Category Archives: cutter

Making an Ultrasonic Cutter for Post-processing Tiny 3D Prints

Posted on by

An ultrasonic knife is a blade that vibrates a tiny amount at a high frequency, giving the knife edge minor superpowers. It gets used much like any other blade, but it becomes far easier to cut through troublesome materials like rubber or hard plastics. I was always curious about them, and recently made my own by modifying another tool. It turns out that an ultrasonic scaling tool intended for dental use can fairly easily be turned into a nimble little ultrasonic cutter for fine detail work.

I originally started thinking about an ultrasonic knife to make removing supports from SLA …read more

Continue reading Making an Ultrasonic Cutter for Post-processing Tiny 3D Prints→

Making an Ultrasonic Cutter for Post-processing Tiny 3D Prints

Posted on by

An ultrasonic knife is a blade that vibrates a tiny amount at a high frequency, giving the knife edge minor superpowers. It gets used much like any other blade, but it becomes far easier to cut through troublesome materials like rubber or hard plastics. I was always curious about them, and recently made my own by modifying another tool. It turns out that an ultrasonic scaling tool intended for dental use can fairly easily be turned into a nimble little ultrasonic cutter for fine detail work.

I originally started thinking about an ultrasonic knife to make removing supports from SLA …read more

Continue reading Making an Ultrasonic Cutter for Post-processing Tiny 3D Prints→

The How and Why of Tungsten Carbide Inserts, and a Factory Tour

Posted on by

It seems a touch ironic that one of the main consumables in the machining industry is made out of one of the hardest, toughest substances there is. But such is the case for tungsten carbide inserts, the flecks of material that form the business end of most of the tools used to shape metal. And thanks to one of the biggest suppliers of inserts, Sweden’s Sandvik Coromant, we get this fascinating peek at how they’re manufactured.

For anyone into machining, the video below is a must see. For those not in the know, tungsten carbide inserts are the replaceable bits …read more

Continue reading The How and Why of Tungsten Carbide Inserts, and a Factory Tour→

Simple Jig Uses Electromagnet For Clean Angle Grinder Cuts

Posted on by

We like it when hacks are literal hack jobs, put together with what’s on hand to do a specific job. This quick and dirty angle grinder circle cutter certainly fills the bill, and makes decent cuts in sheet metal to boot.

The build starts with an unlikely source for parts – an old automotive AC compressor. The one that [Made in Poland] chose to sacrifice was particularly nasty and greasy, but after popping off the pulley, the treasure within was revealed: the large, ring-shaped clutch electromagnet. Liberated from the compressor, the electromagnet was attached to a small frame holding a …read more

Continue reading Simple Jig Uses Electromagnet For Clean Angle Grinder Cuts→

Linear Track Makes Plasma Cuts Neat And Simple

Posted on by

No microcontroller, no display, and not even an LED in sight. That’s how [Made in Poland] decided to roll with this motorized linear plasma cutter, and despite the simplicity it really gets the job done when there’s metal to be cut.

Plasma cutting makes slicing and dicing heavy stock a quick job, but it’s easy to go off course with the torch or to vary the speed and end up with a poor edge. This tool takes the shakes out of the equation with a completely homebrew linear slide fabricated from square tubing. A carriage to hold the plasma cutter …read more

Continue reading Linear Track Makes Plasma Cuts Neat And Simple→

Fail of the Week: The Little Ultrasonic Knife That Couldn’t

Posted on by

We all know the feeling of an idea that sounded great when it was rattling around in our head, only to disappoint when we actually build the thing. It’s a natural consequence of trying new stuff, and when it happens, we salvage what we can and move on, hopefully in wisdom.

The thing that at least semi-defeated [This Old Tony] was an attempt to build an ultrasonic cutter, and it didn’t go well. Not that any blood was shed in the video below, although there seemed like there would be the way [Old Tony] was handling those X-Acto blades. His …read more

Continue reading Fail of the Week: The Little Ultrasonic Knife That Couldn’t→

Cable Cutting Machine Makes Fast Work of a Tedious Job

Posted on by

We’ve all been there: faced with a tedious job that could be knocked out manually with a modest investment of time, we choose instead to overcomplicate the task and build something to do it for us. Such was the impetus behind this automated wire cutter, but in this case the ends justify the means.

That [Edward Carlson] managed to stretch a twenty-minute session with wire cutters and a tape measure into four days of building and tweaking this machine is pretty impressive. The build process was jump-started by modifying an off-the-shelf wire measuring machine, of the kind one finds in …read more

Continue reading Cable Cutting Machine Makes Fast Work of a Tedious Job→

Poor Man’s Laser Scanner Probably Won’t Shoot Your Eye Out, Kid

Posted on by

Yes, laser cutters that come off the slow boat from China are more affordable than ever, and with some tweaks and hacks they can turn out some decent results. But if you just want a laser lightshow that’ll draw boxes on your living room ceiling, this simple X-Y laser scanner might be a good platform to build.

Let’s say right up front that there are more than a few safety issues with [ThingEngineer]’s 3D-printed two-axis scanner. He’s well aware of these potential retina-cooking issues and duly notes that a good pair of laser safety goggles is a must and that …read more

Continue reading Poor Man’s Laser Scanner Probably Won’t Shoot Your Eye Out, Kid→

Custom Workstation Makes Plasma Cutting a Breeze

Posted on by

A plasma cutter is probably top of every metalworker’s short list of dream tools. From freehand curves to long straight cuts, nothing beats a plasma cutter for getting the creative juices flowing. Unfortunately, there’s also the jet of superheated metal blasting through the workpiece to deal with, which is the reason behind this shop-built plasma cutting workstation.

[Regalzack] looks like he had a couple of design goals in mind for his table. A solid work surface isn’t a great idea for plasma cutting, so he designed the top as a grid of replaceable steel slats. Underneath is a hopper to …read more

Continue reading Custom Workstation Makes Plasma Cutting a Breeze→

Toast-Bot Butters For You (Sometimes)

Posted on by

Sometimes — despite impracticality, safety, failure, and general good sense — one has an urge to see a project through for the sake of it. When you’re sick of buttering your toast every morning, you might take a leaf out of Rick Sandc– ahem, [William Osman]’s book and build a toast-bot to take care of the task for you.

[Osman] — opting for nail the overkill quotient — is using a reciprocating saw motor to hold the butter while the toast moves underneath the apparatus on a platform controlled by a linear stepper motor. The frame and mounts for Toast-Bot …read more

Continue reading Toast-Bot Butters For You (Sometimes)→