Author Archives: Brian Benchoff

A 3D Printed Camera (Including The Lens)

Posted on by

Barring the RepRap project, we usually see 3D printers make either replacement parts or small assemblies, not an entire finished product. [Amos] is the exception to this rule with his entirely 3D-printed camera. Everything in this camera is 3D printed, from the shutter to the lightproof box to the lens itself. It’s an amazing piece of engineering, and a testament to how far 3D printing has come in just a few short years.

35mm film is the most common film by far, and the only one that’s still easy to get and have developed at a reasonable price. This 3D-printed …read more

Continue reading A 3D Printed Camera (Including The Lens)→

Hackaday Prize Entry: Characterizing LED and Laser Diodes

Posted on by

Needless to say, we’re fascinated by LEDs, laser diodes, and other blinkies. Although we can get just about any light emitting thing, the data sheets aren’t always accurate or available. For his Hackaday Prize entry, [Ted] is building a device to characterize the efficiency, I/V curve, and optical properties of all the blinkies. It’s a project to make glowy stuff better, and a great entry for the Hackaday Prize.

The inspiration for this project came from two of [Ted]’s projects, one requiring response curves for LEDs, and laser diodes for another. This would give him a graph of optical output vs. current, …read more

Continue reading Hackaday Prize Entry: Characterizing LED and Laser Diodes→

Hackaday Prize Entry: Boots And Cats And Boots And Cats

Posted on by

Electronic drums are pricey, but the drums themselves are actually very easy to make. By simply putting a few piezos on some rubber mats, you can make a set of electronic drums. The real trick, and the expensive bit, is in the drum module. This module has inputs for the high hat, snare, toms, and bass drum to turn the repetitive thwaking of a stick on a rubber mat into drum sounds.

For his Hackaday Prize entry, [Jeremy] isn’t building a set of electronic drums. He’s building a drum module, complete with touchscreen interface and a GUI.

This isn’t [Jeremy]’s …read more

Continue reading Hackaday Prize Entry: Boots And Cats And Boots And Cats→

Top Ten Reasons Not To Buy A Fake MacBook Charger. Number Eight Will Shock You.

Posted on by

Yesterday, Apple showed the world how courageous they are by abandoning their entire PC market. It’s not time for a eulogy quite yet, but needless to say, Apple hardware was great, and the charger was even better. It had Magsafe, and didn’t start fires. What more could you ask for?

When it comes to fake MacBook chargers, you can ask for a lot more. [Ken Shirriff] has torn apart a number of these chargers, and his investigations allowed for an obvious pun in this post. The fake ones will make sparks thanks to the cost-saving design, and shouldn’t be used …read more

Continue reading Top Ten Reasons Not To Buy A Fake MacBook Charger. Number Eight Will Shock You.→

Hackaday Prize Entry: An Electric Bike And A Dashboard

Posted on by

Over the last few years, powerful brushless motors have become very cheap, batteries have become very powerful, and the world of quadcopters has brought us very capable electronic speed controls. Sounds like the perfect storm for a bunch of electric bike hacks, right? That’s what [bosko] is doing for his Hackaday Prize Entry. He’s building an e-bike with a big motor and an electronic dashboard, because a simple throttle switch would never do.

There are two parts to [bosko]’s bike, with the front brain box consisting of GPS, an OLED display, analog throttle, and a few wireless modules to connect …read more

Continue reading Hackaday Prize Entry: An Electric Bike And A Dashboard→

Hackaday Prize Entry: Adblock For TV

Posted on by

Contact, the 1985 book by Carl Sagan, was significantly better than the movie. Five people went through the wormhole, three machines were made (in Russia, Wyoming, and a third on Hokkaido), Erbium did something, and the novelization provided much better worldbuilding. One of the more interesting characters in the book was H.R. Haddon, the meglomanicalical business man, made his first million designing a chip that would block advertisements on TV. The book strongly suggests this commercial-blocking chip was a purely analog device, a concept that would have been an amazing abuse of NTSC produced by a damn fine engineer. …read more

Continue reading Hackaday Prize Entry: Adblock For TV→

New Part Day: The ESP32 Has Been Released

Posted on by

A few years ago, a strange little chip showed up on Seeed Studio one day. It was the ESP8266, originally sold as a serial to WiFi adapter. Since then, the microcontroller in this wee WiFi module was discovered, and the ESP8266 has been the breakout module for hundreds of Internet of Thing modules, and other wireless baubles.

The company behind the ESP8266, Espressif, wasn’t sitting on their laurels for the last few years. They’ve been working on a followup to the ESP8266. It’s the ESP32, and it’s faster, has more peripherals, better WiFi, and Bluetooth LE. Since Christmas, we’ve been …read more

Continue reading New Part Day: The ESP32 Has Been Released→

Hackaday Prize Entry: A One Hand Bottle Opener

Posted on by

For the next month, the Hackaday Prize is all about Assistive Technologies. You would think this means exoskeletons, 3D printed prosthetics, and better wheelchairs, and you’d be right. This project in the running for the Assistive Technologies portion of the prize isn’t what you would expect. It’s a brilliantly simple way to open a water bottle with one hand. Think of it as the minimum viable project for assistive technologies, and a brilliant use of a few 3D printed parts and some metric bolts.

The OHBO – the One Hand Bottle Opener – is just a simple 3D printed ring …read more

Continue reading Hackaday Prize Entry: A One Hand Bottle Opener→

Hackaday Prize Entry: Lucid Dreaming Research

Posted on by

Lucid dreaming is one of the rare psychological phenomenon terrible sci-fi frequently gets right. Yes, lucid dreaming does exist, and one of the best ways to turn a normal dream into a lucid dream is to fixate on a particular object, sound, or smell. For their Hackaday Prize entry, [Jae] is building a device to turn the electronic enthusiast community on to lucid dreaming. It’s a research platform that allows anyone to study their own dreams and access a world where you can do anything.

The core of this project is an 8-channel EEG used to measure the electrical activity …read more

Continue reading Hackaday Prize Entry: Lucid Dreaming Research→

Hackaday Links: September 4, 2016

Posted on by

Nozzle socks! Just keep saying, ‘nozzle socks’ until the semantic satiation undoes any semblance of sanity. E3D, makers of the world’s finest 3D printer hotends have released silicone nozzle covers that prevent caramelized plastic gunking up your hot end. Nozzle socks.

Let’s talk guitar pedals. If you’ve ever built your own guitar pedal, you probably stuffed it inside a Hammond enclosure. There’s more to guitar pedal enclosures than custom-painted electronic boxes, and arguably the best enclosures are the ‘Boss’ style – a metal cover over the switch that can be removed to access the battery independently of the circuit. Now …read more

Continue reading Hackaday Links: September 4, 2016→