Author Archives: Joshua Vasquez

Laser Cutter Resurrection Uncovers a Magnificent Machine Beneath the Ash

Posted on by

Trash is relative. When my coworker accidentally lit an ABS-barbecue inside the company laser cutter, he made trash. The wreckage was headed for the dump, but I managed to save it and pass it on to my friend [Amy]. Four months later, she phoenixed it back to life from the trash-it-was to a glorious new system more powerful than the original. This is her story, carefully told in detail in a three-part series (part one, part two, part three) that takes us on a journey from trash to triumph. She even recorded video of the entire process (also embedded below) …read more

Continue reading Laser Cutter Resurrection Uncovers a Magnificent Machine Beneath the Ash→

Getting Kitted to Teach your First Hardware Workshop

Posted on by

I was always a sucker for art classes in my early days. There was something special about getting personal instruction while having those raw materials in your hands at the same time. Maybe it was the patient voice of the teacher or the taste of the crayons that finally got to my head. Either way, I started thinking: “I want to do this; I want to teach this stuff.”

Last year at Hackaday Superconference I got my chance. Hardware workshops with real hardware were so rare; I just had to bring one to the table! What follows is my tale …read more

Continue reading Getting Kitted to Teach your First Hardware Workshop→

Classy CoreXY Build Breaks Down the Design Pinchpoints

Posted on by

Ever since [Ilan Moyer] published the design, CoreXYs have been exploding in the homebrew 3D Printer community. Nevertheless, not all designs are created equal, and a solid design means adhering to some unspoken constraints. Fear not, though. [Mark Rehorst’s] blog post pulls the lid off these constraints and puts them up-front-and-center.  For anyone looking to succeed with their own CoreXY build, this thoughtful critique will keep us away from stray design paths.

[Mark’s] blogpost centers around the xy-stage of his UMMD printer. Here, he walks through the constraints of where belts should be located to guarantee dimensional accuracy of parts. …read more

Continue reading Classy CoreXY Build Breaks Down the Design Pinchpoints→

Hanky-Deprived Drones Taste Whale Snot for Science

Posted on by

A whole world of biomass floats in the boogers of a whale’s exhaust, and it’s a biologist’s dream to explore it. Whale snot carries everything from DNA samples to hormone signatures. But getting close enough to a surfacing whale for long enough to actually sample this snot turns out to be a nightmare when done by boat. Researcher [Iain Kerr] and a team from Olin College of Engineering thought, why not use a drone instead? Behold, the Snotbot was born!

Snotbot is essentially a petri-dish-equipped commercial drone that users can pilot into the exhaust of a whale to collect samples …read more

Continue reading Hanky-Deprived Drones Taste Whale Snot for Science→

Tattoo your 3D Prints with Velocity Painting

Posted on by

Just when it seems like we’ve juiced all the creative potential out of our 3D printers, a bold new feature lands on the table. Enter Velocity Painting, a concept brought to life by [Mark Wheadon] that textures our 3D prints with greyscale images.

At its core, the technique is straightforward: skin an image onto a 3D print by varying the print speed in specific locations and, thereby, varying just how much plastic oozes out of the nozzle. While the concept seems simple, the result is stunning.

Velocity Painting opens up new ways of expression on top of an existing print …read more

Continue reading Tattoo your 3D Prints with Velocity Painting→

Spraychalk Anoints your Sidewalks with Precision Sandprints

Posted on by

Giant lines in the sand are incredibly useful for pleasing the gods and hailing overpassing extraterrestrials. Beautiful, unwarranted spray-painted sidewalks might land you in detention with local law enforcement. Of course, why not have both? With the Sand-and-Spraychalk machine, you can!

The Sand-and-Spraychalk machine Is a moving two-axis CNC machine that can anoint its path with a spray of either sand bits or spray paint.  As with any self-respecting power tool these days, the Spraychalk is driven by a rechargeable Bosch 18 V battery pack. As far as safety goes, leveraging an already-product-proven solution instead of cooking our lawns with …read more

Continue reading Spraychalk Anoints your Sidewalks with Precision Sandprints→

Tie-Dyed Filament Sings With Color

Posted on by

Manufacturers dye all sorts of 3D printer filaments on their factory lines; why can’t we? [Richard] takes this idea one step further by creating his own custom multicolored reels of nylon. Printing with these reels produces a vibrant pattern that simply demands our attention and  begs us to ask: how on earth..?

[Richard’s] tie-dye adventure is cleanly documented on the blog.  He simply spools a reel of nylon together and dyes subsections of the spool with a different color. With the filament “paletted” to taste, parts pop of the printer with an eye-catching rib pattern of color.

It’s worth mentioning …read more

Continue reading Tie-Dyed Filament Sings With Color→

Budget Dehydrator Gives your Damp Filament a Second Chance

Posted on by

If you’ve had the misfortune of leaving your 3D printer filament out on a muggy day or, heaven forbid: showering with it, it’s probably soaked up quite a bit of moisture. Moisture will do more than just make your printer sound like Rice Crispies, it’ll ruin surface finishes and cause the filament to string into thin wisps between separate geometries on the same layer. Luckily for us, though, both [SafetyGlassesRequired] and [Joe Mike Terranella] give us the breakdown on taking a pair of snippers and about $40 in cash to start drying out our filament far away from the possibility …read more

Continue reading Budget Dehydrator Gives your Damp Filament a Second Chance→

Prestreched Fabric Prints Pop into the Third Dimension

Posted on by

Printing on fabric might be a familiar trick, but adding stretch into the equation gives our fabric prints the ability to reconstitute themselves back into 3D. That’s exactly what [Gabe] has accomplished; he’s developed a script that takes open 3d meshes and converts them to a hexagonal pattern that, when 3D-printed on a stretched fabric, lets them pop into 3D upon relaxing the fabric.

[Gabe’s] algorithm first runs an open 3D surface through the “Boundary-First Flattening Algorithm,” which gives [Gabe] a 2D mesh of triangles. Triangles are then mapped to hexagons based on size, which produces a landscape of 2D …read more

Continue reading Prestreched Fabric Prints Pop into the Third Dimension→

Digikey Tips Its Hat To Kicad With Its Own Library

Posted on by

Digikey might wow us with their expansive stock, but they generally don’t wow us with personal gestures, until now. The US-based electronics vendor is nodding its head in approval to KiCad users with its very own parts library. What’s more, [Chris Gammell] walks us through the main features and thought process behind its inception.

With all the work that’s going into this library, it’s nice to see features showing that Digikey took a thorough look at KiCad and how it fits into the current state of open-source PCBA design. First off, this library follows a slightly different design pattern from …read more

Continue reading Digikey Tips Its Hat To Kicad With Its Own Library→