Tag Archives: Radio

Everyone Should Build At Least One Regenerative Radio Receiver

Posted on by

When we build an electronic project in 2016, the chances are that the active components will be integrated circuits containing an extremely large amount of functionality in a small space. Where once we might have used an op-amp or two, a 555 timer, or a logic gate, it’s ever more common to use a microcontroller or even an IC that though it presents an analog face to the world does all its internal work in the digital domain.

There was a time when active components such as tubes or transistors were likely to be significantly expensive, and integrated circuits, if …read more

Continue reading Everyone Should Build At Least One Regenerative Radio Receiver→

PCB Design Guidelines to Minimize RF Transmissions

Posted on by

There are certain design guidelines for PCBs that don’t make a lot of sense, and practices that seem excessive and unnecessary. Often these are motivated by the black magic that is RF transmission. This is either an unfortunate and unintended consequence of electronic circuits, or a magical and useful feature of them, and a lot of design time goes into reducing or removing these effects or tuning them.

You’re wondering how important this is for your projects and whether you should worry about unintentional radiated emissions. On the Baddeley scale of importance:

  • Pffffft – You’re building a one-off project that

…read more

Continue reading PCB Design Guidelines to Minimize RF Transmissions→

Recapture Radio’s Roots with an Updated Regenerative Receiver

Posted on by

Crystal radios used to be the “gateway drug” into hobby electronics. Trouble was, there’s only so much one can hope to accomplish with a wire-wrapped oatmeal carton, a safety-pin, and a razor blade. Adding a few components and exploring the regenerative circuit can prove to be a little more engaging, and that’s where this simple breadboard regen radio comes in.

Sometimes it’s the simple concepts that can capture the imagination, and revisiting the classics is a great way to do it. Basically a reiteration of [Armstrong]’s original 1912 regenerative design, [VonAcht] uses silicon where glass was used, but the principle …read more

Continue reading Recapture Radio’s Roots with an Updated Regenerative Receiver→

Shmoocon 2017: Dig Out Your Old Brick Phone

Posted on by

The 90s were a wonderful time for portable communications devices. Cell phones had mass, real buttons, and thick batteries – everything you want in next year’s flagship phone. Unfortunately, Zach Morris’ phone hasn’t been able to find a tower for the last decade, but that doesn’t mean these phones are dead. This weekend at Shmoocon, [Brandon Creighton] brought these phones back to life. The Motorola DynaTAC lives again.

[Brandon] has a history of building ad-hoc cell phone networks. A few years ago, he was part of Ninja Tel, the group that set up their own cell phone network at DEF …read more

Continue reading Shmoocon 2017: Dig Out Your Old Brick Phone→

Shmoocon 2017: A Simple Tool For Reverse Engineering RF

Posted on by

Anyone can hack a radio, but that doesn’t mean it’s easy: there’s a lot of mechanics that go into formatting a signal before you can decode the ones and zeros.

At his Shmoocon talk, [Paul Clark] introduced a great new tool for RF Reverse Engineering. It’s called WaveConverter, and it is possibly the single most interesting tool we’ve seen in radio in a long time.

If you wanted to hack an RF system — read the data from a tire pressure monitor, a car’s key fob, a garage door opener, or a signal from a home security system’s sensor — …read more

Continue reading Shmoocon 2017: A Simple Tool For Reverse Engineering RF→

Shmoocon 2017: A Simple Tool For Reverse Engineering RF

Posted on by

Anyone can hack a radio, but that doesn’t mean it’s easy: there’s a lot of mechanics that go into formatting a signal before you can decode the ones and zeros.

At his Shmoocon talk, [Paul Clark] introduced a great new tool for RF Reverse Engineering. It’s called WaveConverter, and it is possibly the single most interesting tool we’ve seen in radio in a long time.

If you wanted to hack an RF system — read the data from a tire pressure monitor, a car’s key fob, a garage door opener, or a signal from a home security system’s sensor — …read more

Continue reading Shmoocon 2017: A Simple Tool For Reverse Engineering RF→

Shmoocon 2017: So You Want To Hack RF

Posted on by

Far too much stuff is wireless these days. Home security systems have dozens of radios for door and window sensors, thermostats aren’t just a wire to the furnace anymore, and we are annoyed when we can’t start our cars from across a parking lot. This is a golden era for anyone who wants to hack RF. This year at Shmoocon, [Marc Newlin] and [Matt Knight] of Bastille Networks gave an overview of how to get into hacking RF. These are guys who know a few things about hacking RF; [Marc] is responsible for MouseJack and KeySniffer, and [Matt] reverse engineered …read more

Continue reading Shmoocon 2017: So You Want To Hack RF→

Pumping Up An Antenna From A Stream Of Sea Water

Posted on by

Our Hackaday readership represent a huge breadth of engineering experience and knowledge, and we get a lot significant number of our story tips from you. For instance, today we are indebted to [sonofthunderboanerges] for delivering us a tip in the comment stream of one of our posts, detailing an antenna created by coupling RF into a jet of sea water created with a pump (YouTube link). It’s a few years old so we’re presenting it as an object of interest rather than as a news story, but it remains a no less fascinating project for that.

The antenna relies on …read more

Continue reading Pumping Up An Antenna From A Stream Of Sea Water→

Pumping Up An Antenna From A Stream Of Sea Water

Posted on by

Our Hackaday readership represent a huge breadth of engineering experience and knowledge, and we get a lot significant number of our story tips from you. For instance, today we are indebted to [sonofthunderboanerges] for delivering us a tip in the comment stream of one of our posts, detailing an antenna created by coupling RF into a jet of sea water created with a pump (YouTube link). It’s a few years old so we’re presenting it as an object of interest rather than as a news story, but it remains a no less fascinating project for that.

The antenna relies on …read more

Continue reading Pumping Up An Antenna From A Stream Of Sea Water→

Anatomy Of A Digital Broadcast Radio System

Posted on by

What does a Hackaday writer do when a couple of days after Christmas she’s having a beer or two with a long-term friend from her university days who’s made a career in the technical side of digital broadcasting? Pick his brains about the transmission scheme and write it all down of course, for behind the consumer’s shiny digital radio lies a wealth of interesting technology to try to squeeze the most from the available resources.

In the UK, our digital broadcast radio uses a system called DAB, for Digital Audio Broadcasting. There are a variety of standards used around the …read more

Continue reading Anatomy Of A Digital Broadcast Radio System→