Category Archives: Hackaday Prize

Hackaday Prize Entry: A Modern, Universal Power Glove

Posted on by

The Nintendo Power Glove was one of the amazing 1980s experiments in alternative user interfaces for video games. It was bad. It was cool, but it was bad. Recently, interest in the Power Glove has grown thanks to an amazing stop motion animator. Prices of these gloves have gone through the roof, and the Power Glove is in the middle of a resurgence not seen since the feature-length motion picture advertisement for Super Mario Bros. 3.

[Nolan Moore] is a fan of the Power Glove, and after finding a highly collectible new in box Power Glove, he decided to …read more

Continue reading Hackaday Prize Entry: A Modern, Universal Power Glove→

Hackaday Prize Entry: The Fog – The Cloud At Ground Level

Posted on by

I did not coin the phrase in this article’s headline. It came, I believe, from an asinine press release I read years ago. It was a stupid phrase then, and it’s a stupid phrase now, but the idea behind it does have some merit. A collaborative Dropbox running on hardware you own isn’t a bad idea, and a physical device that does the same is a pretty good idea. That’s the idea behind the USB Borg Drive. It’s two (or more) mirrored USB thumb drives linked together by condescending condensation saying you too can have the cloud in both your …read more

Continue reading Hackaday Prize Entry: The Fog – The Cloud At Ground Level→

Hackaday Prize Entry: The Open Voice Factory

Posted on by

Joe’s little brother Richard has never been able to speak. When Richard turned 19, he received a device not unlike the voice box of Stephen Hawking. Suddenly, Richard was able to communicate using thousands of words, and everyone could understand him. In the UK, there are thousands of people who could benefit from this technology, but can’t afford one. This is the inspiration for the Open Voice Factory, a device that allows anyone to create pages of touch screen interfaces and parses them into functioning speech aids.

The basic idea behind the Open Voice Factory is — wait for it …read more

Continue reading Hackaday Prize Entry: The Open Voice Factory→

Hackaday Prize Entry: Antigravity Arm Floaties

Posted on by

A few years ago, [Mike] heard about orthotic devices for people in wheelchairs that make it easier to them to move their arms. His daughter had the opportunity to demo one of these devices, and the results with the device were good. The fights with the insurance company were not so good, but this really was a device that could be made on a 3D printer with a few rubber bands, after all. Thus, [Mike] invented 3D printed antigravity arm floaties.

The name basically tells the story — these antigravity arm floaties work well to counter the pull of gravity …read more

Continue reading Hackaday Prize Entry: Antigravity Arm Floaties→

Hackaday Prize Entry: 3D Prints For The Visually Impaired

Posted on by

Students with visual impairments can have difficulty with visual and spatial relationships. 3D printers can print almost everything, and with a lot of CAD work, this project in the Hackaday Prize provides these students with physical objects to learn any subject.

[Joan] and [Whosawhatsis] have already written the book on 3D printed science projects and have produced a 3D printed Braille map of a campus, but for this project, they’re making things a little bit simpler. Visually impaired students are tactile learners and the simplest of their 3D printable objects are fixed volume objects. This collection of 3D printable cylinders, …read more

Continue reading Hackaday Prize Entry: 3D Prints For The Visually Impaired→

Hackaday Prize Entry: Simpsons Hands

Posted on by

The creators of this Hackaday Prize entry say every month a new 3D-printed prosthetic solution comes on the scene. That doesn’t mean they’re not doing something different with their entry; yes, they’re still building a prosthetic hand, but they’re putting their own spin on it. This one isn’t using a string/cable/tendon setup, and the hand doesn’t even have four fingers. [Giovanni] and [Jenny] are going their own way, and what they’ve come up with is pretty special.

The most obvious feature of this prosthetic hand is a missing digit – Simpsons Hands – but this makes a lot of sense …read more

Continue reading Hackaday Prize Entry: Simpsons Hands→

Hackaday Prize Entry: Simpsons Hands

Posted on by

The creators of this Hackaday Prize entry say every month a new 3D-printed prosthetic solution comes on the scene. That doesn’t mean they’re not doing something different with their entry; yes, they’re still building a prosthetic hand, but they’re putting their own spin on it. This one isn’t using a string/cable/tendon setup, and the hand doesn’t even have four fingers. [Giovanni] and [Jenny] are going their own way, and what they’ve come up with is pretty special.

The most obvious feature of this prosthetic hand is a missing digit – Simpsons Hands – but this makes a lot of sense …read more

Continue reading Hackaday Prize Entry: Simpsons Hands→

Hackaday Prize Entry: Tongue Computer Interface

Posted on by

The Hackaday Prize is a celebration of the greatest hardware put together by the greatest hackers on the planet. If you go over the entries, you’ll find user interfaces for everything. Need a wheelchair controlled by eye gaze? That won last year. A foot controlled mouse? Done. Need a device to talk to the Internet while you’re in a lucid dream? We’ve seen that.

We’ve seen a lot of really cool, really strange stuff in the Hackaday Prize. We haven’t seen anything like Pallette, a finalist for the Assistive Technologies portion of this year’s prize. It’s a tongue-computer interface. You …read more

Continue reading Hackaday Prize Entry: Tongue Computer Interface→

Hackaday Prize Entry: Tongue Computer Interface

Posted on by

The Hackaday Prize is a celebration of the greatest hardware put together by the greatest hackers on the planet. If you go over the entries, you’ll find user interfaces for everything. Need a wheelchair controlled by eye gaze? That won last year. A foot controlled mouse? Done. Need a device to talk to the Internet while you’re in a lucid dream? We’ve seen that.

We’ve seen a lot of really cool, really strange stuff in the Hackaday Prize. We haven’t seen anything like Pallette, a finalist for the Assistive Technologies portion of this year’s prize. It’s a tongue-computer interface. You …read more

Continue reading Hackaday Prize Entry: Tongue Computer Interface→

Hackaday Prize Entry: The Internet Of Casts

Posted on by

[Alex]’s entry for the Hackaday Prize is extremely simple: it’s a device to monitor the inside of casts. For every itch, for every broken bone, for every skin irritation, and for every episode of House that featured compartment syndrome, the CastMinder has an answer.

The CastMinder is a simple electronic device embedded inside an orthopedic cast. Attached to this tiny bit of electronics are a few sensors, relaying pressure, moisture, temperature, and of course the battery level to an iOS app. The use case for this device is actually very simple; the pressure sensor is a great idea if you …read more

Continue reading Hackaday Prize Entry: The Internet Of Casts→