Author Archives: Donald Papp

Manual 3D Digitizer Works a Bit Like 3-Dimensional Measuring Tape

Posted on by

Digitizing an object usually means firing up a CAD program and keeping the calipers handy, or using a 3D scanner to create a point cloud representing an object’s surfaces. [Dzl] took an entirely different approach with his DIY manual 3D digitizer, a laser-cut and 3D printed assembly that uses rotary encoders to create a turntable with an articulated “probe arm” attached.

Each joint of the arm is also an encoder, and by reading the encoder values and applying a bit of trigonometry, the relative position of the arm’s tip can be known at all times. Manually moving the tip of …read more

Continue reading Manual 3D Digitizer Works a Bit Like 3-Dimensional Measuring Tape→

Vintage IBM 1403 Printer Problem Evades an Easy Fix

Posted on by

The Computer History Museum in Mountain View has two operational IBM 1401 mainframes, which use IBM 1403 high-speed printers. They aren’t some decades-old notion of “high speed” that barely looks sluggish today, either. These monsters slam out ten lines per second thanks to a rotating chain of type slugs and an array of electromagnetic hammers. Every 11.1 microseconds, a character in the chain would be lined up with a hammer, and if the control circuitry identified it as a character that needed to be printed, the hammer behind the paper would drive the paper into the print ribbon and the …read more

Continue reading Vintage IBM 1403 Printer Problem Evades an Easy Fix→

Behold The WT-220: A ‘Clever’ VT-220 Terminal

Posted on by

[John Whittington] failed to win a bid for an old VT-220 serial terminal on eBay, so he decided to make his own version and improve it along the way. The result is the Whitterm-220 (or WT-220) which has at its core a Raspberry Pi and is therefore capable of more than just acting as a ‘dumb’ serial terminal.

The enclosure is made from stacked panels of laser-cut plywood with an acrylic plate on the back for labels and connectors, where [John] worked paint into the label engravings before peeling off the acrylic’s protective film. By applying paint after laser-engraving but …read more

Continue reading Behold The WT-220: A ‘Clever’ VT-220 Terminal→

Behold The WT-220: A ‘Clever’ VT-220 Terminal

Posted on by

[John Whittington] failed to win a bid for an old VT-220 serial terminal on eBay, so he decided to make his own version and improve it along the way. The result is the Whitterm-220 (or WT-220) which has at its core a Raspberry Pi and is therefore capable of more than just acting as a ‘dumb’ serial terminal.

The enclosure is made from stacked panels of laser-cut plywood with an acrylic plate on the back for labels and connectors, where [John] worked paint into the label engravings before peeling off the acrylic’s protective film. By applying paint after laser-engraving but …read more

Continue reading Behold The WT-220: A ‘Clever’ VT-220 Terminal→

Cheap Multimeter Leads Come With Extra Ohms, Free!

Posted on by

[Nop head] discovered that cheap multimeter leads costing only a few bucks can come with more than one may have bargained for. The first set had a large amount of useful-looking attachments, but the wires used for the leads were steel with a resistance of about one ohm each. With two leads in use, that means any resistance measurement gets two ohms added for free. More seriously, when measuring current, the wires can heat up rapidly. Voltage measurements would be affected the least, but the attachments and lead design expose a large amount of bare metal, which invites accidental shorts …read more

Continue reading Cheap Multimeter Leads Come With Extra Ohms, Free!→

How Not to Design a 3D Printed Belt Clamp

Posted on by

[Mark Rehorst] has been busy with his Ultra MegaMax Dominator (UMMD) design for a 3D printer, and one of the many things he learned in the process was how not to design a 3D printed belt clamp. In the past, we saw how the UMMD ditched the idea of a lead screw in favor of a belt-driven Z axis, but [Mark] discovered something was amiss when the belts were flopping around a little, as though they had lost tension. Re-tensioning them worked, but only for a few days. It turned out that the belt clamp design he had chosen led …read more

Continue reading How Not to Design a 3D Printed Belt Clamp→

Young Entrepreneurs Learn What Really Goes Into Making a Product

Posted on by

Just to be clear, the primary goal of the Papas Inventeurs (Inventor Dads) was to have the kids make something, have fun, and learn. In that light, they enjoyed a huge success. Four children designed, made, and sold laser-cut napkin rings from a booth at the Ottawa Maker Faire as a fun learning process (English translation, original link in French.) [pepelepoisson] documented the entire thing from beginning to end with plenty of photos. Things started at proof of concept, then design brainstorming, prototyping, manufacture, booth design, and finally sales. While adults were involved, every step was done by the kids …read more

Continue reading Young Entrepreneurs Learn What Really Goes Into Making a Product→

Lessons Learned From A 1-Day RTL-SDR Enclosure Project

Posted on by

[ByTechLab] needed an enclosure for his R820T2 based RTL-SDR, which sports an SMA connector. Resolving to design and 3D print one in less than a day, he learned a few things about practical design for 3D printing and shared them online along with his CAD files.

The RTL-SDR is a family of economical software defined radio receivers, and [ByTechLab]’s’ enclosure (CAD files available on GrabCAD and STL on Thingiverse) is specific to his model. However, the lessons he learned are applicable to enclosure design in general, and a few of them specifically apply to 3D printing.

He started by making …read more

Continue reading Lessons Learned From A 1-Day RTL-SDR Enclosure Project→

A Cheat Sheet For Publishing Python Packages

Posted on by

[Brendan Herger] was warned that the process of publishing a Python package would be challenging. He relishes a challenge, however, and so he went at it with gusto. The exhausting process led him to share a cheat sheet for publishing Python packages with the goal of making the next time smoother, while also letting other people benefit from his experience and get a running start.

[Brendan] describes publishing a Python package as “tying together many different solutions with brittle interchanges.” His cheat sheet takes the form of an ordered workflow for getting everything in place, with some important decisions and …read more

Continue reading A Cheat Sheet For Publishing Python Packages→

A Cheat Sheet For Publishing Python Packages

Posted on by

[Brendan Herger] was warned that the process of publishing a Python package would be challenging. He relishes a challenge, however, and so he went at it with gusto. The exhausting process led him to share a cheat sheet for publishing Python packages with the goal of making the next time smoother, while also letting other people benefit from his experience and get a running start.

[Brendan] describes publishing a Python package as “tying together many different solutions with brittle interchanges.” His cheat sheet takes the form of an ordered workflow for getting everything in place, with some important decisions and …read more

Continue reading A Cheat Sheet For Publishing Python Packages→