Author Archives: Gerrit Coetzee

Repaired Manned Multicopter Flies without Horrifying Crash

Posted on by

[amazingdiyprojects] has been making lots of test flights in his crazy eight propeller gasoline powered danger bucket.

We last covered the project when he had, unfortunately, wrecked the thing in a remote-controlled test flight.  He later discovered that the motor’s crankshaft bearings had, well, exploded. The resulting shrapnel destroyed the motor and crashed the drone. He described this failure mode as “concerning”.

Also concerning is the act of stepping into the seat once all the propellers are started up. He tags this as “watch your step or die”. Regardless, he also describes flying in the thing as so incredibly fun …read more

Continue reading Repaired Manned Multicopter Flies without Horrifying Crash→

Beware Of Tall Grass: Pokemon Go on the Gameboy Pocket

Posted on by

[Pepijn de Vos] was excited to interact with the world’s most popular augmented reality pedometer, Pokemon Go, and was extremely disappointed to find that his Blackberry couldn’t run it. Still, as far as he could tell from behind his wall of obsolete technology, Pokemon Go is all about walking distractedly, being suspicious, and occasionally catching a Pokemon. That should be possible.

Not a stranger to hacking Pokemon on the Gameboy, [Pepijn] put together a plan. Using his TCPoke module, he took it a step further. Rather than just emulating the original gameboy trade signals over the internet, he hacked a …read more

Continue reading Beware Of Tall Grass: Pokemon Go on the Gameboy Pocket→

Zizzy The Personal Robot Uses 3D Printed Artificial Muscles Instead of Hobby Servos

Posted on by

Zizzy is a personal robot designed to help those with limited mobility. Rather than being assisted by a nightmare creature, Zizzy would offer a more appealing and friendly option.

The coolest part about Zizzy is the 3D printable pneumatic artificial muscles. Project creator, [Michael Roybal] said it took over a year of development to arrive at the design.

The muscles are hollow bellows printed out of Ninjaflex with carefully calibrated settings. A lot of work must have gone into the design to make sure that they were printable. After printing the muscles are painted with a mixture of fabric glue and MEK solvent. If all …read more

Continue reading Zizzy The Personal Robot Uses 3D Printed Artificial Muscles Instead of Hobby Servos→

Dual Axis Solar Tracker with Online Energy Monitor

Posted on by

[Bruce Helsen] built this dual axis solar tracker as one of his final projects for school.

As can be experimentally verified in a very short timeframe, the sun moves across the sky. This is a particularly troublesome behavior for solar panels, which work best when the sun shines directly on them. Engineers soon realized that abstracting the sun away only works in physics class, and moved to the second best idea of tracking sun by moving the panel. Surprisingly, for larger installations the cost of adding tracking (and its maintenance) isn’t worth the gains, but for smaller, and especially urban, installations like …read more

Continue reading Dual Axis Solar Tracker with Online Energy Monitor→

VertiGo Robot Drives Up Walls

Posted on by

This collaboration between ETH and the Disney empire’s research arm is a ultra-light robot that can roll across horizontal surfaces and also transition and climb walls.

The robot has four wheels with one steerable set, but its secret sauce is the two propellers gimbaled on its back. Using these propellers it can move itself across the ground, but also, when approaching a wall, provide enough thrust to overcome the gravity vector.

Naturally, the lighter the robot, the less force will be needed to keep it on the wall. That’s why the frame is made from carbon fiber corrugated sandwich panels. …read more

Continue reading VertiGo Robot Drives Up Walls→

Super In-Depth $15 Curve Tracer Project

Posted on by

[Jason Jones] has always wanted a curve tracer for his home shop. When he was starting out in electronics he fell in love with a machine called a Huntron Tracker 2000. This machine would feed a sine wave into a circuit on one side and plot a XY graph on the other.

[Jason] figured that with a modern microcontroller such a device could be build simply and cheaply for around $15 dollars. With that requirement in mind he set out to build it. He selected a PIC24F16KM202 for the brain and got to work.

The write-up is really great. It’s …read more

Continue reading Super In-Depth $15 Curve Tracer Project→

One Man Spends 53 Years And Builds A Cathedral

Posted on by

Is it a hack? We think it’s definitely a hack. It’s just a hack that’s so grand and audacious it’s hard to even think of it as a hack. [Don Justo Martinez] single-handedly (aside from the help of an occasional nephew, which doesn’t count) built a Cathedral over 53 years in Madrid Spain.

Born in 1925, [Don Justo] found himself dying of tuberculosis soon after leaving a life of farming and becoming a Benedictine monk. He became so ill he was forced to leave his order and prayed for healing. He promised that he would erect a church in the name of the Lady …read more

Continue reading One Man Spends 53 Years And Builds A Cathedral→

JumpRoaCH is Kind Of Cute, Kind Of Creepy

Posted on by

There’s a theory that the fear of scurrying things is genetic. Likewise, a similar theory arose about the tendency for humans to find helpless things cute. After all, our useless babies do best in a pest free environment. This all could explain why we found this robotic roach to be both a little cute and a little creepy.

The university sponsored project, JumpRoaCH, is a collaboration between South Korea’s SNU Biorobotics Lab and Berkeley’s Biomimetic Millisystems Lab. Imitating insects has been a popular avenue for robotic research, and often results in very interesting experiments.

This robot looks like a ladybug …read more

Continue reading JumpRoaCH is Kind Of Cute, Kind Of Creepy→

Metal Casting With Single Shelled PLA Masters

Posted on by

[3DTOPO] does a lot of metal casting (video link, embedded below). That’s obvious by the full and appropriate set of safety gear, a rarity on YouTube.

They had all the equipment to do it the normal way: craft or CNC out a master, produce a drag and a copy, make any necessary cores, and finally; pour the mold. This is a long and tedious process. It has a high rate of error, and there is a parting line.

Another set of methods are the lost ones. With these methods the master is produced out of a material like foam or wax. The …read more

Continue reading Metal Casting With Single Shelled PLA Masters→

Learn Resin Casting Techniques: Cold Casting

Posted on by

Sometimes we need the look, feel, and weight of a metal part in a project, but not the metal itself. Maybe you’re going for that retro look. Maybe you’re restoring an old radio and you have one brass piece but not another. It’s possible to get a very metal like part without all of the expense and heat required in casting or the long hours in the metal fabrication shop.

Before investing in the materials for cold casting, it’s best to have practical expectations. A cold cast part will not take a high polish very well, but for brushed and …read more

Continue reading Learn Resin Casting Techniques: Cold Casting→