Category Archives: components

A Guidebook to the World of Counterfeit Parts

Posted on by

We’ve all experienced it: that sinking feeling you get when you’ve powered up your latest circuit and nothing happens. Maybe you made a mistake in your design or you shorted something while soldering. It’s even possible that ESD damaged one of your chips. All of these issues and more are possible, maybe even inevitable, when designing your own hardware.

But what if your design is perfect and your soldering skills beyond reproach? What if your shiny new device is DOA but you’ve done everything right? A fascinating report by [Yahya Tawil] makes the case that it’s increasingly possible that you’ve …read more

Continue reading A Guidebook to the World of Counterfeit Parts→

My Kingdom for a Capacitor

Posted on by

While working on a project recently, I required a capacitor of around 1000 μF and went rummaging through my collection of parts. No luck there. At that point I’d usually go through my collection of junk electronics and computer motherboards, but I had recently gone through and tossed the stuff that had been laying around for as long as I could remember. No matter, I thought. I’ll just head over to RadioShack and…

Now, I have been accused of many things over the years, but “deep” is certainly not one of them. Yet, at this moment I had what could …read more

Continue reading My Kingdom for a Capacitor→

How To Select Just About Any Electronic Part

Posted on by

Sometimes you see an excellent post somewhere else on the web, and then discover that it is one of a series of similarly good posts that you completely missed when they were published. If you are a Hackaday scribe you are left wondering how you managed to pass them by, and then why on earth you didn’t think of writing them yourself.

Such is the case with [Sanket Gupta]’s excellent series for Octopart, of posts titled “How to select a…” and then a class of component. It was the latest, “How to select a voltage regulator” that caught our eye …read more

Continue reading How To Select Just About Any Electronic Part→

Make Your Own Reed Switches

Posted on by

[Lucid Science] shows us how to make some simple reed switches. Reed switches are simple components that detect a magnetic field and can close or open a circuit once detected. While not really a thing of beauty, these DIY reed switches should help you out if you just can’t wait to order some or you fancied trying your hands at making some components from scratch.

Reed switches normally come in very small form factors so if you need something small then this may not be for you however the video does show you on a macro scale the fundamental workings …read more

Continue reading Make Your Own Reed Switches→

Researcher’s tweet sparks Windows 10 telemetry concerns; Here’s what you should know

Posted on by

This handy resource document from Microsoft can help you better understand and control the various connections that elements of Windows 10 makes out to Microsoft services during OS operations.

read more Continue reading Researcher’s tweet sparks Windows 10 telemetry concerns; Here’s what you should know→

Hacker’s Wishlist: What Must-Have Components Let You Build Anything?

Posted on by

We’re putting in a parts order at the end of the week, yet we don’t have a specific project in mind. Trying to wrap your noggin’ around a bill of materials to build anything is tough, but that’s the gist of stocking components for a hackathon.

So we put it to you: what components can’t you live without when you roll your sleeves up for some good old fashioned hardware hacking?

What Can You Build in Two Days?

This parts order is for the badge hacking at this year’s SuperCon. What we saw last year was amazing considering the parts …read more

Continue reading Hacker’s Wishlist: What Must-Have Components Let You Build Anything?→

Portable Workbench Crams An Entire Workspace Into One Box

Posted on by

Making on the go is sometimes required in today’s busy lives, and if you find yourself traveling — say, off to university like [ZSNRA] — then a convenient solution is required. To that end, a portable electronics workbench was built in the shape of a relatively nondescript plywood box.

Plywood and foam-core are the main materials used in building this maker’s bug-out box, with two fir runners along the bottom so the case is not resting on the hinges. Inside, [ZSNRA] has packed a staggering amount of hardware which results in an 11kg suitcase.

Here goes — deep breath now: …read more

Continue reading Portable Workbench Crams An Entire Workspace Into One Box→

Capacitors Made Easy The Hackaday Way

Posted on by

If you build electronic circuits on a regular basis the chances are you will have used capacitors many times. They are a standard component along with the resistor whose values are lifted off the shelf without a second thought. We use them for power supply smoothing and decoupling, DC blocking, timing circuits, and many more applications.

A capacitor though is not simply a blob with two wires emerging from it and a couple of parameters: working voltage and capacitance. There is a huge array of capacitor technologies and materials with different properties. And while almost any capacitor with the right …read more

Continue reading Capacitors Made Easy The Hackaday Way→

The Curse Of The 40673: Zombie Components That Refuse To Die

Posted on by

As a fresh-faced electronic engineering student while the first Gulf War was raging in a far-off desert, I learned my way through the different families of 74 logic at a university in the North of England. 74LS was the one to use, the story went, because it’s quick and doesn’t use much power. At the time, there was an upstart on the scene: 74HC. Now that’s really quick. New. Exotic, even.

Thus an association was formed, when you want a quick logic function then 74HC is the modern one to go for. It could have been a lifelong love …read more

Continue reading The Curse Of The 40673: Zombie Components That Refuse To Die→