tools? There are a lot of questionable circuit boards floating around the Internet, and they can replicate practically any section of a circuit. When it comes to putting a prototype these days you can pretty much just buy each block of your system’s overview flowchart and string them together. [GreattScott!] combines a few of these into a relatively useful variable power supply with current limiting.

Admittedly, this is more of academic exercise if your only metric for success …read more

Continue reading Build Your Own Import Variable Lab Bench Power Supply→

Sage Advice for the New Ham

Posted on by

If you’re on the edge about getting your amateur radio license, just go do it and worry about the details later. But once you’ve done that, you’re going to need to know a little bit about the established culture and practices of the modern ham — the details.

Toward that end, [McSteve] has written up a (so far) two-part introductory series about ham radio. His first article is fairly general, and lays out many of the traditional applications of ham radio: chatting with other humans using the old-fashioned analog modes. You know, radio stuff.

The second article focuses more on …read more

Continue reading Sage Advice for the New Ham→

Python Autopsy Module Tutorial #3: The Report Module

Posted on by

It’s time for the final Python tutorial in this series and just in time to give you a chance to write something for the OSDFCon Autopsy Module Competition. In our last two blog posts, we built Python Autopsy file ingest modules that analyzed the data sources as they were added to cases. In our third […] Continue reading Python Autopsy Module Tutorial #3: The Report Module→