Category Archives: contest

Packing 10 into 1: A Square Inch Dekatron Replacement

Posted on by

One of the things that always attracts our eye in old movies is how many kinds of displays you see on old gear both real and imaginary. Really old stuff usually had meters or circular recorders. But slightly newer movies often had some kind of exotic digital display with Nixes or Numitron tubes. One of the really exotic display devices was a Dekatron. While these are pretty rare, you can make a stand-in using modern LEDs and [Dave] did just that in an entry into our square inch competition.

These were gas-filled tubes with ten positions. You had to reset …read more

Continue reading Packing 10 into 1: A Square Inch Dekatron Replacement→

Less is More: A Micromatrix Display in a Square Inch

Posted on by

In your living room, the big display is what you want. But in an embedded project, often less is more. We think [bobricius] will agree since he submitted a tiny 4×5 LED display into our square inch challenge. The board features an ATtiny CPU and twenty SMD LEDs in a nice grid. You can see them in action, scrolling to some disco music in the video below.

There is plenty of room left in the CPU for bigger text strings — the flash memory is just over 10% full. A little side-mounted header makes it easy to program the chip …read more

Continue reading Less is More: A Micromatrix Display in a Square Inch→

How Big is Your Oscilloscope? One Inch?

Posted on by

We are anxious to see the finished product of [Mark Omo’s] entry into our one square inch project. It is a 20 megasample per second oscilloscope that fits the form factor and includes a tiny OLED screen. We will confess that we started thinking if you could use these as replacements for panel meters or find some other excuse for it to exist. We finally realized, though, that it might not be very practical but it is undeniably cool.

There are some mockup PCB layouts, but the design appears feasible. A PIC32MZ provides the horsepower. [Mark] plans to use an …read more

Continue reading How Big is Your Oscilloscope? One Inch?→

One Square Inch Expanded in the Time Dimension

Posted on by

No, we’re not talking about spooky feats of General Relativity. But you should know that the Return of the Square Inch Project just got its deadline extended.

If you missed the call the first time around, our favorite user-contributed contest on Hackaday.io is up and running again. Hackaday.io tossed in some good money for prizes, and folks started thinking about what functionality they could cram inside a 25.4 mm x 25.4 mm square. But while one constraint can help bring out creativity, adding a tight deadline to a tight squeeze caused a number of our entrants to ask for an …read more

Continue reading One Square Inch Expanded in the Time Dimension→

Competitive Soldering is Now a Thing

Posted on by

At Hackaday, we’re constantly impressed by the skill and technique that goes into soldering up some homebrew creations. We’re not just talking about hand-soldering 80-pin QFNs without a stencil, either: there are people building charlieplexed LED arrays out of bare copper wire, and using Kynar wire for mechanical stability. There are some very, very talented people out there, and they all work in the medium of wire, heat, and flux.

At this year’s DEF CON, we opened the floodgates to competitive soldering. Along with [Bunny] from Hardware Hacking Village and the many volunteers from the HHV and Soldering Skills Village, …read more

Continue reading Competitive Soldering is Now a Thing→

Unofficial Badges Get Official Recognition at DEF CON: Badge Life Contest

Posted on by

Badge·Life (noun): the art of spending too much time, energy, money, and creativity to design and produce amazing custom electronics and get them into the hands of those who appreciate incredible craftsmanship.

Brand new to DEF CON 26 is the Badge Life Contest to celebrate the creativity and ingenuity that gets poured into a custom badge.

For years, #BadgeLife has been flying under the radar at DEF CON. A growing movement of creative designers have put in late nights, emptied pocket books, and agonized over production, shipping, lanyards, boxes, batteries, programming woes, and every other kind of problem you …read more

Continue reading Unofficial Badges Get Official Recognition at DEF CON: Badge Life Contest→

Thinking Inside The (Cardboard) Box With Nintendo Labo Hacks

Posted on by

Cardboard is one of the easiest ways to build something physical, far easier than the 3D printing and laser cutting we usually write about here. So when Nintendo released their Labo line of cardboard accessories, it doesn’t take a genius to predict the official product would be followed by a ton of user creations. Nintendo were smart enough to provide not only an internet forum for this creativity to gather, they also hold contests to highlight some of the best works.

The most impressive projects in the winner’s circle combined the one-of-a-kind cardboard creations with custom software written using Toy-Con …read more

Continue reading Thinking Inside The (Cardboard) Box With Nintendo Labo Hacks→

Hot Camera Contest: Build A Battery Powered Thermal Camera

Posted on by

Here’s a challenge for all you hardware hackers out there. Peter Jansen has opened up the Hot Camera Contest on Hackaday.io to use a thermal imaging camera in a battery-powered project.

The challenge here is simple. Use a Flir Lepton thermal imaging camera module in a battery-powered configuration. There’s a catch, though: this is a project to use the Lepton in radiometric mode, where the camera spits out an actual temperature value for each pixel. Yes, this is a documented feature in the Flir Lepton module, but so far very few people are using it, and no one has done …read more

Continue reading Hot Camera Contest: Build A Battery Powered Thermal Camera→

Hackaday Links: February 11, 2018

Posted on by

Are you a student? Are you part of a hackerspace? We have a contest going on right now where you can win a fancy new Prusa i3 MK3. The Repairs You Can Print contest is a challenge to do something useful with that machine that spits out tugboats. We’re looking for functional repairs of items around your house, office, or garage. Did you repair something with a 3D printer? Then you too can get in on the action! Enter now! Check out the entries!

You may know Flite Test as the group who do everything surrounding remote control flight (mostly …read more

Continue reading Hackaday Links: February 11, 2018→

Hackaday Links: January 28, 2018

Posted on by

In case you haven’t heard, we have a 3D printing contest going on right now. It’s the Repairs You Can Print Contest. The idea is simple: show off how you repaired something with a 3D printer. Prizes include $100 in Tindie credit, and as a special prize for students and organizations (think hackerspaces), we’re giving away a few Prusa i3 MK3 printers.

[Drygol] has made a name for himself repairing various ‘home’ computers over the years, and this time he’s back showing off the mods and refurbishments he’s made to a pile of Amiga 500s. This time, he’s installing some …read more

Continue reading Hackaday Links: January 28, 2018→