Author Archives: Brian Benchoff

The 3D Printer Packing Problem

Posted on by

Form Labs recently announced the launch of the Fuse 1, a desktop SLS printer that will print all your parts using nylon powder and a laser. This a fundamentally different method of 3D printing as compared to filament-based machines, and the best way to use a Fuse 1 is to fill the entire volume of the machine with 3D printed parts. [Michael Fogelman] decided to investigate the 3D packing problem, and managed to fill this printer with the maximum number of 3D printed tugboats. If you’re wondering, it’s 113, as compared with 82 tiny Benchies using naive bin packing.

The …read more

Continue reading The 3D Printer Packing Problem→

Best Product Entry: Pocket Thermal Camera

Posted on by

One of the entries in the Hackaday Prize Best Product competition is [x-labz]’s pocket thermal imager. It’s more than a prototype, it’s a design conceived to get out into the world and be used by many. Best Product entries are open until July 24th, and with a $30,000 cash prize on the line let’s take a look at some of the things that elevate a project to product status.

Thanks to recent advances in the state of thermal image sensors, a tool that gives you Predator vision is almost a necessity on the modern workbench. The pocket thermal imager will …read more

Continue reading Best Product Entry: Pocket Thermal Camera→

Friday Hack Chat: Climate Change

Posted on by

This Friday, we’re talking climate change. Is it possible to remove carbon from the atmosphere before most cities are underwater? What role can hackers play in alleviating climate change? It’s all going down this Friday on the Hack Chat on Hackaday.io

We’ve invited [Tito Jankowski] and [Matthew Eshed] to talk about climate change this Friday over on hackaday.io. [Tito] and [Matthew] are the founders of Impossible Labs, and they’re looking for ways to find, test, and build technology that will remove carbon from Earth’s atmosphere. Their goal is to remove 300 parts per million of carbon dioxide by 2050. Will …read more

Continue reading Friday Hack Chat: Climate Change→

The Computer of Yesterday, Today

Posted on by

There are a handful of computers that have become true museum pieces. The Altair, of course, is tucked away in the Smithsonian’s warehouse waiting for some time in the future when Apple’s legacy fades or until there’s a remake of War Games. Likewise, the French Micral and American SCELBI are important historical artifacts, and even a modern component-accurate reproduction of an Apple I could fetch a decent amount of cash at the right auction.

There’s something special about these old kit computers – even though the instructions for these machines provided volumes of documentation, no one is building these …read more

Continue reading The Computer of Yesterday, Today→

CastAR Shuts Doors

Posted on by

Polygon reports CastAR is no more.

CastAR is the brainchild of renaissance woman [Jeri Ellsworth], who was hired by Valve to work on what would eventually become SteamVR. Valve let [Jeri] go, but allowed her to take her invention with her. [Jeri] founded a new company, Technical Illusions, with [Rick Johnson] and over the past few years the CastAR has appeared everywhere from Maker Faires to venues better focused towards innovative technologies.

In 2013, Technical Illusions got its start with a hugely successful Kickstarter, netting just north of one million dollars. This success drew the attention of investors and eventually …read more

Continue reading CastAR Shuts Doors→

Hackaday Prize Entry: Messing Around With New Vacuum Tubes

Posted on by

Vacuum tubes have been around for ages, and for better or worse, they have their advocates for use in amplifiers and preamps. However, tubes are simply inconvenient devices. Even a 12AX7 preamp tube is huge relative to a handful of transistors, tubes require weird voltages, and each and every one of them is a through-hole device that doesn’t lend itself to machine assembly.

This changed recently with the introduction a strange new tube from Japan. Noritake and Korg recently introduced a triode that uses the same packaging as VFD displays. The Korg Nutube is a vacuum tube that operates at …read more

Continue reading Hackaday Prize Entry: Messing Around With New Vacuum Tubes→

TEMPEST In A Software Defined Radio

Posted on by

In 1985, [Wim van Eck] published several technical reports on obtaining information the electromagnetic emissions of computer systems. In one analysis, [van Eck] reliably obtained data from a computer system over hundreds of meters using just a handful of components and a TV set. There were obvious security implications, and now computer systems handling highly classified data are TEMPEST shielded – an NSA specification for protection from this van Eck phreaking.

Methods of van Eck phreaking are as numerous as they are awesome. [Craig Ramsay] at Fox It has demonstrated a new method of this interesting side-channel analysis using readily …read more

Continue reading TEMPEST In A Software Defined Radio→

Hackaday Links: June 25th, 2017

Posted on by

There will be no special badges for DEFCON. Everyone will still have badges — and our expectations are tempered because of the one year on / one year off schedule for electronic badges — there just won’t be mind-bending puzzles wrapped up in the official badges. What this means: it probably won’t matter if you’re late for linecon, and someone in the DEFCON hive mind still has a Facebook. Also, DEFCON is canceled.

In the past, we have decried the very existence of fidget spinners. It’s what the kids are into, after all. However, an electronic fidget spinner is …read more

Continue reading Hackaday Links: June 25th, 2017→

Hackaday Prize Entry: A 3D Printer Management System

Posted on by

Since the first desktop 3D printers, people have been trying to figure out a way to manage desktop 3D printers and turn them into tiny little automated factories. One of the first efforts was a conveyor belt build plate that was successfully used by MakerBot until it wasn’t anymore. Octoprint has been a boon for anyone who wants to manage a few printers, but that’s only half the solution.

For his Hackaday Prize entry, [Mike] has come up with a solution that turns a desktop 3D printer into a completely automated factory. Not only does this project take care of …read more

Continue reading Hackaday Prize Entry: A 3D Printer Management System→