Category Archives: VCF

This Weekend: Vintage Computer Festival West

Posted on by

Next weekend is the Vintage Computer Festival West, held at the Computer History Museum. Hackaday is once again proud to sponsor this event that brings together the people and hardware that drove the information revolution. [Bil Herd] and [Joshua Vasquez] will be on hand representing the Hackaday Crew.

This year’s talks show an impressive lineup of people. [Bil Herd] will be on stage with a collection of other engineers who secured Commodore’s place in history. The Computer History Museum has a very active restoration program for original computer hardware. Friend of Hackaday, [Ken Shirriff], has been working on a restoration …read more

Continue reading This Weekend: Vintage Computer Festival West→

Old Part Day: Voltage Controlled Filters

Posted on by

For thirty years, the classic synths of the late 70s and early 80s could not be reproduced. Part of the reason for this is market forces — the synth heads of the 80s didn’t want last year’s gear. The other part for the impossibility to build new versions of these synths was the lack of parts. Synths such as the Prophet 5, Fairlight CMI, and Korg Mono/Poly relied on voltage controlled filter ICs — the SSM2044 — that you can’t buy new anymore. If you can source a used one, be prepared to pay $30. New old stock costs about …read more

Continue reading Old Part Day: Voltage Controlled Filters→

The Best Of VCF East

Posted on by

Last weekend was the Vintage Computer Festival East in Wall, New Jersey. While this yearly gathering of nerds nerding out on old computers might be a bit too obscure for some, there are always amazing exhibits of actual historical importance. A few Enigma machines showed up, and the rarest Commodore goodies made an appearance. We saw the pre-history of Hackaday and ‘maker’ culture with Southwest Technical Products Corporation, and found out it was probably, possible to build a RepRap in the 80s. You can’t know where you’re going unless you know where you came from, and even though the old …read more

Continue reading The Best Of VCF East→

VCF: Popular Electronics And Southwest Technical Products Corporation

Posted on by

Hackaday owes a lot to the hobbyist electronics magazines of yesteryear. Back in the day, Popular Electronics and Radio-Electronics would publish projects and articles about DIY electronics – more or less the same editorial purview we hold today. Some of these projects would become full-fledged products, and you need only look at the Altair for what can happen at this confluence of publishing and engineering.

One of the more popular companies to come out of these hobbyist trade magazines was SWTPC, or Southwest Technical Products Corporation. This was the company that brought one of the first microcomputers to the masses …read more

Continue reading VCF: Popular Electronics And Southwest Technical Products Corporation→

VCF East: Enigma Machines In The Flesh

Posted on by

At the end of World War II, the Germans ordered all Enigma cipher machines destroyed. Around the same time, Churchill ordered all Enigma cipher machines destroyed. Add a few decades, neglect the efforts of Polish codebreakers, and make a movie about Alan Turing and an offensively historically incorrect love interest, and you have a mystique around these rare, innovative cipher machine.

At the Vintage Computer Festival East, I was privy to what is probably the largest collection of Enigma machines on the planet. The exhibit comes from [Tom] and [Dan Perera] of Enigma Museum. Right now, they’re they only place …read more

Continue reading VCF East: Enigma Machines In The Flesh→

VCF: The Guys Keeping Up With Commodore

Posted on by

This year at the Vintage Computer Festival, war was beginning. The organizers of the con pulled a coup this year, and instead of giving individual exhibitors a space dedicated to their wares, various factions in the war of the 8-bitters were encouraged to pool their resources and create the best exhibit for their particular brand of home computers. The battle raged between the Trash-80 camp and the Apple resistance. In the end, only one home computer exhibit would remain. Are you keeping up with Commodore? Because Commodore is keeping up with you. This exhibit from [Anthony Becker], [Chris Fala], [Todd …read more

Continue reading VCF: The Guys Keeping Up With Commodore→

VCF East: Before There Was Arduino, We Had Balls

Posted on by

Today, if you want to teach kids the art of counting to one, you’re going to drag out a computer or an iPad. Install Scratch. Break out an Arduino, or something. This is high technology to solve the simple problem of teaching ANDs and ORs, counting to 0x0F, and very basic algorithms.

At the Vintage Computer Festival East this year, System Source, proprietors of a fantastic museum of not-quite-computing equipment brought out a few of their best exhibits. These include mechanical calculators, toys from the 60s, and analog computers that are today more at home in a CS departments’ storage …read more

Continue reading VCF East: Before There Was Arduino, We Had Balls→

VCF: 3D Printing In The 80s

Posted on by

The Vintage Computer Festival East is going down right now, and I’m surrounded by the height of technology from the 1970s and 80s. Oddly enough, Hackaday frequently covers another technology from the 80s, although you wouldn’t think of it as such. 3D printing was invented in the late 1980s, and since patents are only around for 20 years, this means 3D printing first became popular back in the 2000’s.

In the 1970s, the first personal computers came out of garages. In the early 2000s, the first 3D printers came out of workshops and hackerspaces. These parallels pose an interesting question …read more

Continue reading VCF: 3D Printing In The 80s→

VCF: 3D Printing In The 80s

Posted on by

The Vintage Computer Festival East is going down right now, and I’m surrounded by the height of technology from the 1970s and 80s. Oddly enough, Hackaday frequently covers another technology from the 80s, although you wouldn’t think of it as such. 3D printing was invented in the late 1980s, and since patents are only around for 20 years, this means 3D printing first became popular back in the 2000’s.

In the 1970s, the first personal computers came out of garages. In the early 2000s, the first 3D printers came out of workshops and hackerspaces. These parallels pose an interesting question …read more

Continue reading VCF: 3D Printing In The 80s→

Vintage Computer Festival Switzerland This Weekend

Posted on by

This weekend marks the Vintage Computer Festival Europe – Switzerland, a two-day extravaganza of vintage hardware held in Zurich, Switzerland.

Of interest for this VCF will be an LGP-30 replica (a computer without RAM or ROM released in 1956), an IBM System/360 front panel, lots of blinkenlights, Swiss computers, and [Oscarv], creator of the very successful PiDP-8/I project on Hackaday.io, will be there with his minified PiDP-11/70. If you don’t have one of [Oscar]’s PiDP8 machines sitting on your desk yet, don’t worry — the 11/70 is the one you really want. It is beautiful.

As you would expect from …read more

Continue reading Vintage Computer Festival Switzerland This Weekend→