Category Archives: 2016 Hackaday Prize

The Final 10 Entries of the 2016 Hackaday Prize

Posted on by

It has been quite a ride this year, watching entries pour in during the five challenges of the 2016 Hackaday Prize. Our yearly engineering initiative is designed to focus the skill, experience, and creativity of the world’s tinkerers, hackers, designers, and fabricators to build something that matters: things that change lives. The final ten entries, from more than 1,000, exemplify this mission.

For a brief overview of these entries, check out the videos below where we spend about ninty seconds recapping each one, along with some thoughts from the Hackaday Prize judges. These recap videos will be shown during the …read more

Continue reading The Final 10 Entries of the 2016 Hackaday Prize→

After The Prize: Vinduino

Posted on by

In my opinion, the best projects in the Hackaday Prize are the weirdest. Building a computer from sand is an admirable goal, and polar coordinate 3D printers are awesome. These projects obviously have limited utility, and there’s no accounting for taste, anyway. The real proof of how successful a project is, is the degree to which it can be spun out into a product. There’s a social proof in selling something, and last year we introduced the Best Product competition into the Hackaday Prize. The idea is simple: build something other people would want, and you’ll win a residency in …read more

Continue reading After The Prize: Vinduino→

After The Prize: Chipwhisperer

Posted on by

We’re less than a week away from the Hackaday Superconference, where we’ll be announcing the winners of the Hackaday Prize. The Hackaday Prize is a celebration of the greatest hardware the Hackaday community has to offer, and in the past three years we’ve been running this amazing contest, we’ve seen some awesome stuff.

While not every project entered into the Hackaday Prize has gotten off the ground — the lawnmower-powered killacopter of decapitation is still tethered to its test stand — there have been some spectacular projects over the past few years that have already had an incredible impact in …read more

Continue reading After The Prize: Chipwhisperer→

Hackaday Prize Entry: Humidifeyes

Posted on by

Most of the entries in the Hackaday Prize Assistive Technology challenge solve an obvious problem. 3D printed prosthetics, a computer mouse for the mouth, and text to speech systems all have obvious uses. For his Hackaday Prize entry, [spandana] decided on something a little less obvious. He’s going after the scourge of dry eyes with Humidifeyes.

The problem of dry eyes seems a bit esoteric at first glance, but [spandana] is specifically designing this device for people with Steven Johnson’s Syndrome. It’s been mentioned that LASIK patients have dry eyes for months. There is, apparently, an opportunity here.

The mechanics …read more

Continue reading Hackaday Prize Entry: Humidifeyes→

Hackaday Prize Entry: Humidifeyes

Posted on by

Most of the entries in the Hackaday Prize Assistive Technology challenge solve an obvious problem. 3D printed prosthetics, a computer mouse for the mouth, and text to speech systems all have obvious uses. For his Hackaday Prize entry, [spandana] decided on something a little less obvious. He’s going after the scourge of dry eyes with Humidifeyes.

The problem of dry eyes seems a bit esoteric at first glance, but [spandana] is specifically designing this device for people with Steven Johnson’s Syndrome. It’s been mentioned that LASIK patients have dry eyes for months. There is, apparently, an opportunity here.

The mechanics …read more

Continue reading Hackaday Prize Entry: Humidifeyes→

Hackaday Prize Entry: Bilateral Brain Stimulator

Posted on by

In 1987, an American psychologist found voluntary eye movements reduced the intensity of negative thoughts. This is the basis of EMDR, or Eye Movement and Reprocessing Desensibilization, and if it sounds too oogie-boogie to be real, I assure you there are even oogier and boogier techniques in psychology that actually work.

[David]’s entry to the Hackaday Prize is a device that helps psychologists apply EMDR for the treatment of post-traumatic stress disorders. To do this, the psychologist asks the patient to describe a traumatic incident while the patient makes eye movement. According to the literature, this facilitates the connection between …read more

Continue reading Hackaday Prize Entry: Bilateral Brain Stimulator→

Hackaday Prize Entry: Smart Bed Lighting

Posted on by

[Scott] is building motion-activated lights for under the bed for his Hackaday Prize entry. Admittedly, there are fancier projects for the ‘Assistive Technology’ portion of the prize, but this project helps anyone who would otherwise stumble around in the dark. And as [Scott] jokes, that includes a number of underserved demographics including accident prone people, children afraid of the dark, drunks, and, “drunk accident prone children who are afraid of the dark”.

Although the idea of mounting LEDs under a bed is simple, the devil is in the details. [Scott] is using a PIR sensor to turn these hidden lights …read more

Continue reading Hackaday Prize Entry: Smart Bed Lighting→

Hackaday Prize Entry: Smart Bed Lighting

Posted on by

[Scott] is building motion-activated lights for under the bed for his Hackaday Prize entry. Admittedly, there are fancier projects for the ‘Assistive Technology’ portion of the prize, but this project helps anyone who would otherwise stumble around in the dark. And as [Scott] jokes, that includes a number of underserved demographics including accident prone people, children afraid of the dark, drunks, and, “drunk accident prone children who are afraid of the dark”.

Although the idea of mounting LEDs under a bed is simple, the devil is in the details. [Scott] is using a PIR sensor to turn these hidden lights …read more

Continue reading Hackaday Prize Entry: Smart Bed Lighting→

Hackaday Prize Entry: A Cluster Of Exoskeletons

Posted on by

The current trend of 3D printed prosthetic hands have one rather large drawback: you can’t use them if you already have two hands. This might seem like a glib objection, but one of last week’s Hackaday Prize posts pointed this out rather well – sometimes a meat machine needs mechanical assistance.

BEOWULF, [Chad Paik]’s entry for the Hackaday Prize, is the answer to this problem. It’s a mechanical exoskeleton for grip enhancement, stroke rehabilitation, and anyone else that doesn’t have the strength they need to get through the day.

This project solves the problem of weak arm strength through – …read more

Continue reading Hackaday Prize Entry: A Cluster Of Exoskeletons→

Hackaday Prize Entry: A Big, Inexpensive 3D Printer

Posted on by

When it comes to 3D printers, most machines you’ll see are pretty small. The Ultimaker, Prusa, Lulzbot, and the Rostock Max are desktop devices. While they have entirely usable build volumes, you’re not printing furniture with these machines. Yes, large format 3D printers exist, like the SeeMeCNC Part Daddy (they’ll build you one for ~$90,000, IIRC), a house printer that uses concrete, and a number of very large printers from various other manufacturers with very high price tags.

There is no 3D printer designed to print large objects without spending tens of thousands of dollars on a machine. That’s the …read more

Continue reading Hackaday Prize Entry: A Big, Inexpensive 3D Printer→