Category Archives: silicone

Tricked-Out Tablet Becomes Workbench Tool

Posted on by

The workbench of the typical electronics hobbyist today would probably be largely recognizable by Heathkit builders back in the 60s and 70s. But where the techs and tinkerers of yesteryear would have had a real dead-tree SAMS Photofact schematic spread out on the bench, today you’ll get more use out of a flat-screen display for data sheets and schematics, and this handy shop Frankentablet might be just the thing to build.

Tablets like the older Nexus 9 that [enginoor] used as the basis for this build have a little bit of a form-factor problem because unlike a laptop, a tablet …read more

Continue reading Tricked-Out Tablet Becomes Workbench Tool→

A Solar Freakin’ Walkway

Posted on by

Looking to add a little pizzazz to your back garden? Are those strings of lights hung in the trees looking a little dated? Why not try lighting your garden path with DIY solar-powered pavers?

If [jfarro]’s project looks like a miniature version of the much-touted solar freakin’ roadways concept, rest assured that there are huge differences. For one, these lighted pavers actually work — trust me on this; I live not far from the demo site for the Solar Roadways and the degree to which it underwhelms cannot be overstated. Granted, a garden path is a lot simpler to engineer …read more

Continue reading A Solar Freakin’ Walkway→

A Great Way to Make Quick and Easy Knobs

Posted on by

Here’s a great way to quickly and easily make attractive and functional knobs with no tools required. All you need is some casting resin (epoxy would do in a pinch), a silicone mold intended for candy, and some socket head bolts. With the right preparation and a bit of careful placement and attention, smooth and functional knob ends are only minutes away. Embedded below is a short video demonstrating the process.

These may not replace purpose-made knobs for final products, but for prototypes or to use around the shop on jigs, clamps, or furniture they certainly fit the bill. With …read more

Continue reading A Great Way to Make Quick and Easy Knobs→

Silicone Molds for Stove-Top Metal Casting

Posted on by

Casting metal parts from 3D-printed plastic or Styrofoam models is all the rage these days, and for good reason — casting is a way to turn one-offs into mass-produced parts. Seems like most of the metal casting projects we feature are aluminum in sand molds, though, so it’s refreshing to see a casting project using silicone molds to cast low-melting point metals.

Don’t get us wrong — sand-cast aluminum is a great method that can even be used to build a lathe from scratch. But not everyone wants to build a foundry and learn the sometimes fussy craft of creating …read more

Continue reading Silicone Molds for Stove-Top Metal Casting→

A Flexible Sensor That Moves With You

Posted on by

If you have a project in mind that requires some sort of gesture input or precise movements, it might become a nettlesome problem to tackle. Fear this obstacle no longer: a team from the Wyss Institute for Biologically Inspired Engineering at Harvard have designed a novel way to make wearable sensors that can stretch and contort with the body’s natural movements.

The way they work is ingenious. Layers of silicone are sandwiched between two lengths of silver-plated conductive fabric forming — by some approximation — a capacitance sensor. While the total surface area doesn’t change when the sensor is stretched …read more

Continue reading A Flexible Sensor That Moves With You→

Self-assembling Polymers Support Silicone 3D Prints

Posted on by

We all know what the ultimate goal of 3D printing is: to be able to print parts for everything, including our own bodies. To achieve that potential, we need better ways to print soft materials, and that means we need better ways to support prints while they’re in progress.

That’s the focus of an academic paper looking at printing silicone within oil-based microgels. Lead author [Christopher S. O’Bryan] and team from the Soft Matter Research Lab at the University of Florida Gainesville have developed a method using self-assembling polymers soaked in mineral oil as a matrix into which silicone elastomers …read more

Continue reading Self-assembling Polymers Support Silicone 3D Prints→

3D Printing With Yarn and Silicone

Posted on by

This one is apparently a few years old, but the idea looks so good that we’re left wondering whatever happened to it.

[Seyi Sosanya] made what amounts to a 3D printer, but one that prints in a unique way: wrapping yarn around pillars and then post-dipping them in a silicone glue. The result is a tough, flexible 3D mesh that’s lightweight and looks fairly resilient. We’re not at all sure what it’s good for, but watching the video about the project (embedded below) makes us want to try our hand at this sort of thing.

So what happened? Where did …read more

Continue reading 3D Printing With Yarn and Silicone→

Flexible, Sensitive Sensors from Silly Putty and Graphene

Posted on by

Everyone’s favorite viscoelastic non-Newtonian fluid has a new use, besides bouncing, stretching, and getting caught in your kid’s hair. Yes, it’s Silly Putty, and when mixed with graphene it turns out to make a dandy force sensor.

To be clear, [Jonathan Coleman] and his colleagues at Trinity College in Dublin aren’t buying the familiar plastic eggs from the local toy store for their experiments. They’re making they’re own silicone polymers, but their methods (listed in this paywalled article from the journal Science) are actually easy to replicate. They just mix silicone oil, or polydimethylsiloxane (PDMS), with boric acid, and apply …read more

Continue reading Flexible, Sensitive Sensors from Silly Putty and Graphene→

A Short Introduction to Staking and Potting

Posted on by

Staking and potting are not often used in the hobby electronics world, not really entering to the common vernacular. However, everyone who’s ever busted out a glue-gun to convince that dang wire that keeps coming loose to stay has done it.

However, as [Sean Thomas] touches on, staking is not necessarily as easy as a dob of hot glue. There is a method to the madness. [Sean] gives some examples in pictures, but also directs people to the excellent NASA standard methods for staking. It’s surprising how many unintuitive caveats there are to the proper technique.

Potting, or covering everything …read more

Continue reading A Short Introduction to Staking and Potting→