Author Archives: John Baichtal

Open Source Barbot Needs Only Two Motors

Posted on by

Most drinkbots are complicated—some intentionally so, others seemingly by design necessity. If you have a bunch of bottles of booze you still need a way to get it out of the bottles in a controlled fashion, usually through motorized pouring or pumping. Sometimes all thoe tubes and motors and wires looks really cool and sci fi. Still, there’s nothing wrong with a really clean design.

[Lukas Šidlauskas’s] Open Source Barbot project uses only two motors to actuate nine bottles using only a NEMA-17 stepper to move the tray down along the length of the console and a high-torque servo to …read more

Continue reading Open Source Barbot Needs Only Two Motors→

Hackaday Prize Entry: ESPMetric, a Simple and Easy Matrix

Posted on by

There’s a lot you can do with a bunch of LEDs connected to the Internet. You can display the time, the weather, the bus schedule, or any one of a number of important data points in your life. Custom matrices are a pain in the butt to set up, which is why we like to see one looking rather polished and clean. [Faire-soi-meme] prettied up an 8×32 NeoPixel matrix with some diffusers and a grid bezel. It’s the ESPMetric, and it’s also an entry for this year’s Hackaday Prize.

The NeoPixel matrix is controlled by a NodeMcu using elements from …read more

Continue reading Hackaday Prize Entry: ESPMetric, a Simple and Easy Matrix→

Toy Dash Turned Gaming Interface

Posted on by

We see a lot of MAME cabinets and other gaming emulator projects here on Hackaday, but it’s not often that we see one the form factor of which so elegantly matches the ROM. [circuitbeard] converted a Tomy Turnin Turbo toy dashboard into a mini arcade machine playing Outrun.

There are many fascinating details in [circuitbeard]’s writeup. His philsophy is to “keep it looking stock” so he went to great lengths to add functionality to various elements of the toy without changing its appearance. The gear shifter was turned into a 3-way momentary switch with high and low speeds at top …read more

Continue reading Toy Dash Turned Gaming Interface→

Determining Kibble Level Via Time-of-Flight

Posted on by

[WTH] is building an IoT kitty food dispenser. There are a few of these projects floating around that measure out portions very sensibly — some use screws to dispense a set amount of food at a time, some measure the weight of the remaining stockpile. This build is definitely not that. This kitty food monitor uses a time of flight sensor to determine the remaining level of food in a hopper. [WTH]’s feeder lets the cat eat all the grub it wants, then alerts the hooman when kibble levels drop below a certain level.

The project starts with one of …read more

Continue reading Determining Kibble Level Via Time-of-Flight→

Hackaday Prize Entry: Fochica Alerts You

Posted on by

It seems like no one should need to be reminded about the importance of not leaving children in cars, but it still happens. The Fochica project is a Hackaday Prize entry that equips the family minivan with car seat monitors—the name comes from FOrgotten CHild in Car Alert.

It’s an Open Source project consisting of a Bluetooth LE-equipped Arduino that monitors whether the seat is empty or occupied. Paired with a phone app, Fochica monitors pressure sensors and the seat belt’s reed switch to determine whether there’s a kid there. The user’s app checks whether he …read more

Continue reading Hackaday Prize Entry: Fochica Alerts You→

Cluephone for Partiers

Posted on by

[Sam Horne] adapted an old school landline phone to deliver clues to birthday party guests. When guests find a numerical clue, they type it into the keypad to hear  the next clue, which involves decoding some Morse code.

The phone consists of an Arduino Pro Mini, a MP3/WAV trigger, and the phone itself, of which the earpiece and keypad have been reused. [Sam] had to map out the keypad and solder leads connecting the various contact points of the phone’s PCB to the Arduino’s digital pins. He used a digitally-generated voice to generate the audio files, and employed the Keypad …read more

Continue reading Cluephone for Partiers→

USB + μC = Peril?

Posted on by

You hear about people finding USB drives and popping them into a computer to see what’s on them, only to end up loading some sort of malware onto their computer. It got me to thinking, given this notorious vulnerability, is it really a great idea to make electronics projects that plug into a computer’s USB port? Should I really contribute to the capitulation-by-ubiquity that USB has become?

A of couple years ago I was working on an innocuous project, a LED status light running off of USB. It ran off USB because I had more complicated hopes for it–some vague …read more

Continue reading USB + μC = Peril?→

Quintuple-Sized LEGO Go-Kart

Posted on by

[Matt Denton] was inspired by [James Bruton]’s scaled up LEGO and decided to create his own giant LEGO project. He found a classic model that he wanted to scale up.  1985’s Technic Go-Kart (set #1972) contained 98 pieces and seemed manageable.

He wanted to create something his 8yo nephew [Ruben] could sit in, but had to rule out a fully kid-sized go-kart. It had also to be (at least somewhat) economical with regards to plastic and printing time. [Matt] settled on sizing the largest piece—the 2×8 plate—to fit diagonally on the 11”x11” bed of his Lulzbot Taz5.

It took 168 …read more

Continue reading Quintuple-Sized LEGO Go-Kart→

Mini Oscar Mayer Wienermobile Takes Moxie in KC

Posted on by

There are no shortage of fantastic and creative Power Racing Series cars, but here’s an especially fun example. [Pete Prodoehl] of Milwaukee Makerspace and his teammates [Kathy Cannistra] and [Kyle White] built a Power Racing car based on the design of the iconic Oscar Mayer Wienermobile.

They created the wienie and bun out of fiberglass and foam. Meanwhile, with the KC Maker Faire approaching, the team scrambled to finish the project, with [Kyle] working on assembly while [Pete] tackled the electronics. [Kyle] also proved to be the best wiener rider, with everyone else getting thrown off.

It should be noted …read more

Continue reading Mini Oscar Mayer Wienermobile Takes Moxie in KC→

Hackaday Prize Entry: Bloodhound Autonomous Radiolocation Drone

Posted on by

If you’re a first responder — say, searching for someone lost in the outback, or underneath an avalanche — and you’re looking for someone with a radio beacon, what’s the fastest way to find that beacon? Getting up high would be a good idea, and if you’re using radio direction finding, you’ll want to be able to cover a lot of ground quickly if only to make the triangulation a bit easier. High and fast — sounds like the perfect opportunity for a drone, right?

[Phil Handley]’s Bloodhound project is an autonomous drone that can scan a wide area, listening …read more

Continue reading Hackaday Prize Entry: Bloodhound Autonomous Radiolocation Drone→