Author Archives: Moritz Walter

Hackaday Prize Entry: Shakelet

Posted on by

A person who is deaf can’t hear sound, but that doesn’t mean they can’t feel vibrations. For his Hackaday Prize entry, [Alex Hunt] is developing the Shakelet, a vibrating wristband for that notifies hearing impaired people about telephones, doorbells, and other sound alerts.

To tackle the difficulty of discriminating between the different sounds from different sources, [Alex’s] wants to attach little sound sensors directly to the sound emitting devices. The sensors wirelessly communicate with the wristband. If the wristband receives a trigger signal from one of the sensors, it alerts the wearer by vibrating. It also shows which device triggered …read more

Continue reading Hackaday Prize Entry: Shakelet→

Hackaday Prize Entry: Open Source FFT Spectrum Analyzer

Posted on by

Every machine has its own way of communicating with its operator. Some send status emails, some illuminate, but most of them vibrate and make noise. If it hums happily, that’s usually a good sign, but if it complains loudly, maintenance is overdue. [Ariel Quezada] wants to make sense of machine vibrations and draw conclusions about their overall mechanical condition from them. With his project, a 3-axis Open Source FFT Spectrum Analyzer he is not only entering the Hackaday Prize 2016 but also the highly contested field of acoustic defect recognition.

For the hardware side of the spectrum analyzer, [Ariel] equipped …read more

Continue reading Hackaday Prize Entry: Open Source FFT Spectrum Analyzer→

42,300 Transistor Megaprocessor Is Complete

Posted on by

As it turns out, the answer is not 42, it’s 42.3 — thousand. That’s how many discrete transistors spread across the 30 m2 room housing this massive computation machine. [James Newman’s] Megaprocessor, a seriously enlarged version of a microprocessor, is a project we’ve been following with awe as it took shape over the last couple of years.

[James] documented his work in great detail, and by doing so, took us on a journey through the inner workings of microprocessors. His monumental machine is now finished, and it’s the ultimate answer to how a processor – and pretty much everything …read more

Continue reading 42,300 Transistor Megaprocessor Is Complete→

Build A 3D Printer Workhorse, Not an Amazing Disappointment Machine

Posted on by

3D printers have become incredibly cheap, you can get a fully workable unit for $200 – even without throwing your money down a crowdfunded abyss. Looking at the folks who still buy kits or even build their own 3D printer from scratch, investing far more than those $200 and so many hours of work into a machine you can buy for cheap, the question “Why the heck would you do that?” may justifiably arise.

The answer is simple: DIY 3D printers done right are rugged workhorses. They work every single time, they never break, and even if: they are an …read more

Continue reading Build A 3D Printer Workhorse, Not an Amazing Disappointment Machine→

Hackaday Prize Entry: Cheap, Open LiDAR

Posted on by

[adam] is a caver, meaning that he likes to explore caves and map their inner structure. This is still commonly done using traditional tools, such as notebooks (the paper ones), tape measure, compasses, and inclinometers. [adam] wanted to upgrade his equipment, but found that industrial LiDAR 3D scanners are quite expensive. His Hackaday Prize entry, the Open LIDAR, is an affordable alternative to the expensive industrial 3D scanning solutions out there.

LiDAR — Light Detection And Ranging —  is the technology that senses the distance between a sensor and an object by reflectively measuring the time of flight of a …read more

Continue reading Hackaday Prize Entry: Cheap, Open LiDAR→

Hackaday Prize Entry: ESP Swiss Knife

Posted on by

The best equipment won’t help you if you don’t have it with you in the moment you need it. Knowledge, experience, and a thick skin may help you out there in the mud of the hardware battlegrounds, but they can’t replace a multimeter, an oscilloscope, a logic analyzer, a serial console or a WiFi access point. [Arcadia Labs] has taken on the challenge of combining most of these functions into a single device, developing the Hacker’s equivalent of a Swiss Army Knife: The ESP Swiss Knife.

Just like a Swiss Army Knife is first and foremost a knife, the EPS …read more

Continue reading Hackaday Prize Entry: ESP Swiss Knife→

Hackaday Prize Entry: Dtto Modular Robot

Posted on by

A robot to explore the unknown and automate tomorrow’s tasks and the ones after them needs to be extremely versatile. Ideally, it was capable of being any size, any shape, and any functionality, shapeless like water, flexible and smart. For his Hackaday Prize entry, [Alberto] is building such a modular, self-reconfiguring robot: Dtto.

To achieve the highest possible reconfigurability, [Alberto’s] robot is designed to be the building block of a larger, mechanical organism. Inspired by the similar MTRAN III, individual robots feature two actuated hinges that give them flexibility and the ability to move on their own. A coupling mechanism …read more

Continue reading Hackaday Prize Entry: Dtto Modular Robot→

Brasilia Espresso Machine PID Upgrade Brews Prefect Cup of Energy

Posted on by

Coffee, making and hacking addictions are just bound to get out of control. So did [Rhys Goodwin’s] coffee maker hack. What started as a little restoration project of a second-hand coffee machine resulted in a complete upgrade to state of the art coffee brewing technology.

The Brasilia Lady comes with a 300 ml brass boiler, a pump and four buttons for power, coffee, hot water and steam. A 3-way AC solenoid valve, wired directly to the buttons, selects one of the three functions, while a temperamental bimetal switch keeps the boiler roughly between almost there and way too hot.

To …read more

Continue reading Brasilia Espresso Machine PID Upgrade Brews Prefect Cup of Energy→

Interactive WeddingBots Built Into Nespresso Capsules

Posted on by

Today is a very special day for [Mandy and Sebastian], as they conclude the sacred solder joint of marriage. We send our sincerest congratulations and best wishes to the bridal couple, and can’t help but envy the guests of their ceremony, who received a very special wedding favor: A WeddingBot.

In search for a party game that was up for the task, [Mandy and Sebastian] created a little game on their own (translated). Each guest would receive a unique, little WeddingBot. Each bot is individually tailored for a certain guest and features a fitting look, a characteristic behavior and would …read more

Continue reading Interactive WeddingBots Built Into Nespresso Capsules→

Hackaday Prize Entry: Invisible

Posted on by

[Kate Reed] found a quote by a homeless that said “No one sees us”, which led her to exploring what it actually means to be invisible — and if we actually choose to be invisible by hiding away our emotions, sexual preference, race or income. She realized that too often, we choose to only see what we want to see, rendering all the rest invisible by looking away. Her public art campaign and Hackaday Prize entry “Invisible” aims to increase social awareness and strengthening the community by making hidden thoughts, feelings and needs visible.

Inspired by the artist [Jin Young …read more

Continue reading Hackaday Prize Entry: Invisible→