Category Archives: rgb

Driver Board Makes Nixie Projects Easier than Ever

Posted on by

We know, we know — yet another Nixie clock. But really, this one has a neat trick: an easy to use, feature packed driver for Nixies that makes good-looking projects a snap.

As cool as Nixies are — we’ll admit that to a certain degree, familiarity breeds contempt — they can be tricky to integrate. [dekuNukem] notes that aside from the high voltages, laying hands on vintage driver chips like the 7441 can be challenging and expensive. The problem was solved with about $3 worth of parts, including an STM32 microcontroller and some high-voltage transistors. The PCBs come in two …read more

Continue reading Driver Board Makes Nixie Projects Easier than Ever→

A Minimalist Weather Clock with a Unique Display

Posted on by

If you’re looking for a home hub to display weather, time, and important family information, the formula is pretty simple: build yet another “magic mirror” project. We’re not complaining — magic mirrors look great. But if all you need is time and weather, this elegant pixel display is something just a little bit different.

Among his many criteria for the perfect hack, [Dominic] lists usefulness, visual appeal, and low cost. We’ll agree that his minimalist weather clock hits all those marks, and with the careful selection of a 16 x 32-pixel RGB display module, [Dominic] ended up giving back to …read more

Continue reading A Minimalist Weather Clock with a Unique Display→

A Lightsaber, With Rave Mode

Posted on by

How often after being exposed to Star Wars did you dream of having your own working lightsaber? These days — well, we don’t quite have the technology to build crystal-based weapons, but tailor-made lightsabers like redditor [interweber]’s are very much real.

Piggybacking off the Korbanth Graflex 2.0 kit — a sort of bare-bones lightsaber ready to personalize — [interweber] is using a Teensy 3.5 to handle things under the hilt. Instead of taking the easy route and cramming everything into said handle, a 3D printed a cradle for the electronics and speaker keep things secure. The blade is made up …read more

Continue reading A Lightsaber, With Rave Mode→

1.5 Million Dollars Buys 850,000 LEDs and 29 Raspberry Pis

Posted on by

You think you like RGB LEDs? Columbus, OH art professor [Matthew Mohr] has more blinkenlove than you! His airport-scale installation piece is an incredible 850,000 RGB LEDs wrapped around a 14-foot tall face-shaped sculpture that projection-maps participants’ faces onto the display. To capture images, there is also a purpose-built room with even illumination and a slew of Raspberry Pi cameras to take pictures of the person’s face from many angles simultaneously.

Besides looking pretty snazzy, the scale of this is just crazy. For instance, if you figure that the usual strip of 60 WS2812s can draw just about 9.6 watts …read more

Continue reading 1.5 Million Dollars Buys 850,000 LEDs and 29 Raspberry Pis→

1.5 Million Dollars Buys 850,000 LEDs and 29 Raspberry Pis

Posted on by

You think you like RGB LEDs? Columbus, OH art professor [Matthew Mohr] has more blinkenlove than you! His airport-scale installation piece is an incredible 850,000 RGB LEDs wrapped around a 14-foot tall face-shaped sculpture that projection-maps participants’ faces onto the display. To capture images, there is also a purpose-built room with even illumination and a slew of Raspberry Pi cameras to take pictures of the person’s face from many angles simultaneously.

Besides looking pretty snazzy, the scale of this is just crazy. For instance, if you figure that the usual strip of 60 WS2812s can draw just about 9.6 watts …read more

Continue reading 1.5 Million Dollars Buys 850,000 LEDs and 29 Raspberry Pis→

Color Sensor from an RGB LED and a Photocell

Posted on by

When you need to quantify the color of an object, you’ve got quite a few options. You can throw a Raspberry Pi camera and OpenCV at the problem and approach it through software, or you can buy an off-the-shelf RGB sensor and wire it up to an Arduino. Or you can go back to basics and build this reflective RGB sensor from an LED and a photocell.

The principle behind [TechMartian]’s approach is simplicity itself: shine different colored lights on an object and measure how much light it reflects. If you know the red, green, and blue components of the …read more

Continue reading Color Sensor from an RGB LED and a Photocell→

Boredom + Lasers = Projector!

Posted on by

[Krazer], a post-doctoral researcher at MIT, loves him some lasers. When out of boredom one afternoon he hatched an idea for a laser projector, it grew until a few years later he wound up with this RGB laser for a projector — Mark IV no less.

In addition to 3D-printing the parts, the major innovation with this version is the ability to re-align the lasers as needed; tweaking the vertical alignment is controlled by a screw on the laser mounts while the horizontal alignment is done the same way on the mirror mounts. This simplifies the design and reduces the …read more

Continue reading Boredom + Lasers = Projector!→

Rushing the Design and Construction of LED Centerpieces

Posted on by

Sometimes the most important thing is getting something done.

[Alex Lao] was recently in such a situation. His sister was getting married and he designed, built, and delivered twenty RGB LED table centerpieces in a rush. There were no prototypes made, and when the parts arrived all twenty were built all at once over a single weekend. These table centerpieces are illuminated by RGB LEDs and battery-powered, but have an option to be powered by a wall adapter.

[Alex] helpfully shared some tips on reducing the production risks and helping ensure results in such a limited time frame. His advice …read more

Continue reading Rushing the Design and Construction of LED Centerpieces→

A Hypnotizing Interactive Art Piece for Visualizing Color Theory

Posted on by

Digital color theory can be a tricky concept to wrap one’s mind around – particularly if you don’t have experience with digital art. The RGB color model is about as straightforward as digital color mixing gets: you simply set the intensity of red, green, and blue individually. The result is the mixing of the three colors, based on their individual intensity and the combined wavelength of all three. However, this still isn’t nearly as intuitive as mixing paint together like you did in elementary school.

To make RGB color theory more tangible, [Tore Knudsen] set out to build a system …read more

Continue reading A Hypnotizing Interactive Art Piece for Visualizing Color Theory→

North Korean hackers came close to hacking Hillary Clinton’s presidential campaign

Posted on by

As part of a cyber-espionage operation against Hillary Clinton’s 2016 presidential campaign, North Korean hackers compromised email accounts belonging to individuals involved with an East Asia-focused foreign policy advisory group, multiple people familiar with the incident told CyberScoop.  The North Koreans sought to acquire policy documents and other relevant information that may have affected the regime if Clinton were to become president, the sources said. The advisory group’s job was to craft such policies. The hackers were able to break into the email accounts of employees of at least one prominent D.C.-based think tank; some of which were involved with the East Asia foreign policy advisory group. These individuals occasionally communicated with staff of the Democratic candidate’s official Hillary for America (HFA) campaign, based on an incident response report obtained by CyberScoop and authored by security experts who worked for the presidential campaign. The attackers used their access to apparently draft convincing […]

The post North Korean hackers came close to hacking Hillary Clinton’s presidential campaign appeared first on Cyberscoop.

Continue reading North Korean hackers came close to hacking Hillary Clinton’s presidential campaign→