Raspberry Pi Learns Slow Morse Code

It wasn’t long ago that you needed to know Morse code to be a ham radio operator. That requirement has gone in most places, but code is still useful and many hams use it, especially hams that like to hack. Now, hams are using the Raspberry Pi to receive highly readable Morse code using very low power. The software is QrssPiG and it can process audio or use a cheap SDR dongle.

There are a few reasons code performs better than voice and many other modes. First, building transmitters for Morse is very simple. In addition, Morse code is highly …read more

Continue reading Raspberry Pi Learns Slow Morse Code

A Vintage Morse Key Turned into USB Keyboard

Time was when only the cool kids had new-fangled 102-key keyboards with a number pad, arrow keys, and function keys. They were such an improvement over the lame old 86-key layout that nobody would dream of going back. But going all the way back to a one-key keyboard is pretty cool, in the case of this Morse keyer to USB keyboard adapter.

To revive her dad’s old straight key, a sturdy mid-20th century beast from either a military or commercial setup, [Nomblr] started with a proper teardown and cleaning of the brass and Bakelite pounder. A Teensy was chosen for …read more

Continue reading A Vintage Morse Key Turned into USB Keyboard

Mindstorms Morse Key Writes to Drawbot

[Jason Allemann] built a Mindstorms Telegraph Machine that packs so many cool details that HaD is about to have a fit.

First off, It’s a drawbot able to write letters, a difficult feat given a lack of native stepper motors and the limited gear options for Mindstorms.  Trying to draw letters with servos typically makes for some ugly letters. And how does the drawbot know what to write? You code them in with Morse code. The second video after the break shows [Jason]’s setup. He has a Mindstorms touch sensor with a LEGO Morse key attached to it. He simply …read more

Continue reading Mindstorms Morse Key Writes to Drawbot

World’s Thinnest Morse Code Touch Paddle

Morse code enthusiasts can be picky about their paddles. After all, they are the interface between the man and the machine, and experienced telegraphers can recognize each other by their “hands”. So even though [Edgar] started out on a cheap, clicky paddle, it wouldn’t be long before he made a better one of his own. And in the process, he also made what we think is probably the thinnest paddle out there, being a single sheet of FR4 PCB material and a button cell battery. This would be perfect for a pocketable QRP (low-power) rig. Check it out in action …read more

Continue reading World’s Thinnest Morse Code Touch Paddle

Early Electromechanical Circuits

In the days before semiconductor diodes, transistors, or even vacuum tubes, mechanical means were used for doing many of the same things. But there’s still plenty of fun to be had in using those mechanical means today, as [Manuel] did recently with his relay computer. This post is a walk through some circuits that used those mechanical solutions before the invention of the more electronic and less mechanical means came along.

Coherer Morse Code Receiver

The circuit shown below is a fun one, especially if you’ve played with crystal radios. It receives Morse code that’s transmitted as bursts of radio …read more

Continue reading Early Electromechanical Circuits

Tiny Morse Code USB Keyboard

We’ve featured quite a few of [mitxela]’s projects here in the past, and many of them have the propensity to be labelled “smallest”. His Morse Code USB Keyboard Mk II adds to that list. It’s a Saturday afternoon project, with a few parts slapped onto a piece of perf-board, that allows using a Morse key as a USB keyboard. This project isn’t new or fresh, but we stumbled across it while trying to figure out a use for a Morse key lying in the author’s bin of parts. You can practise transmitting, by reading text and typing it out on …read more

Continue reading Tiny Morse Code USB Keyboard

A Beautiful Morse Key From A Hard Drive Actuator

Morse code, or CW, is a subject that divides the amateur radio community from top to bottom. For some it’s a faded anachronism, while for others it’s the purest form of the art. With it no longer in significant commercial or military use it is radio amateurs who keep it alive, and those for whom it is a passion devote considerable effort to its continuing use.

With well over a century of history behind it there are a huge array of morse keys available to the CW enthusiast. From vintage telegraph keys through WW2 surplus military keys to sideways “bug” …read more

Continue reading A Beautiful Morse Key From A Hard Drive Actuator

Need an enclosure? Try Scrap Wood with Toner Transfer Labels

This utilitarian-looking device takes an unusual approach to a problem that many projects face: enclosures. [Jan Mrázek] created a device he calls the Morse Thing for a special night’s event and used what appears to be a humble two-by-four plank for the enclosure. The device is a simple puzzle using Morse code and was intended to be mounted to a railing, so [Jan] milled out the necessary spaces and holes for the LCD and buttons then applied labels directly to the wood via toner transfer – a method commonly used for making PCBs but also useful to create clean, sharp …read more

Continue reading Need an enclosure? Try Scrap Wood with Toner Transfer Labels

Minimal Computer and Operating System: One Button, One LED

DUO BINARY is a very, very small computer system in every possible sense. It runs on an ATtiny84, which has even got “tiny” in its name. The user interface is a single button for data entry and a single LED for feedback, making this binary keyboard look frivolously over-complicated. It uses a devilish chimera of Morse code and a truncated ASCII to enter data, and the LED blinks the same back at you.

We’re guessing that [Jack Eisenmann] is the only person in the world who can control this thing, and you can watch him doing so in the video …read more

Continue reading Minimal Computer and Operating System: One Button, One LED

Morse Code: Paris in the Mint Box

[Rob Bailey] likes to build things and he likes ham radio. We are guessing he likes mints too since he’s been known to jam things into Altoids tins. He had been thinking about building a code practice oscillator in a Altoids Smalls tin, but wasn’t sure he could squeeze an Arduino Pro Mini in there too. Then he found the TinyLily Mini. The rest is history, as they say, and 1CPO was born.

The TinyLily Mini is a circular-shaped Arduino (see right) about the size of a US dime. most of the pads are arranged around the circle and there …read more

Continue reading Morse Code: Paris in the Mint Box