Author Archives: John Baichtal

Make a Tesla Coil Winding Rig with K’Nex

Posted on by

Instructables user [birdycrazy] built a winding rig from a PVC pipe and a bunch of K’Nex. He had recently started a Tesla coil project and needed an efficient way to wind the secondary coil. All of the designs for DIY winding rigs he found on the Internet required parts he didn’t have or simply cost a bunch of money. Then he realized he’d been building with K’nex a lot, and why not build a tool to help him?

He ended up investing only his K’nex elements and a length of 4” PVC pipe for the project. He used a K’nex …read more

Continue reading Make a Tesla Coil Winding Rig with K’Nex→

Maintain Temperature with a DIY Laboratory Dry Bath

Posted on by

[abizar] lucked into some aluminum blocks, one of which had test-tube-sized holes in it–just the thing to turn into a dry bath for his biology projects.

He stuck a 100W positive temperature coefficient heater into the bottom of the block using silicone glue, and the heater heated the block up in around half an hour. He connected a temperature controller to maintain the temperature at an ambient 95C, with a controller monitoring a thermistor to keep the block within the pre-determined range. The heater has an auto shutoff if it got too hot, so [abizar] felt safe keeping the dry …read more

Continue reading Maintain Temperature with a DIY Laboratory Dry Bath→

Electric LEGO Longboard Now Complete with Epic Road Test

Posted on by

We recently posted about [James Bruton]’s most excellent oversized LEGO electric longboard. Well, now he has completed the project by tidying a few things and building oversized versions of classic light-up bricks to serve as headlamps and the tail light. Most importantly, he’s hitting the road with it!

He built a LEGO-looking enclosure for the battery as well, based on a 2×6 brick. The battery pack sits behind the motor with the tail light on top and holds the radio control receiver as well the twin LiPos. The head and tail lights pack 24-LED discs and are controlled by [James]’ …read more

Continue reading Electric LEGO Longboard Now Complete with Epic Road Test→

Simple 3D-Printed Circuitry

Posted on by

One of the problems encountered thus far with 3D-printing circuits with conductive filament is that it doesn’t really bond to anything, let alone solder, so how does one use it?

[mikey77] wrote an Instructable showing how to print circuit boards and create simple circuits, using shape of the plastic as a way to control the circuit. We like how he used using the flexible nature of the filament to make buttons, with two layers of conductive material coming together with the press of a finger.

He also created a linear potentiometer with a 3D-printed wiper that increases the ohms of …read more

Continue reading Simple 3D-Printed Circuitry→

OpenCV Turret Tracks Motion, Busts Airsoft Pellets

Posted on by

In the eternal struggle for office dominance, the motion-tracking Airsoft/Nerf/whatever, the autonomous turret seems to be the nuclear option. [Aaron] and [Davis] built a motion-tracking turret that uses openCV to detect movement, before hitting a relay to trigger the gun.

There’s a Raspberry Pi controlling a Logitech C210 Pi-compatible webcam, with a stepper hat for the Pi controlling two NEMA steppers that aim the gun. The design is simple but elegant, with a rotating base and an assembly that raises and lowers the weapon.

The openCV intrigues us. We want to see a openCV-powered turret with color detection, so your …read more

Continue reading OpenCV Turret Tracks Motion, Busts Airsoft Pellets→

Hackaday Prize Entry: Pi-Driven Google Glass

Posted on by

[Ricardo Ferro] didn’t want to buy a Google Glass, so he made his own.

The Raspberry Pi Zero Prism consists of a 3D-printed headset the side-pieces of which hold a variety of electronic components, including a Pi Zero running Raspbian Jessie, a Pi Noir IR camera, a WiFi/Bluetooth module and a whole mess of SMD tactile push buttons. Video output is provided by a Kopin 922K display module. This module is usually used in smart goggles and uses a prism to reflect information into the wearer’s field of view.

One application [Ricardo] envisions for this Open Source Google Glass is …read more

Continue reading Hackaday Prize Entry: Pi-Driven Google Glass→

Mini Hacker Breaks Down How To Build It

Posted on by

I read the other day that the hot career choice for kids these days is: YouTuber. That means every kid — yes, including mine — has two or three attempts at a YouTube show on their account and then they get into the next big thing and forget about it. On the other hand, sometimes you find someone who has a lot of ideas to share, and the dedication to keep sharing them.

[Kevin Zhou], an 11-year-old from Indonesia, has filmed around  70 videos in the past couple of years, with a fantastic variety of nerdy projects ranging from Mindstorms …read more

Continue reading Mini Hacker Breaks Down How To Build It→

Motorized Turntable Created from TV Stand

Posted on by

[Robin Reiter] had a powered TV stand that only rotates around 20°, because who really needs their TV to rotate fully? He wanted to turn it into a motorized turntable for shooting videos, but first he had to hack it.

After opening it up [Robin] discovered that there was a surprising amount of electronics in the base. In addition to a DC motor, there was a potentiometer attached to a gear to give feedback, but it was set up for partial rotation so it had to be yanked out.

There was also a plastic gear with teeth around just part …read more

Continue reading Motorized Turntable Created from TV Stand→

Mini Tetris Game Packs a Tiny85

Posted on by

[dombeef] originally built pocketTETRIS as a Father’s Day gift for his Tetris-loving pops. However, having finished the project he’s decided to share it with the universe, and it’s looking rather sweet.

He made the game the smallest he could make, with size limitations imposed by a 0.96” OLED display, the coin-cell battery pack, and his desire for a durable 3D-printed case. It uses a ATtiny85 for the brains, mounted on a custom PCB that [dombeef] designed in KiCad. The Arduino code was modified from Andy Jackson’s ATtinyArcade code, giving it three-button capability instead of two. [dombeef] has details on the …read more

Continue reading Mini Tetris Game Packs a Tiny85→