Author Archives: Elliot Williams

Beautiful DIY Spot Welder Reminds Us We Love 3D Printing

Posted on by

[Jim Conner]’s DIY tab spot welder is the sweetest spot welder we’ve ever seen. And we’re not ashamed to admit that we’ve said that before.

The essence of a spot welder is nothing more than a microwave oven transformer rewound to produce low voltage and high current instead of vice-versa. Some people control the pulse-length during the weld with nothing more than their bare hands, while others feel that it’s better implemented with a 555 timer circuit. [Jim]’s version uses a NodeMCU board, which is desperately overkill, but it was on his desk at the time. His comments in GitHub …read more

Continue reading Beautiful DIY Spot Welder Reminds Us We Love 3D Printing→

Completely Owning the Dreamcast Add-on You Never Had

Posted on by

If you’ve got a SEGA Dreamcast kicking around in a closet somewhere, and you still have the underutilized add-on Visual Memory Unit (VMU), you’re in for a treat today. If not, but you enjoy incredibly detailed hacks into the depths of slightly aged silicon, you’ll be even more excited. Because [Dmitry Grinberg] has a VMU hack that will awe you with its completeness. With all the bits in place, the hacking tally is a new MAME emulator, an IDA plugin, a never-before ROM dump, and an emulator for an ARM chip that doesn’t exist, running Flappy Bird. All in a …read more

Continue reading Completely Owning the Dreamcast Add-on You Never Had→

STM32CubeMX Makes Makefiles

Posted on by

When hardware manufacturers make GUI code-generation tools, the resulting files often look like a canned-spaghetti truck overturned on the highway — there’s metaphorical overcooked noodles and red sauce all over the place. Sometimes we think they’re doing this willfully to tie you into their IDE. Not so the newest version of ST’s graphical STM32CubeMX, which guides you through a pleasant pin-allocation procedure and then dumps out, as of the latest version, a clean Makefile.

Yes, that’s right. This is a manufacturer software suite that outputs something you can actually use with whatever editor, GUI, compiler, or environment that you wish …read more

Continue reading STM32CubeMX Makes Makefiles→

A Bright Idea for Reflow Soldering

Posted on by

There are almost as many ways to reflow a surface-mount circuit board as there are hackers. Today, we add another method to the list. [Dasaki] converted a halogen floodlight into an SMT oven, and did so with all the bells and whistles. Check the video below the break.

We’ve actually seen the low-tech version of this hack before, but it’s nothing we would want to use on a daily basis. [Dasaki] needed to get 100 boards done, so it was worth the effort to get it right.

The floodlight was a natural choice — it’s got its own built-in chamber, …read more

Continue reading A Bright Idea for Reflow Soldering→

Dropping Zip Bombs on Vulnerability Scanners

Posted on by

If you’ve ever looked at the server logs of a computer that lives full-time on the Internet, you know it’s a rough world out there. You’ll see hundreds of attempts per day to break in to your one random little box. Are you going to take that sitting down? Christian Haschek didn’t.

Instead of simply banning IPs or closing off services, [Christian] decided to hit ’em where it hurts: in the RAM. Now, whenever a bot hits his server looking for a poorly configured WordPress install, he serves them 10 GB of zeroes, compressed down into 10 MB by gzip …read more

Continue reading Dropping Zip Bombs on Vulnerability Scanners→

Tetris on a Soldering Iron

Posted on by

Our commenteers have all said good things about the open-source TS100 soldering iron pencil: things like “it solders well”. But we’ve all got soldering irons that solder well. What possible extra value does having open-source firmware on a soldering iron bring? [Joric] answered that question for us — it can play Tetris. (Video embedded below.)

While that’s cool and all, it wasn’t until we were reading through the README over at GitHub that the funniest part of this hack hit us. Every time you lose a game, the iron tip temperature increases by 10 degrees. Tetris for masochists? The makings …read more

Continue reading Tetris on a Soldering Iron→

Free as in Beer, or the Story of Windows Viruses

Posted on by

Whenever there’s a new Windows virus out there wreaking global havoc, the Linux types get smug. “That’ll never happen in our open operating system,” they say. “There are many eyes looking over the source code.” But then there’s a Heartbleed vulnerability that keeps them humble for a little while. Anyway, at least patches are propagated faster in the Linux world, right?

While the Linuxers are holier-than-thou, the Windows folks get defensive. They say that the problem isn’t with Windows, it’s just that it’s the number one target because it’s the most popular OS. Wrong, that’d be Android for the last …read more

Continue reading Free as in Beer, or the Story of Windows Viruses→

[Daito Manabe] Interview: Shocking!

Posted on by

We’ve loved [Daito Manabe]’s work for a while now. Don’t know [Daito]? Read this recent interview with him and catch up. Is he a hacker’s artist, or an artist’s hacker?

My personal favorite hack of his is laser painting apparatus from 2011. The gimmick is that he uses the way the phosphors fade out to create a greyscale image. Saying that is one thing, but watching it all come together in time is just beautiful.

Maybe you’ve seen his facial-electrocution sequencer (words we never thought we’d write! YouTube link). He’s taken that concept and pushed it to the limit — …read more

Continue reading [Daito Manabe] Interview: Shocking!→

Hacking an Inspection Microscope

Posted on by

Sometimes I need to be able to take photographs of very small things, and the so-called macro mode on my point-and-shoot camera just won’t cut it. And it never hurts to have an inspection scope on hand for tiny soldering jobs, either, though I prefer a simple jeweler’s loupe in one eye for most tasks. So I sent just over $40 off to my close friend Alibaba, and a few weeks later was the proud owner of a halfway usable inspection scope that records stills or video to an SD card.

Unfortunately, it’s only halfway useable because of chintzy interface …read more

Continue reading Hacking an Inspection Microscope→

The Arduino Foundation: What’s Up?

Posted on by

The Arduino Wars officially ended last October, and the new Arduino-manufacturing company was registered in January 2017.  At the time, we were promised an Arduino Foundation that would care for the open-source IDE and code infrastructure in an open and community-serving manner, but we don’t have one yet. Is it conspiracy? Or foul play? Our advice: don’t fret. These things take time.

But on the other hand, the Arduino community wants to know what’s going on, and there’s apparently some real confusion out there about the state of play in Arduino-land, so we interviewed the principals, Massimo Banzi and Federico …read more

Continue reading The Arduino Foundation: What’s Up?→