Category Archives: sdr

Making Software Defined Radio Portable

Posted on by

While most smartphones can receive at least some radio, transmitting radio signals is an entirely different matter. But, if you have an Android phone and a few antennas (and a ham radio license) it turns out that it is possible to get a respectable software-defined radio on your handset.

[Adrian] set this up to be fully portable as well, so he is running both the transceiver and the Android phone from a rechargeable battery bank. The transceiver is also an interesting miniaturized version of the LimeSDR, the Lime SDR Mini, a crowdfunded Open Source radio platform intended for applications where …read more

Continue reading Making Software Defined Radio Portable→

ESP32 Makes for World’s Worst Radio Station

Posted on by

We can say one thing for [bitluni]: the BOMs for his projects, like this ESP32 AM radio transmitter, are always on the low side. That’s because he leverages software to do jobs traditionally accomplished with hardware, always with instructive results.

In this case, the job at hand is creating an RF oscillator in the broadcast AM band and modulating some audio onto it. From his previous experience using an ESP32 to watch video on an oscilloscope, [bitluni] knew that the microcontroller’s DACs were up to the task of producing an 800-kHz signal, and he managed to produce a more-or-less sine …read more

Continue reading ESP32 Makes for World’s Worst Radio Station→

An ADS-B Antenna Built From Actual Garbage

Posted on by

With the advent of low-cost software defined radio (SDR), anyone who’s interested can surf the airwaves from the FM band all the way up to the gigahertz frequencies used by geosynchronous satellites for about $20 USD. It’s difficult to overstate the impact this has had on the world of radio hacking. It used to be only the Wizened Ham Graybeards could command the airwaves from the front panels of their $1K+ radios, but now even those who identify as software hackers can get their foot in the door for a little more than the cost of a pizza.

But as …read more

Continue reading An ADS-B Antenna Built From Actual Garbage→

Shmoocon: Delightful Doppler Direction Finding With Software Defined Radio

Posted on by

When it comes to finding what direction a radio signal is coming from, the best and cheapest way to accomplish the task is usually a Yagi and getting dizzy. There are other methods, and at Shmoocon this last weekend, [Michael Ossmann] and [Schuyler St. Leger] demonstrated pseudo-doppler direction finding using cheap, off-the-shelf software defined radio hardware.

The hardware for this build is, of course, the HackRF, but this pseudo-doppler requires antenna switching. That means length-matched antennas, and switching antennas without interrupts or other CPU delays. This required an add-on board for the HackRF dubbed the Opera Cake. This board is …read more

Continue reading Shmoocon: Delightful Doppler Direction Finding With Software Defined Radio→

Spite, Thrift, and the Virtues of an Affordable Logic Analyzer

Posted on by

[Larry Wall], the father of Perl, lists the three great virtues of all programmers: Laziness, Impatience, and Hubris. After seeing that Saleae jacked up the prices on their popular logic analyzers to ludicrous levels, [CNLohr] added a fourth virtue: Spite. And since his tests with a Cypress FX3 over the last few days may lead to a dirt-cheap DIY logic analyzer, we may soon be able to add another virtue: Thrift.

The story begins a year or two ago when [CNLohr] got a Cypress FX3 development board for $45. The board sat unused for want of a Windows machine, but …read more

Continue reading Spite, Thrift, and the Virtues of an Affordable Logic Analyzer→

Art Eavesdrops on Life and Pagers

Posted on by

Before cell phones, pagers were the way to communicate on the go. At first, they were almost a status symbol. Eventually, they became the mark of someone who couldn’t or wouldn’t carry a cell phone. However, apparently, there are still some users that clutch their pagers with a death grip, including medical professionals. In an art project called HolyPager, [Brannon Dorsey] intercepted all the pager messages in a city and printed them on a few old-style roll printers. The results were a little surprising. You can check out the video below.

Almost all the pages were medical and many of …read more

Continue reading Art Eavesdrops on Life and Pagers→

Neural Network Learns SDR Ham Radio

Posted on by

Identifying ham radio signals used to be easy. Beeps were Morse code, voice was AM unless it sounded like Donald Duck in which case it was sideband. But there are dozens of modes in common use now including TV, digital data, digital voice, FM, and more coming on line every day. [Randaller] used CUDA to build a neural network that could interface with an RTL-SDR dongle and can classify the signals it hears. Since it is a neural network, it isn’t so much programmed to do it as it is trained. The proof of concept has training to distinguish FM, …read more

Continue reading Neural Network Learns SDR Ham Radio→

Tapping into a Ham Radio’s Potential with SDRPlay

Posted on by

Software-defined radios are great tools for the amateur radio operator, allowing visualization of large swaths of spectrum and letting hams quickly home in on faint signals with the click of a mouse. High-end ham radios often have this function built in, but by tapping into the RF stage of a transceiver with an SDR, even budget-conscious hams can enjoy high-end features.

With both a rugged and reliable Yaesu FT-450D and the versatile SDRPlay in his shack, UK ham [Dave (G7IYK)] looked for the best way to link the two devices. Using two separate antennas was possible but inelegant, and switching …read more

Continue reading Tapping into a Ham Radio’s Potential with SDRPlay→

Measuring HF Signal Speeds In A DIY Coaxial Collinear Antenna

Posted on by

Air Traffic Controllers use Automatic Dependent Surveillance-Broadcast (ADS-B) as an alternative to secondary radar to track aircraft. The ADS-B is transmitted by the aircraft and contains information such as GPS position, pressure, altitude, and callsign among other things at a 1090 MHz frequency, which can be decoded using any of a number of software tools.

[Mike Field] lives near an airport, and decided he wanted to peek into the tracking signals for fun. He turned to an RTL-based TV Dongle. Since the stock antenna was not cutting it, he decided to make one specifically for the 1090 MHz signal. His …read more

Continue reading Measuring HF Signal Speeds In A DIY Coaxial Collinear Antenna→

A TEMPEST in a Dongle

Posted on by

If a couple of generations of spy movies have taught us anything, it’s that secret agents get the best toys. And although it may not be as cool as a radar-equipped Aston Martin or a wire-flying rig for impossible vault heists, this DIY TEMPEST system lets you snoop on computers using secondary RF emissions.

If the term TEMPEST sounds familiar, it’s because we’ve covered it before. [Elliot Williams] gave an introduction to the many modalities that fall under the TEMPEST umbrella, the US National Security Agency’s catch-all codename for bridging air gaps by monitoring the unintended RF, light, or even …read more

Continue reading A TEMPEST in a Dongle→