Author Archives: John Baichtal

Monster Mindstorms Delta Bot Delicately Picks Candy

Posted on by

A group of embedded developers from Sioux Embedded Systems in Eindhoven, the Netherlands, wanted to get experience working on Microsoft .Net. To make it fun they made it their project to produce a LEGO train with visitors at LEGO World, the official LEGO convention in Denmark. The team developed an application in C# to fully automate the train, with Mindstorms NXT and EV3 bricks as well as LEGO Power Functions motors controlling everything.

The train project carries a simple premise: the visitor chooses one of four colors, and the train goes and picks up a piece of simulated candy with …read more

Continue reading Monster Mindstorms Delta Bot Delicately Picks Candy→

Hackaday Prize Entry: Open Source Patient Monitor

Posted on by

Vital sign monitors are usually found in developed countries; they just cost too much for less affluent communities to afford. The HealthyPi project aims to change that by developing an inexpensive but accurate monitor using a Raspberry Pi, a custom hat studded with sensors, and a touch screen. The resulting monitor could be used by medical professionals as well as students and private researchers.

[Ashwin K Whitchurch] and his team created HealthyPi, a Raspberry Pi hat that includes an AFE4490 chip serving as the pulse oximeter front end, an analog to digital converter that interprets the ECG and respiration data, …read more

Continue reading Hackaday Prize Entry: Open Source Patient Monitor→

Using a Decade Counter to Make LEDs Flash

Posted on by

[Andrea De Napoli] created a LED display consisting of a half-dozen LEDs connected to the inverted signals of a CD4017 decade counter, giving the effect that a dark LED is running back and forth. The CD4017 works by activating 10 outputs, one at a time, as controlled by a clock signal sent to pin 14.

The first and last LEDs are lit by outputs 0 and 5 with the help of a PNP transistor and a 12K resistor. The middle four LEDs are switched by two outputs each and go dark when one of them goes high. [Andrea] really delves …read more

Continue reading Using a Decade Counter to Make LEDs Flash→

Hackaday Prize Entry: Hydroponic Garden Control

Posted on by

[Todd Christell] grows tomatoes in hydroponic buckets in his backyard, and recently he suffered a crop loss when a mechanical timer failed to dispense the nutrient flow as directed. He decided the solution was to add a sensor array to his home network.

[Todd]’s home automation setup runs on a Raspberry Pi loaded with Jessie OS and Node-Red, with Mosquitto as his MQTT message broker. With a sensor network in place, [Todd] would get updates on his phone alerting him if there was a problem with the pumps or if the nutrient bath was getting too low.

The proposed hydroponic …read more

Continue reading Hackaday Prize Entry: Hydroponic Garden Control→

Hackaday Prize Entry: Hydroponic Garden Control

Posted on by

[Todd Christell] grows tomatoes in hydroponic buckets in his backyard, and recently he suffered a crop loss when a mechanical timer failed to dispense the nutrient flow as directed. He decided the solution was to add a sensor array to his home network.

[Todd]’s home automation setup runs on a Raspberry Pi loaded with Jessie OS and Node-Red, with Mosquitto as his MQTT message broker. With a sensor network in place, [Todd] would get updates on his phone alerting him if there was a problem with the pumps or if the nutrient bath was getting too low.

The proposed hydroponic …read more

Continue reading Hackaday Prize Entry: Hydroponic Garden Control→

Electric Skateboard Rocks the Giant LEGO

Posted on by

[James Bruton] built an electric skateboard out of oversized LEGO bricks he printed himself, and equipped the board with an excellent re-creation of a classic motor.

He began by downloading brick, gear, and pulley designs from Thingiverse and printing them up five times their normal size, taking 600 hours. The deck consists of 8M Technic bricks lengthwise and 4M bricks crosswise, with plates covering top. There’s even a monster 5×6 plate that’s clearly courtesy of a parametric brick design because you won’t find that configuration among LEGO’s official parts.

The coolest part of the project is probably [James]’ re-creation of …read more

Continue reading Electric Skateboard Rocks the Giant LEGO→

Hackaday Prize Entry: Disaster Recovery WiFi

Posted on by

The Meshpoint project originated in Croatia during the 2015 Syrian refugee crisis, when [Valent Turkovic] and other volunteers noticed that first responders, including NGOs like Greenpeace and the Red Cross, often struggled to set up communications in the field. They came to the conclusion that they couldn’t rely on the normal communications infrastructure because it was either damaged or overloaded.

The solution is a net of open source, autonomous WiFi mesh routers, scalable from a single team to serving thousands of people. Responders who won’t have time for a difficult login process, should find setup as easy as signing in …read more

Continue reading Hackaday Prize Entry: Disaster Recovery WiFi→

Rovers to the Rescue: Robot Missions Tackles Trash

Posted on by

Everyone knows plastic trash is a problem with junk filling up landfills and scattering beaches. It’s worse because rather than dissolving completely, plastic breaks down into smaller chunks of plastic, small enough to be ingested by birds and fish, loading them up with indigestible gutfill. Natural disasters compound the trash problem; debris from Japan’s 2011 tsunami washed ashore on Vancouver Island in the months that followed.

Erin Kennedy was walking along Toronto Island beach and noticed the line of plastic trash that extended as far as the eye could see. As an open source robot builder, her first inclination was …read more

Continue reading Rovers to the Rescue: Robot Missions Tackles Trash→

Best Product Entry: Emulating Memory

Posted on by

For this year’s Hackaday Prize, we’re giving everyone the opportunity to be a hardware startup. This is the Best Product portion of the Hackaday Prize, a contest that will award $30,000 and a residency in our Design Lab to the best hardware project that is also a product.

Imagine all the memory chips in all the landfills in the world. What if we could easily recover those hosed motherboards and swap out ROM files on malware-damaged chips. That’s the promise of [Blecky]’s EEPROM/Flash Emulator project on Hackaday.io. This project seeks to be the ultimate memory interface, emulating SPI-interface EEPROM or …read more

Continue reading Best Product Entry: Emulating Memory→

Hackaday Prize Entry: Health-Monitoring Flexible Smartwatch

Posted on by

[Nick Ames]’s Flexible Smartwatch project aims to create an Open Source smartwatch made out of a flexible, capacitive e-ink touchscreen that uses the whole surface of the band. This wraparound smartwatch displays information from the on-board pulse and blood oximetry sensor as well as the accelerometer and magnetometer, giving you a clear idea of how stressed you are about your upcoming meeting.

The display [Nick] went with is called an electrophoretic display (EPD). It’s 400×200-pixels at 115ppi with a 4″ diagonal, and can bend around a wrist. It can draw shapes in 16 shades of gray with a refresh time …read more

Continue reading Hackaday Prize Entry: Health-Monitoring Flexible Smartwatch→