Author Archives: Jack Laidlaw

Dead Bug Soldered LED Ring of Awesome

Posted on by

Sometimes the simplest things in life are the most beautiful. [The Tweaker] has soldered an LED circle on the top of an ATmega328P chip, and it looks great.

Using nothing more than some solder, wire, 20 x Pico 0402 (1mm x 0.5mm) blue LEDs and an ATmega328P (7mm x 7mm), [The Tweaker] managed to cram 20 LEDs into a circle on the top of the chip soldered in dead bug style. The chip is running some Arduino code and is operating on the 8 MHz internal crystal oscillator, so that manages to keep the part count low. The soldering is …read more

Continue reading Dead Bug Soldered LED Ring of Awesome→

False Claims On Kickstarter: What’s New?

Posted on by

Kickstarter and its ilk seem like the Wild West when it comes to claims of being “The world’s most (Insert feature here) device!” It does add something special when you can truly say you have the world record for a device though, and [MellBell Electronics] are currently running a Kickstarter claiming the worlds smallest Arduino compatible board called Pico.

We don’t want to knock them too much, they seem like a legit Kickstarter campaign who have at time of writing doubled their goal, but after watching their promo video, checking out their Kickstarter, and around a couple of minutes research, …read more

Continue reading False Claims On Kickstarter: What’s New?→

Give Your Bench Power Supply A Helping Hand

Posted on by

[Sverd Industries] have created a pretty cool bench power supply integrating soldering helping hands into the build. This helps free up some much-needed bench space along with adding that wow factor and having something that looks quite unique.

The build is made from a custom 3D printed enclosure (Thingiverse files here), however if you have no access to a 3D printer  you could always just re-purpose or roll your own instrument enclosure. Once the enclosure is taken care of, they go on to install the electronics. These are pretty basic, using a laptop PSU with its output attached to the …read more

Continue reading Give Your Bench Power Supply A Helping Hand→

3D Printed Gearbox Lifts An Anvil With Ease

Posted on by

How strong can you make a 3D-printed gearbox. Would you believe strong enough to lift an anvil? [Gear Down For What?] likes testing the limits of 3D printed gearboxes. Honestly, we’re amazed.

3D printing has revolutionized DIY fabrication. But one problem normally associated with 3D printed parts is they can be quite weak unless designed and printed carefully.

Using a whole roll of filament, minus a few grams, [Gear Down For What?] printed out a big planetary gear box with a ratio of 160:1 and added some ball bearings and using a drill as a crank. Setting it up on …read more

Continue reading 3D Printed Gearbox Lifts An Anvil With Ease→

Make Your Own Reed Switches

Posted on by

[Lucid Science] shows us how to make some simple reed switches. Reed switches are simple components that detect a magnetic field and can close or open a circuit once detected. While not really a thing of beauty, these DIY reed switches should help you out if you just can’t wait to order some or you fancied trying your hands at making some components from scratch.

Reed switches normally come in very small form factors so if you need something small then this may not be for you however the video does show you on a macro scale the fundamental workings …read more

Continue reading Make Your Own Reed Switches→

Best Product Entry: Open Source Internet of Dosimeter

Posted on by

[Radu Motisan] Has entered a cool project into the Best Product portion of this year’s Hackaday Prize. It’s called an Open Source IoT Dosimeter. It has a Geiger tube for detecting radiation levels along with Internet connectivity and a host of other goodies.

Dubbed the KIT1, this IoT dosimeter can be used as a portable radiation detector with its Nokia 5110 LCD as an output or a monitoring station with Ethernet. With its inbuilt speaker, it alerts users to areas with excessive radiation. KIT1 is a fully functioning system with no need for a computer to get readouts, making it …read more

Continue reading Best Product Entry: Open Source Internet of Dosimeter→

Using A Thermal Camera To Spot A Broken Wrist

Posted on by

Chemist and Biochemist [Thunderf00t] has shown us a really interesting video in which you can spot the wrist he broke 10 years ago using a thermal camera.

He was on an exercise bike while filming himself on a high-resolution thermal camera, As his body started to heat up he noticed that one hand was not dumping as much heat as the other. In fact one was dumping very little heat. Being a man of science he knew there must be some explanation for this. He eventually came to the conclusion that during a nasty wrist breaking incident about 10 years …read more

Continue reading Using A Thermal Camera To Spot A Broken Wrist→

New Ransomware Crippling Chernobyl Sensors

Posted on by

[The BBC] reports Companies all over the world are reporting a new ransomware variant of WannaCry. this time it has taken out sensors monitoring the Chernobyl nuclear disaster site.

We have all heard of the growing problem of ransomware and how Windows XP systems seem especially susceptible to WannaCry and it’s variants which were originally zero day vulnerabilities stored up by the NSA then leaked by WikiLeaks. Microsoft did release a patch. It’s been everywhere in the media but it still seems that some people didn’t get the memo.

Ukrainian state power plants and Kiev’s main airport, among others, have …read more

Continue reading New Ransomware Crippling Chernobyl Sensors→

Hackaday Prize Entry: A Go-Kart For a Special Child

Posted on by

ScottCar is a go-kart for a special Kid and is [Alain]’s entry in this years Hackaday Prize. Will it race to victory?

The concept behind ScottCar is simple: There isn’t much out there for disabled kids when it comes to go-karts. [Alain Mauer] has an autistic son who isn’t quite capable of driving a Go-Kart as he would have trouble using pedals and brakes. He didn’t let that stand in his way, so he built a go-kart for his 11-year-old son. It incorporates an automatic braking system. In situations where the kart speeds up going down, brakes are automatically applied, …read more

Continue reading Hackaday Prize Entry: A Go-Kart For a Special Child→

Design a Coil for a Specific Inductance

Posted on by

YouTuber [RimstarOrg] shows how to make a DIY inductor for a specific inductance. This is obviously a great skill to learn as sometimes your design may call for a very accurate inductance that may be hard to find otherwise.

It may seem daunting when it comes to making your own inductor you may have a few questions such as: What type of core will I use?, How many turns does my coil need? or How do I calculate these parameters to create the specific inductance I desire? [RimstarOrg] goes through all of This, he even has a handy Inductance calculator  …read more

Continue reading Design a Coil for a Specific Inductance→