Category Archives: accelerometer

Smart Station Runs Entertainment, Is Entertainment

Posted on by

It’s that special time of year—time for the parade of student projects from [Bruce Land]’s embedded microcontroller design course at Cornell. [Timothy], [Dhruv], and [Shaurya] are all into remote sensing and control applications, so they built a smart station that combines audiovisual entertainment with environmental sensing.

As with the other projects in this course, the smart station is built on a PIC32 dev board. It does Bluetooth audio playback via RN-52 module and has a beat-matching light show in the form of a NeoPixel ring mounted atop the 3D-printed enclosure. But those blinkenlights aren’t just there to party. They also …read more

Continue reading Smart Station Runs Entertainment, Is Entertainment→

Spice up your dice with Bluetooth

Posted on by

There’s no shortage of projects that replace your regular board game dice with an electronic version of them, bringing digital features into the real world. [Jean] however goes the other way around and brings the real world into the digital one with his Bluetooth equipped electronic dice.

These dice are built around a Simblee module that houses the Bluetooth LE stack and antenna along with an ARM Cortex-M0 on a single chip. Adding an accelerometer for side detection and a bunch of LEDs to indicate the detected side, [Jean] put it all on a flex PCB wrapped around the battery, …read more

Continue reading Spice up your dice with Bluetooth→

Stop Motion with the Time Glove

Posted on by

What do you get when you put an ultra-bright LED in the palm of a glove, and strobe it controlled by an accelerometer? A Time Control Glove! In creator [MadGyver]’s own words, it’s “just a stroboscope with frequency adjustment” but the effect is where all the fun is.

The Time Control Glove uses the stroboscopic effect, which many of us have seen used in timeless water drop fountains where the strobe rate makes drops appear to change speed, freeze in place, and even change direction. [MadGyver] made the entire assembly portable by putting it into a glove. An on-board accelerometer …read more

Continue reading Stop Motion with the Time Glove→

Quick Hack Helps ALS Patient Communicate

Posted on by

A diagnosis of amyotrophic lateral sclerosis, or ALS, is devastating. Outlier cases like [Stephen Hawking] notwithstanding, most ALS patients die within four years or so of their diagnosis, after having endured the progressive loss of muscle control that robs them of their ability to walk, to swallow, and even to speak.

Rather than see a friend’s father locked in by his ALS, [Ricardo Andere de Mello] decided to help out by building a one-finger interface to a [Hawking]-esque voice synthesizer on the cheap. Working mainly with what hardware he had on hand, his system lets his friend’s dad flick a …read more

Continue reading Quick Hack Helps ALS Patient Communicate→

Hackaday Prize Entry: Hand Tremor Suppression Wearable Device

Posted on by

It is extremely distressing to watch someone succumb to an uncontrollable hand tremor. Simple tasks become frustrating and impossible, and a person previously capable becomes frail and vulnerable. Worse still are the reactions of other people, in whom the nastiest of prejudices can be unleashed. A tremor can be a debilitating physical condition, but it is not one that changes who the person afflicted with it is.

An entry from [Basian Lesi] in this year’s Hackaday Prize aims to tackle hand tremors, and it takes the form of a wearable device that tries to correct the tremors by applying small …read more

Continue reading Hackaday Prize Entry: Hand Tremor Suppression Wearable Device→

Hackaday Prize Entry: Hand Tremor Suppression Wearable Device

Posted on by

It is extremely distressing to watch someone succumb to an uncontrollable hand tremor. Simple tasks become frustrating and impossible, and a person previously capable becomes frail and vulnerable. Worse still are the reactions of other people, in whom the nastiest of prejudices can be unleashed. A tremor can be a debilitating physical condition, but it is not one that changes who the person afflicted with it is.

An entry from [Basian Lesi] in this year’s Hackaday Prize aims to tackle hand tremors, and it takes the form of a wearable device that tries to correct the tremors by applying small …read more

Continue reading Hackaday Prize Entry: Hand Tremor Suppression Wearable Device→

Be the Firebender You Want to See in the World

Posted on by

Always wanted to be a citizen of Fire Nation? Here’s one way to ace the citizenship exam: punch-activated flaming kung fu gauntlets of doom.

As with all the many, many, many flamethrower projects we’ve featured before, we’ve got to say this is just as bad an idea as they are and that you should not build any of them. That said, [Sufficiently Advanced]’s wrist-mounted, dual-wielding flamethrowers are pretty cool. Fueled by butane and containing enough of the right parts for even a minimally talented prosecutor to make federal bomb-making charges stick, the gauntlets each have an Arduino and accelerometer to …read more

Continue reading Be the Firebender You Want to See in the World→

Hackaday Prize Entry: Stroke Rehabilitation Through Biofeedback

Posted on by

Students at Purdue University’s Weldon School of Biomedical Engineering created ExoMIND, an Arduino-powered glove that helps a stroke victim recover by tracking the range of motion the patient experiences.

A set of 7 accelerometers in the fingers, wrist, and forearm track the range of movements the patient is experiencing with that hand. An accelerometer on the back of the hand serving as a reference. Meanwhile, an EMG sensor working with a conductive fabric sleeve to measure muscle activity. The user follows a series of instructions dished out by an interactive software program, allowing the system to test out the patient’s …read more

Continue reading Hackaday Prize Entry: Stroke Rehabilitation Through Biofeedback→

MEMS: The Biggest Word in Small

Posted on by

What’s tiny and on track to be worth $22 billion dollars by 2018? MEMS (Micro Electrical Mechanical Systems). That’s a catch-all phrase for microscopic devices that have moving parts. Usually, the component sizes range from 0.1 mm to 0.001 mm, which is tiny, indeed. There are some researchers working with even smaller components, sometimes referenced as NEMS (Nano Electrical Mechanical Systems).

MEMS have a wide range of applications including ink jet printers, accelerometers, gyroscopes, microphones, pressure sensors, displays, and more. Many of the sensors in a typical cell phone would not be possible without MEMS. There are many ways that …read more

Continue reading MEMS: The Biggest Word in Small→

Hackaday Prize Entry: Analyzing and Controlling Hand Tremors

Posted on by

For the millions of people suffering from Parkinson’s and other causes of hand tremor, there is new hope in the form of [mohammedzeeshan77]’s entry into the Hackaday Prize: a glove that analyzes and controls the tremors.

The glove uses an accelerometer and a pair of flex sensors to determine the position of the hand as it oscillates. A Particle Photon crunches the raw data to come up with the frequency and amplitude of the tremors and uploads it to the cloud for retrieval and analysis by medical staff.

Hand tremors can vary in frequency and severity depending on the cause. …read more

Continue reading Hackaday Prize Entry: Analyzing and Controlling Hand Tremors→