Author Archives: Brian Benchoff

Software USB On the ESP8266

Posted on by

A while back, [cnlohr] needed a USB keyboard and mouse. His box ‘o junk didn’t hold this particular treasure, and instead of hopping on Amazon like a normal geek or venturing into the outside realm on a mid-level ‘store’ quest like a normal person, [cnlohr] decided to turn an ESP8266 into a USB keyboard and mouse. How hard could it be? The ESP doesn’t support USB, but bitbanging hasn’t stopped him before. The end result is a USB stack running on the ESP8266 WiFI module.

[cnlohr] has been working for about a month on this USB implementation for the …read more

Continue reading Software USB On the ESP8266→

Decoding Rediscovered Rope Memory From the Apollo Guidance Computer

Posted on by

On August 25th, 1966, an Apollo Command Module was launched aboard a Saturn IB rocket in mission AS-202. This mission was intended to immediately precede the ill-fated Apollo 1 mission, the AS-202 was unmanned, serving as a test of flight hardware, fuel cells, and the guidance and navigation control systems. This mission used the first Apollo Guidance Computer ever flown, and this mission was vital to testing the computer that would take men to the moon.

While the software from the later missions exists and is available on Github, the earlier Block I spacecraft, including the unmanned Apollo 4 and …read more

Continue reading Decoding Rediscovered Rope Memory From the Apollo Guidance Computer→

Inventable Releases Improved X-Carve CNC Router

Posted on by

Introduced last year as an improvement on the very popular Shapeoko CNC router, the X-Carve by Inventables has grown to be a very well-respected machine in the community. It’s even better if you throw a DeWalt spindle on there, allowing you to cut almost everything that’s not steel. With a recent upgrade to the X-Carve, it’s even more capable, featuring the best mods and suggestions from the community that has grown up around this machine.

The newest iteration of the X-Carve features higher power drivers, better rigidity, and a heat sink for the spindle. That last item is an interesting …read more

Continue reading Inventable Releases Improved X-Carve CNC Router→

Hackaday Prize Entry: Open Sip And Puff

Posted on by

A sip-and-puff device is an assistive technology used by people who cannot use their hands. Being a quasi-medical device, you can imagine this technology is extremely expensive, incapable of being modified, and basically a black box that can’t do anything except what it was designed for. For his Hackaday Prize entry, [Jason] is building his own sip-and-puff interface that’s cheaper and more capable than the available commercial versions.

Sip-and-puff devices can be mapped to control a wheelchair, click a mouse, or press a key on a keyboard. You can do a lot with USB, so for this open sip-and-puff device, …read more

Continue reading Hackaday Prize Entry: Open Sip And Puff→

Internet Of Things Woodworking

Posted on by

Woodworking is the fine art of building jigs. Even though we have Internet-connected toasters, thermostats, cars, and coffee makers, the Internet of Things hasn’t really appeared in the woodshop quite yet. That’s changing, though, and [Ben Brandt]’s Internet of Things box joint jig shows off exactly what cheap computers with a connection to the Internet can do. He’s fully automated the process of making box joints, all with the help of a stepper motor and a Raspberry Pi.

[Ben]’s electronic box joint jig is heavily inspired by [Matthias Wandel]’s fantastic screw advance box joint jig. [Matthias]’ build, which has become …read more

Continue reading Internet Of Things Woodworking→

Four Of Our Favorite Hardware Talks

Posted on by

The Hackaday SuperConference is the greatest gathering of hardware hackers on the planet. Last year at the SuperCon, we saw talks on building systems from scratch, creating new and interesting uses for technology, and bringing those electronic bits to market. What are we talking about? Here are four of the best talks from last year’s Hackaday SuperConference:

[Shanni Prutchi] is an ECE student at Rowan University, and has already published papers on radio astronomy and metrology. Her provides an overview of building her own source of quantum entangled photons and how these photons can be used. Quantum Key Distribution is …read more

Continue reading Four Of Our Favorite Hardware Talks→

Review: Monoprice Maker Ultimate 3D Printer

Posted on by

A few months ago, a very inexpensive 3D printer appeared on Monoprice. My curiosity for this printer was worth more than $200, so I picked one of these machines up. The Monoprice MP Select Mini is an awesome 3D printer. It’s the perfect printer to buy for a 13-year-old who might be going through a ‘3D printing phase’. It’s a great printer to print a better printer on. This printer is a sign the 3D printing industry is not collapsing, despite Makerbot, and foreshadows the coming age of consumer 3D printers.

The MP Select Mini isn’t Monoprice’s only 3D printer; …read more

Continue reading Review: Monoprice Maker Ultimate 3D Printer→

Hackaday Prize Entry: 1337 Haxxor Keyboards

Posted on by

If you’re like us, you spend most of your time in front of a computer keyboard, wondering where your life went wrong. [AnonymouSmst] has a slightly more positive outlook on life, which led them to create a truly DIY keyboard with OLEDs, Bluetooth, NFC, Analog joysticks, an ‘Internet of Things thingy’, local storage, and ostentatious backlighting. It’s a 1337 h4x0r keyboard, and one of the coolest input devices we’ve seen since that weird GameCube controller.

[AnonymouSmst] was one of the very elite, very privileged hackers that made it out to the Hackaday Munich meetup where [sprite_tm] first demoed his firmware …read more

Continue reading Hackaday Prize Entry: 1337 Haxxor Keyboards→

Hackaday Prize: 20 Projects That Are The Height Of Automation

Posted on by

Automation makes the world go around. Whether it’s replacing elevator attendants with buttons, replacing songwriters with computer algorithms, or giving rovers on Mars the same sense and avoid capability as a Tesla, Automation makes our lives easier and better. Today we’re excited to announce the twenty projects that best demonstrate the possibilities of Automation in the running for the 2016 Hackaday Prize. These projects tackled problems ranging from improving the common stepper motor to flying Lidar around a neighborhood on a gigantic ducted fan.

The winners of the Hackaday Prize automation challenge are, in no particular order:

  • RelayRepRap
  • HeadsUp, A

…read more

Continue reading Hackaday Prize: 20 Projects That Are The Height Of Automation→

Building Better Tube Amps With Heathkit Parts

Posted on by

[Justin] had been trying to find a good tube amp for years, but all the best examples were either expensive or a complete basket case. Instead of buying a vintage stereo tube amp, he decided to build his own using the guts of a Heathkit AA-100, a popular tube amp from the 60s and 70s that doesn’t have a great reputation for sound quality.

This project was based on an earlier project from a decade ago that replicated the very popular Dynaco ST-70 tube amp from parts taken from the Heathkit AA-100. The schematic for this conversion was readily available …read more

Continue reading Building Better Tube Amps With Heathkit Parts→