Author Archives: Moritz Walter

Hackaday Prize Entry: MyComm Handheld Satellite Messenger

Posted on by

We live in a connected world, but that world ends not far beyond the outermost cell phone tower. [John Grant] wants to be connected everywhere, even in regions where no mobile network is available, so he is building a solar powered, handheld satellite messenger: The MyComm – his entry for the Hackaday Prize.

The MyComm is a handheld touch-screen device, much like a smartphone, that connects to the Iridium satellite network to send and receive text messages. At the heart of his build, [John] uses a RockBLOCK Mk2 Iridium SatComm Module hooked up to a Teensy 3.1. The firmware is …read more

Continue reading Hackaday Prize Entry: MyComm Handheld Satellite Messenger→

EV History: The Lightning Precedes The Thunder

Posted on by

In 1988, a bunch of engineers from Hotzenwald, East Germany, came together and decided that it is time for the future of mobility: A new, more modern and environmentally friendly car should put an end to fossils and emissions while still being fun to drive. “It should become a new kind of car. Smaller, lighter, cleaner – and more beautiful” is how future CEO Thomas Albiez described his mission. For the first time in automotive history, this series car would be designed as an all-electric vehicle from the start and set a new standard for mobility. The project was given …read more

Continue reading EV History: The Lightning Precedes The Thunder→

Hackaday Prize Entry: DIY Automatic Tool Changer

Posted on by

Choosing between manually changing endmill bits on a CNC machine and investing in an expensive automated solution? Not for [Frank Herrmann], who invented the XATC, an eXtremely simple Automated Tool Changer. [Frank’s] ingenious hack achieves the same functionality as an industrial tool changer using only cheap standard hardware you might have lying around the workshop.

Like many ATCs, this one features a tool carousel. The carousel, which is not motorized, stores each milling bit in the center bore of a Gator Grip wrench tool. To change a tool, a fork wrench, actuated by an RC servo, blocks the spindle shaft, …read more

Continue reading Hackaday Prize Entry: DIY Automatic Tool Changer→

How Lasers Actually Work

Posted on by

Lasers are optical amplifiers, optical oscillators, and in a way, the most sophisticated light source ever invented. Not only are lasers extremely useful, but they are also champions of magnitude: While different laser types cover the electromagnetic spectrum from radiation (<10 nm) over the visible spectrum to far infrared light (699 μm), their individual output band can be as narrow as a few µHz. Their high temporal and spatial coherence lets them cover hundreds of meters in a tight beam of lowest divergence as a perfectly sinusoidal, electromagnetic wave. Some lasers reach peak power outputs of several exawatts, while their …read more

Continue reading How Lasers Actually Work→

Soldering Challenge To Challenge You

Posted on by

[Rick] knew that the blinking, beeping microcontroller kits that are commonly used for educational soldering workshops just would not cut it for a serious combat among SMD reworking professionals. The “Soldering Challenge” he created to fill this gap is a little PCB with eight difficulty levels from large through hole components to the smallest hand solderable SMDs. After assembly, the circuit assesses the skill level of the soldering aspirant based on a built-in scoring system.

The challenge is meant to be played on a time limit. There are no two same-sized components of different value, so contestants may focus on …read more

Continue reading Soldering Challenge To Challenge You→

How To Set Up And Run A Makerspace

Posted on by

A bunch of people who share a large workshop and meet on a regular basis to do projects and get some input. A place where kids can learn to build robots instead of becoming robots. A little community-driven factory, or just a lair for hackers. The world needs more of these spaces, and every hackerspace, makerspace or fab lab has its very own way of making it work. Nevertheless, when and if problems and challenges show up – they are always the same – almost stereotypically, so avoid some of the pitfalls and make use of the learnings from almost …read more

Continue reading How To Set Up And Run A Makerspace→

Hackaday Prize Entry: Micro Robots For Education

Posted on by

[Joshua Elsdon] and [Thomas Branch] needed a educational hardware platform that would fit into the constrained spaces and budgets of college classes. Because nothing out there that was cheap, simple and capable enough to fit their program, the two teachers for robotics at the Imperial College Robotics Society set out to build their own – and entered the Hackaday Prize with a legion of open source Micro Robots.

These small robots have a base area of 2 cm2 and a price tag of about £10 (about $14) each, once they are produced in quantities. They feature two onboard stepper …read more

Continue reading Hackaday Prize Entry: Micro Robots For Education→

Hackaday Prize Entry: Project Man-Cam

Posted on by

With cameras, robotics, VR-headsets, and wireless broadband becoming commodities, the ultimate, mobile telepresence system – “Surrogates” if you will – is just one footstep away. And this technology may one day solve a very severe problem for many disabled people: Mobility. [chris jones] sees great potential in remote experiences for disabled people who happen to not be able to just walk outside. His Hackaday Prize Entry Project Man-Cam, a clever implementation of “the second self”, is already indistinguishable from real humans.

Instead of relying on Boston Dynamic’s wonky hydraulics or buzzing FPV drones, [chris] figured that he could just strap  …read more

Continue reading Hackaday Prize Entry: Project Man-Cam→

There’s a Pi In Mike’s Fridge

Posted on by

How often have you stood in the supermarket wondering about the inventory level in the fridge at home? [Mike] asked himself this question one time too often and so he decided to install a webcam in his fridge along with a Raspberry Pi and a light sensor to take a picture every time the fridge is opened — uploading it to a webserver for easy remote access.

If building IoT products is your daily bread, you will probably be able to replicate [Mike’s] build in a matter of hours, but [Mike] is kind of new to programming, electronics and especially …read more

Continue reading There’s a Pi In Mike’s Fridge→

Meet Blue Jay, The Flying Drone Pet Butler

Posted on by

20 students of the Eindhoven University of Technology (TU/e) in the Netherlands share one vision of the future: the fully domesticated drone pet – a flying friend that helps you whenever you need it and in general, is very, very cute. Their drone “Blue Jay” is packed with sensors, has a strong claw for grabbing and carrying cargo, navigates autonomously indoors, and interacts with humans at eye level.

To demonstrate their flying buddy, the team installed the drone café – a café in which visitors were served drinks by the interactive drone. The café was open for only a few …read more

Continue reading Meet Blue Jay, The Flying Drone Pet Butler→