Author Archives: Brian Benchoff

Detoured: Caltech’s Hackerspace

Posted on by

Over the last few months, the folks over at the SupplyFrame Design Lab, home to Hackaday meetups, the Hackaday Superconference, and far, far too many interesting tools, have been spending their time visiting workshops and hackerspaces to see how they tick. Staff Designer of the Design Lab, [Majenta Strongheart], recently took a trip down the road to Caltech to check out their hackerspace. Actually, it’s a rapid prototyping lab, but a rose by any other name…

The prototyping lab at Caltech exists for a few reasons. The first, and most important, are the graduate students. This is a research facility, …read more

Continue reading Detoured: Caltech’s Hackerspace→

Robotics Module Challenge: Build Robot, Win Prizes

Posted on by

Brand new today, we’re going to go all in with the Robotics Module Challenge! This is the newest part of the 2018 Hackaday Prize which is only six weeks old, and already we’ve seen almost six hundred incredible entries. But a new challenge means a fresh start and a perfect time for you to begin your entry.

This is your call to build a module that can be used in robotics projects across the world. Twenty module designs will be awarded $1,000 and and chance at the five top prizes including the $50,000 grand prize!

Robotics is the kitchen sink …read more

Continue reading Robotics Module Challenge: Build Robot, Win Prizes→

What Does ‘Crypto’ Actually Mean?

Posted on by

This article is about crypto. It’s in the title, and the first sentence, yet the topic still remains hidden.

At Hackaday, we are deeply concerned with language. Part of this is the fact that we are a purely text-based publication, yes, but a better reason is right there in the masthead. This is Hackaday, and for more than a decade, we have countered to the notion that ‘hackers’ are only bad actors. We have railed against co-opted language for our entire existence, and our more successful stories are entirely about the use and abuse of language.

Part of this is …read more

Continue reading What Does ‘Crypto’ Actually Mean?→

Hackaday Links: April 22, 2018

Posted on by

Eagle 9 is out. Autodesk is really ramping up the updates to Eagle, so much so it’s becoming annoying. What are the cool bits this time? Busses have been improved, which is great because I’ve rarely seen anyone use busses in Eagle. There’s a new pin breakout thingy that automagically puts green lines on your pins. The smash command has been overhauled and now moving part names and values is somewhat automatic. While these sound like small updates, Autodesk is doing a lot of work here that should have been done a decade ago. It’s great.

Crypto! Bitcoin is …read more

Continue reading Hackaday Links: April 22, 2018→

Counting Without Transistors

Posted on by

The Hackaday Prize is all about Building Hope. We want to see hardware creators change the world with microcontrollers and breadboards. That’s a noble goal, but it also doesn’t mean you can’t have fun. That’s exactly what [Yann] is doing with a pile of surplus Soviet components, a bunch of bodge wire, and exactly zero transistors. He’s building a hexadecimal display module using only relays and diodes. It’s absurd, but still very very cool.

The inspiration for this build comes from homebrew computing. With this, there’s a recurring problem of displaying the status of a bus. Sure, a bank of …read more

Continue reading Counting Without Transistors→

This Is Your Last Chance To Design The Greatest In Open Hardware

Posted on by

This is the last weekend to get in on the Open Hardware Design Challenge, the first challenge of the 2018 Hackaday Prize. We’re looking for the boldest idea you can come up with. We want to see the beginnings of the next great bit of Open Hardware, and this is your chance to do it.

The Hackaday community has thrown itself into The Hackaday Prize and so far we have more than five hundred entries in the running to Build Hope and become the next great piece of Open Hardware. Next week, we’ll choose the top twenty projects to advance …read more

Continue reading This Is Your Last Chance To Design The Greatest In Open Hardware→

The One-Transistor Flip-Flop

Posted on by

A flip-flop is one of the most basic digital electronic circuits. It can most easily be built from just two transistors, although they can and have been built out of vacuum tubes, NAND and NOR gates, and Minecraft redstone. Conventional wisdom says you can’t build a flip-flop with just one transistor, but here we are. [roelh] has built a flip-flop circuit using only one transistor and some bizarre logic that’s been slowly developing over on hackaday.io.

[roelh]’s single transistor flip-flop is heavily inspired by a few of the strange logic projects we’ve seen over the years. The weirdest, by far, …read more

Continue reading The One-Transistor Flip-Flop→

Friday Hack Chat: Circuit Board Art

Posted on by

We are now in a golden age of printed circuit boards. It wasn’t too long ago that making your own circuit boards either involved a lot of money, or slightly less money and using some proprietary garbage PCB layout tool. Now, every board house speaks Gerber, and you can get a ten-pack of PCBs from China for five bucks. This incredible cost reduction means people are making art with printed circuit boards. We’ve seen portraits, landscapes, and memes. This is truly the beginning of a new artistic medium rendered in fiberglass and soldermask.

Check out this blinky bit of art …read more

Continue reading Friday Hack Chat: Circuit Board Art→

Dispensing Solder Paste Automatically

Posted on by

Through-hole chips are slowly falling by the wayside, and if you want to build something with new parts you will be using surface mount components. This means spreading paste and throwing it in the toaster oven. Of course, if you don’t want to take the time to get a stencil for your solder paste, you can always lay it down by hand. For that, [owhite] has created a tiny, handheld, robotic solder paste dispenser. It’s a robotic pen that dispenses just the right amount of solder paste on your pads.

The design of this solder paste dispenser is basically a …read more

Continue reading Dispensing Solder Paste Automatically→

Automating The Design Of Word Clocks

Posted on by

Word clocks, or a matrix of light-up letters that spell out the time, are a standard build for all enterprising electronics enthusiasts. The trouble is finding the right way to drive a matrix of LEDs and the significant amount of brainpower that goes into creating a matrix of letters that will spell out the time without making it look like it’s supposed to spell out the time.

For his Hackaday Prize entry this year, [Stephen Legge] is creating a standard toolkit that makes word clocks easier to build. It’s a hardware and software project, allowing for LED matrices of any …read more

Continue reading Automating The Design Of Word Clocks→