Author Archives: James Hobson

Hack Together A Whack-A-Mole In A Box!

Posted on by

Here’s a project that you can throw together in an afternoon, provided you have the parts on hand, and is certain to entertain. Hackaday.io user [SunFounder] walks us through the process of transforming a humble cardboard box into a whack-a-mole game might be just the ticket to pound out some stress or captivate any children in the vicinity.

A multi-control board and nine arcade buttons are the critical pieces of hardware here, with wires and a USB cable rounding out  the rest of the electronics. Separate the button core from the upper shell, mounting the shell in the …read more

Continue reading Hack Together A Whack-A-Mole In A Box!→

How Low-Power Can You Go?

Posted on by

[lasersaber] has a passion: low-power motors. In a bid to challenge himself and inspired by betavoltaic cells, he has 3D printed and built a small nuclear powered motor!

This photovoltaic battery uses fragile glass vials of tritium extracted from keychains and a small section of a solar panel to absorb the light, generating power. After experimenting with numerous designs, [lasersaber] went with a 3D printed pyramid that houses six coils and three magnets, encapsulated in a glass cloche and accompanied by a suitably ominous green glow.

Can you guess how much power and current are coursing through this thing? Guess …read more

Continue reading How Low-Power Can You Go?→

An Environmentally Conscious, Solar-Powered Throwie

Posted on by

The basic throwie is a a type of street art/graffiti/vandalism — depending on where you stand — consisting of a coin cell, an led, and a magnet taped together. Seeking to be a slightly more eco-friendly troublemaker, [Alaric Loftus] has kindly put together an Instructable on how to build a solar-powered throwie!

In order to be the best maker of mischief possible, [Alaric Loftus] tried a number of different products to find one that was hackable,  supplied the right voltage, had the right form factor, and cheap enough to literally throw away. Turns out, garden path lights hit …read more

Continue reading An Environmentally Conscious, Solar-Powered Throwie→

Mouse Mis-Clicking? We Got You.

Posted on by

A mouse with malfunctioning buttons can be a frustrating to deal with — and usually a short leap to percussive maintenance. Standard fixes may not always last due to inferior build quality of the components, or when the microswitch won’t close at all. But, for mice that double/triple-click, will release when dragging, or mis-click on release, this Arduino-based hack may be the good medicine you’re after.

Instructables user [themoreyouknow]’s method cancels click malfunctions by latching the mouse’s controller switch trace to ‘on’ when pressed, keeping it there until the button normally closed contact closes again completely. Due to the confined …read more

Continue reading Mouse Mis-Clicking? We Got You.→

AI Watches You Sleep; Knows When You Dream

Posted on by

If you’ve never been a patient at a sleep laboratory, monitoring a person as they sleep is an involved process of wires, sensors, and discomfort. Seeking a better method, MIT researchers — led by [Dina Katabi] and in collaboration with Massachusetts General Hospital — have developed a device that can non-invasively identify the stages of sleep in a patient.

Approximately the size of a laptop and mounted on a wall near the patient, the device measures the minuscule changes in reflected low-power RF signals. The wireless signals are analyzed by a deep neural-network AI and predicts the various sleep stages …read more

Continue reading AI Watches You Sleep; Knows When You Dream→

Boredom + Lasers = Projector!

Posted on by

[Krazer], a post-doctoral researcher at MIT, loves him some lasers. When out of boredom one afternoon he hatched an idea for a laser projector, it grew until a few years later he wound up with this RGB laser for a projector — Mark IV no less.

In addition to 3D-printing the parts, the major innovation with this version is the ability to re-align the lasers as needed; tweaking the vertical alignment is controlled by a screw on the laser mounts while the horizontal alignment is done the same way on the mirror mounts. This simplifies the design and reduces the …read more

Continue reading Boredom + Lasers = Projector!→

Spoiler Alert! Repairing A Race Car Can Get Complicated, Fast.

Posted on by

[Big Fish Motorsports] has a vehicle with an adjustable rear spoiler system that broke in the lead up to a big race. The original builder had since gone AWOL so the considerable talents of [Quinn Dunki] were brought to bear in getting it working again.

Cracking open the black control box of mystery revealed an Arduino, a ProtoShield and the first major road block: the Arduino remained stubbornly incommunicado despite several different methods of trying to read the source code. Turns out the Arduino’s ATMega324 was configured to be unreadable or simply fried, but an ATMega128 [Quinn] had proved to …read more

Continue reading Spoiler Alert! Repairing A Race Car Can Get Complicated, Fast.→

Project Kino: Robotic Jewelry And Tech Accessory

Posted on by

Researchers from MIT and Stanford are taking the ‘person’ in ‘personal assistant’ to mean something more literal with these robots that scurry around on the user’s clothing.

Project Kino — inspired by living jewelry — are robotic accessories that use magnetic gripping wheels on both sides of the clothing to move about. For now they fill a mostly aesthetic function, creating kinetic accents to one’s attire, but one day they might be able to provide more interactive functionality. They could act as a phone’s mic, adjust clothing to suit the weather, function as high-visibility wear for cyclists or joggers, as …read more

Continue reading Project Kino: Robotic Jewelry And Tech Accessory→

Fresh-Pressed Clothes Courtesy of TEO, the Iron Man

Posted on by

As with many tasks, robots may soon be ironing our clothes for us before we leave for work. Built by a team from the University Carlos III de Madrid’s robotics lab in Getafe, Spain, TEO is a highly articulated robot, that can climb stairs, open doors, and has recently added ironing to its skill set.

Data from a depth-sensing camera in TEO’s head is combed over by an algorithm, breaking it down into thousands of points — 0 being smooth and 1 a defined line in the clothing. Comparing those point values to those of its neighbours allows TEO to …read more

Continue reading Fresh-Pressed Clothes Courtesy of TEO, the Iron Man→

Wield The Power of Molten Metal

Posted on by

[TheBackyardScientist] at it again with another super villain-esque demonstration of gadgetry: a liquid metal squirt gun.

The squirt gun has a compressed air tank like most others — more on that later — but to fire its primary ammunition, a nozzle that connects directly to an air compressor is needed. Again, like most guns of this nature, air is forced into the gun’s reservoir, displacing the pewter and expelling it out the gun’s barrel. Yes, pewter.

Working around the heat tolerances of thread seal tape, pewter has a low enough melting point that an airtight system is preserved — plus …read more

Continue reading Wield The Power of Molten Metal→