Category Archives: furnace

Fail of the Week: When Good Foundries Go Bad

Posted on by

Like many of us, [Tony] was entranced by the idea of casting metal, and set about building the tools he’d need to melt aluminum for lost-PLA casting. Little did he know that he was about to exceed the limits of his system and melt a hole in his patio.

[Tony]’s tale of woe begins innocently enough, and where it usually begins for wannabe metal casters: with [The King of Random]’s homemade foundry-in-a-bucket. It’s just a steel pail with a homebrew refractory lining poured in place, with a hole near the bottom to act as a nozzle for forced air, or  …read more

Continue reading Fail of the Week: When Good Foundries Go Bad→

Move Over Aluminum: Cast Iron for the Home Foundry

Posted on by

When it comes to choice of metals that can be melted in the home foundry, it’s a little like [Henry Ford]’s famous quip: you can melt any metal you want, as long as it’s aluminum. Not that there’s anything wrong with that; there’s a lot you can accomplish by casting aluminum. But imagine what you could accomplish by recycling cast iron instead.

It looks like [luckygen1001] knows a thing or two about slinging hot metal around. The video below shows a fairly expansive shop and some pretty unique tools he uses to recycle cast iron; we were especially impressed with …read more

Continue reading Move Over Aluminum: Cast Iron for the Home Foundry→

Cook Up Your Own High-Temperature Superconductors

Posted on by

It looks more like a charcoal briquette than anything, but the black brittle thing at the bottom of [Ben Krasnow]’s crucible is actually a superconducting ceramic that can levitate magnets when it’s sitting in liquid nitrogen. And with [Ben]’s help, you can make some too.

Superconductors that can work at the relatively high temperature of liquid nitrogen instead of ultracold liquid helium are pretty easy to come by commercially, so if you’re looking to just float a few magnets, it would be a lot easier to just hit eBay. But getting there is half the fun, and from the look …read more

Continue reading Cook Up Your Own High-Temperature Superconductors→

Making a Gun Without a 3D Printer

Posted on by

Around four years ago the world was up in arms over the first gun to be 3D printed. The hype was largely due to the fact that most people don’t understand how easy it is to build a gun without a 3D printer. To that end, you don’t even need access to metal stock, as [FarmCraft101] shows us with this gun made out of melted aluminum cans.

The build starts off by melting over 200 cans down into metal ingots, and then constructing a mold for the gun’s lower. This is the part that is legally regulated (at least in …read more

Continue reading Making a Gun Without a 3D Printer→

Celebrating a Subscriber Milestone with a Copper YouTube Play Button

Posted on by

YouTube channels unboxing their latest “Play Button Award,” a replica of the famous logo in silver, gold, or faux-diamond depending on the popularity of the channel, are getting passé. But a metalworking channel that makes its own copper Play Button award to celebrate 25,000 subs is something worth watching.

[Chris DePrisco] is a bit of a jack-of-all-trades, working in various materials but with a strong focus on metalwork. He recently completed a beefy home-brew vertical milling center; we covered his attempt to leverage that platform by adding an extruder and turning it into a large bed 3D printer. For the …read more

Continue reading Celebrating a Subscriber Milestone with a Copper YouTube Play Button→

The Fab Lab Next Door: DIY Semiconductors

Posted on by

You think you’ve got it going on because you can wire up some eBay modules and make some LEDs blink, or because you designed your own PCB, or maybe even because you’re an RF wizard. Then you see that someone is fabricating semiconductors at home, and you realize there’s always another mountain to climb.

We were mesmerized when we first saw [Sam Zeloof]’s awesome garage-turned-semiconductor fab lab. He says he’s only been acquiring equipment since October of 2016, but in that short time he’s built quite an impressive array of gear; a spin-coating centrifuge, furnaces, tons of lab supplies and …read more

Continue reading The Fab Lab Next Door: DIY Semiconductors→

Flying Balls of Molten Aluminum!

Posted on by

We’re replacing “holy moley” in our vocabulary. Levitating globs of molten aluminum are that much more amazing. It’s not that we couldn’t believe it would work — we understand the physics after the fact. It’s just that we never would have thought to build an induction forge that can simultaneously melt and levitate a chunk of aluminum. (Video embedded below.)

[imsmoother] has had plans for 3 kW and 10 kW induction heaters online since at least 2011, and we’re wondering how we haven’t covered it before. Anyway, in the video, he’s using the smaller of the two to melt a …read more

Continue reading Flying Balls of Molten Aluminum!→