Author Archives: John Baichtal

Tiniest Control Board Fits Inside an N-Gauge Model Train

Posted on by

[kodera2t] discovered the VL53L0X Time of Flight sensor and thought it would make a great way to control the operation of a model train without touching it.

The sensor was small enough for an N-gauge train, which translates to 1:148 scale or about 9mm from rail to rail. His idea was to build a tiny control board that could fit inside the locomotive: 10mm by 40mm. His board consists of the ToF sensor, an ATMega328P-MMH, USB-serial, and a Texas Instruments DRV8830 motor driver. he powers the board via the 6V running through the track.

Right now [kodera2t]’s using the ToF …read more

Continue reading Tiniest Control Board Fits Inside an N-Gauge Model Train→

Ambitious ATtiny85 Board Tests a Beginner’s Skills

Posted on by

[Chris O’Riley] has been playing around with Arduinos for around a year, and decided he wanted a breadboardable ATtiny85 in order to prototype using the actual controller that would be used in the final project. He wants to use it to interface with a Bosch BMP280 pressure sensor, but for now it stands alone.

It’s a simple board with the Tiny85, 3.3 V and 5 V regulators, a power LED, as well as the usual resistor sand caps. The double-sided PCB [Chris] milled himself — he’s an illustrator and photographer by day, so it’s no surprise the board turned out …read more

Continue reading Ambitious ATtiny85 Board Tests a Beginner’s Skills→

Hackaday Prize Entry: Modular Circuits with SnapBloks

Posted on by

[Ekawahyu Susilo]’s twist on the modular circuit kit, SnapBloks helps you create circuits by stacking components on top of each other with the help of three magnetic contacts that not only keep the modules stuck together but also deliver power, ground, and data to each part.

[Ekawahyu] envisioned it as a prototyping kit, used to whip together an idea without a lot of hassle. It could also be an educational aid, used to teach Arduino coding while skipping the confusing tangle of wiring. You can stack a sound module on top of a power module to make a buzzer, or …read more

Continue reading Hackaday Prize Entry: Modular Circuits with SnapBloks→

Hackaday Prize Entry: Modular Circuits with SnapBloks

Posted on by

[Ekawahyu Susilo]’s twist on the modular circuit kit, SnapBloks helps you create circuits by stacking components on top of each other with the help of three magnetic contacts that not only keep the modules stuck together but also deliver power, ground, and data to each part.

[Ekawahyu] envisioned it as a prototyping kit, used to whip together an idea without a lot of hassle. It could also be an educational aid, used to teach Arduino coding while skipping the confusing tangle of wiring. You can stack a sound module on top of a power module to make a buzzer, or …read more

Continue reading Hackaday Prize Entry: Modular Circuits with SnapBloks→

Dirty Now Does Cables

Posted on by

PCB makers Dirty made a name for themselves in the prototype PCB biz, with a convenient web form and numerous options for PCB color, thickness, layers, silk screening, and so on. Now they’ve branched out into custom cabling with Dirty Cables.

You can design it yourself by dragging wires and connectors out of a sidebar and arranging them on a workspace, deciding which wire goes to what pin of the connector. Your choices for wires include various gauges and ribbon configurations. You choose a color (they have eleven) select connectors and drag those out too–choose from 17 cable-to-cable and cable-to-board …read more

Continue reading Dirty Now Does Cables→

3D-Printed Rover Rolls Light and Looks Right

Posted on by

[Rick Winscott]’s RO-V Remotely Operated Vehicle instructable shows you how to make this cool-looking and capable robot. The rover, a 1/10th scale truggy, sports a chassis printed in silver and black PLA. It’s got a wireless router mounted on the back, and a webcam in a 2-servo gimbal up front. [Rick] made his own steering rack and pinion out of 3D printed parts and brass M3-threaded rods which he tapped himself.

The simplified drive system nixes the front, rear, and center differentials, thereby saving [Rick] on printing time, complexity, and weight — he was able to include a second 4000 …read more

Continue reading 3D-Printed Rover Rolls Light and Looks Right→

Hackaday Prize Entry: Elephant AI

Posted on by

[Neik K. Sheridan]’s Automated Elephant Detection System was a semi-finalist in last year’s Hackaday Prize. Encouraged by his close finish, [Neil] is back at it with a refreshed and updated Elephant AI project.

The purpose of Elephant AI is to help humans and elephants coexist by eliminating contact between the two species. What this amounts to is an AI that can herd elephants. For this year’s project, [Neil] did away with the RF communications and village base stations in favor of 4G/3G-equipped, autonomous sentries equipped with Raspberry Pi computers with Go Pro cameras.

The main initiative of the project involves …read more

Continue reading Hackaday Prize Entry: Elephant AI→

Writing a New Game for the Game Boy Color

Posted on by

If you’re bored with the Game Boy Color’s offerings, it’s understandable: it’s been around for nearly 20 years, and doesn’t get a lot of new releases these days. [Antonio Niño Díaz] spent over a year coding a game for the GBC: µCity, a Sims City style game. He designed the graphics and even wrote his own music.

[Antonio] did all the programming in Assembly Language, creating modules for managing traffic and the power grid, building creation and destruction, as well as disaster simulations. He has extensive notes in his GitHub page detailing each module and describing how it all works …read more

Continue reading Writing a New Game for the Game Boy Color→

Making a Wearable NFC Bus Pass

Posted on by

[Stephen Cognetta] is trying to get the total number of things he owns down below 115, and he’s always looking for ways to streamline his life.

Toward this goal he dissolved his SF Transit Clipper Card in acetone to get at the NFC tag embedded inside. The tag consists of a tiny chip attached to an antenna the size of the card itself. It took about three days (video below the break) for the layers to separate and [Stephen] was able to extricate the tag.

He ended up trying a few different ways of storing the delicate chip and antenna, …read more

Continue reading Making a Wearable NFC Bus Pass→