Category Archives: MRRF

MRRF 17: Laser Resin Printers

Posted on by

The Midwest RepRap Festival is the best 3D printer con on the planet. In the middle of Indiana, you’ll find the latest advances for CNC hot glue guns and the processes that make squirting filament machines better, more accurate, and more efficient. There’s more to 3D printing than just filament-based machines, though, and for the last few MRRFs we’ve been taking a look at resin-based machines.

While most of the current crop of resin printers use either DLP projectors or LCDs and a big, bright backlight [Mark Peng]’s Moai printer uses a 150 mW laser diode and galvos. This is …read more

Continue reading MRRF 17: Laser Resin Printers→

MRRF 17: True Color 3D Printing

Posted on by

3D printing has evolved to a point where dual extrusion isn’t really that special anymore. A few years ago, a two-color frog print would have been impressive, but this isn’t the case anymore. The Midwest RepRap Festival is all about the bleeding edge of what 3D printers are capable of, and this year is no exception. This year, we were graced with a few true multicolor filament-based 3D printers. The biggest and best comes from [Daren Schwenke]. His Arcus 3D printer is a full color, CMYKW mixing printer that’s able to print in any color imaginable.

The electronics for this …read more

Continue reading MRRF 17: True Color 3D Printing→

MRRF 17: Lulzbot and IC3D Release Line Of Open Source Filament

Posted on by

Today at the Midwest RepRap Festival, Lulzbot and IC3D announced the creation of an Open Source filament.

While the RepRap project is the best example we have for what can be done with Open Source hardware, the stuff that makes 3D printers work – filament, motors, and to some extent the electronics – are tied up in trade secrets and proprietary processes. As you would expect from most industrial processes, there is an art and a science to making filament and now these secrets will be revealed.

IC3D Printers is a manufacturer of filament based in Ohio. This weekend at …read more

Continue reading MRRF 17: Lulzbot and IC3D Release Line Of Open Source Filament→

MRRF 17: The Infinite Build Volume Printer

Posted on by

Before we dig into this one, a bit of a history lesson is in order. In 2010, MakerBot released the Automated Build Platform for the MakerBot Cupcake. This build platform was like nothing seen before or since. It’s a combination build platform and a conveyor belt for a 3D printer, allowing the Cupcake to become a completely automated production machine. Start a print, let the machine run, and when the print is finished it’s rolled off the bed into a bin, allowing a second print to start. If you’re using 3D printers for production in a manufacturing context – like …read more

Continue reading MRRF 17: The Infinite Build Volume Printer→

Two Weeks Until The Greatest 3D Printer Meetup On The Planet

Posted on by

Every year, sometime in March, the world’s preeminent 3D printing enthusiasts gather in the middle of nowhere This is MRRF, the Midwest RepRap Festival. It’s only two weeks away. You need to come. Get your (free) tickets here. I’ll be there, and Hackaday is proud to once again sponsor the festival.

I need to backtrack a bit to explain why MRRF is so great. I go to a lot of cons. Maker Faire is getting old, CES was a horror show. Even DEF CON is losing its charm, and all of these cons have the same problem: there are too …read more

Continue reading Two Weeks Until The Greatest 3D Printer Meetup On The Planet→

Hackaday Links: February 26, 2017

Posted on by

The MeArm Pi is a fantastic little robot kit that was the first place winner of the Enlightened Pi contest here on Hackaday. It’s crushing the Shitty Robots subreddit, and compared to the old MeArm kit, it’s much, much simpler to assemble. Ask me how I know. Now the MeArm Pi is a Kickstarter. This tiny robot arm is programmable in everything from Scratch to Perl. It’s highly recommended for children ages 8 to those wanting to recreate the opening scene of Pee Wee’s Big Adventure.

Almost a year ago, Lulzbot unveiled their latest 3D printer at the Midwest RepRap …read more

Continue reading Hackaday Links: February 26, 2017→

The State Of 3D Printing At MRRF

Posted on by

Only a few days ago, a significant proportion of the Hackaday crew was leaving Goshen, Indiana after the fourth annual Midwest RepRap Festival. We go to a lot of events every year, and even when you include DEF CON, security conferences, ham swap meets, and Maker Faires, MRRF is still one of the best. The event itself is an odd mix of people rallying under a banner of open source hardware and dorks dorking around with 3D printer. It’s very casual, but you’re guaranteed to learn something from the hundreds of attendees.

Hundreds of people made the trek out to …read more

Continue reading The State Of 3D Printing At MRRF→

Ask Hackaday MRRF Edition: 3D Printers Can Catch Fire

Posted on by

[Jay] out of the River City Labs Hackerspace in Peoria, IL cleared out a jam in his printer. It’s an operation most of us who own a 3D printer have performed. He reassembled the nozzle, and in a moment forgot to tighten down the grub nut that holds the heater cartridge in place. He started a print, saw the first layer go down right, and left the house at 8:30 for work. When he came back from work at 10:30 he didn’t see the print he expected, but was instead greeted by acrid smoke and a burnt out printer.

As …read more

Continue reading Ask Hackaday MRRF Edition: 3D Printers Can Catch Fire→

Hackaday Links: March 6, 2016

Posted on by

There’s the R2 Builders Club, hundreds of people are building BB-8, but there are a few robots that don’t get enough love from the amateur propsmiths. [Kenneth] just finished up his build of Crow from MST3K. He built Tom Servo a year or so ago and K-9 from Doctor Who. The beautiful thing about building MST3K robots and Doctor Who props is that you’re probably working with a larger budget than the prop department had.

Heathkit’s new website is up. The two products we know about so far – an AM radio kit and a slim jim antenna – can …read more

Continue reading Hackaday Links: March 6, 2016→