Author Archives: Brian Benchoff

BOM Cost Optimization and Tindie Badge Engineering

Posted on by

For the last few months, I’ve been up to my neck in electronic conference badges. This year, I created the single most desirable badge at DEF CON. I also built a few Tindie badges, and right now I’m working on the logistics behind the Hackaday SuperConference badge. Sit tight on that last one — we’re doing something really, really special next month.

Most badge projects are one-off production runs. This is to be expected from a piece of hardware that’s only meant to be distributed at a single event. The Tindie badge is different. It’s now a thing, and …read more

Continue reading BOM Cost Optimization and Tindie Badge Engineering→

Adding Screws To A DIY CNC Machine

Posted on by

When it comes to CNC machines, your SureFine has screws on its axes, and the Bodgeport does too. A shopbot has an amazing rack gear system, but when you start to dig into the small CNC routers available for under $2,000, you’ll only find belts moving a router back and forth. This isn’t to say belts won’t work — you can create a fine CNC machine with bits of rubber. However, belts stretch, they wear out, and if you want more precision screws and racks are the way to go.

The WorkBee CNC machine is the first desktop CNC router …read more

Continue reading Adding Screws To A DIY CNC Machine→

SiFive Announces RISC-V SoC

Posted on by

Athe the Linley Processor Conference today, SiFive, the semiconductor company building chips around the Open RISC-V instruction set has announced the availability of a quadcore processor that runs Linux. We’ve seen RISC-V implementations before, and SiFive has already released silicon-based on the RISC-V ISA. These implementations are rather small, though, and this is the first implementation designed for more than simple embedded devices.

This announcement introduces the SiFive U54-MC Coreplex, a true System on Chip that includes four 64-bit CPUs running at 1.5 GHz. This SoC is built with TSMC’s 28 nm process, and fits on a die about 30 …read more

Continue reading SiFive Announces RISC-V SoC→

Friday Hack Chat: Hardware Games

Posted on by

For this week’s Hack Chat, we’re talking all about hardware games. What’s a hardware game? Anything where we use hardware, electronics, or code for user interaction. This is a vast, vast topic and there are a lot of tips and tricks that go into making a unified experience that’s both valuable and can stand up to the rigors of any crowd.

Our guest for this week’s Hack Chat will be [Phoenix Perry], lecturer, CS PhD researcher, game company owner, artist, programmer, game designer, and activist. For every human-computer computer interaction to teaching computer science, [Phoenix] has had her hand in …read more

Continue reading Friday Hack Chat: Hardware Games→

Open Hardware Summit This Thursday

Posted on by

This Thursday, Hackaday and Tindie are going to be rolling into Denver to attend the 2017 Open Hardware Summit.

What’s the big draw for the Open Hardware Summit? The attendees, of course. These are the people who make all the cool bits and bobs in Open Hardware. [Prusa] will be there, Seeed will be there, OSH Park and OSH Stencils will be there (yeah, they’re different companies), BeagleBoard will be there, and Great Scott Gadgets will be there. This is the place you want to be if you want to meet the heroes of Open Hardware.

Of special interest at …read more

Continue reading Open Hardware Summit This Thursday→

This Synth Is Okay

Posted on by

While this 3D printed synthesizer might just be okay, we’re going to say it’s better than that. Why? [oskitone] did something with a 555 timer.

The Okay synth from [oskitone] uses a completely 3D printed enclosure. Even the keys are printed. Underneath these keys is a small PCB loaded up with tact switches and small potentiometers. This board runs to another board loaded up with a 555 timer and a CD4040 frequency divider. This, in turn, goes into an LM386 amplifier. It’s more or less the simplest synth you can make.

If this synth looks familiar, you’re right. A few …read more

Continue reading This Synth Is Okay→

Teaching Electronics With A Breadboard Badge

Posted on by

Over the last year, the production of homebrew electronic badges for conferences has exploded. This is badgelife — the creation of custom hardware, a trial by fire of manufacturing, and a mountain of blinky LEDs rendered in electronic conference badges. It’s the demoscene for hardware, and all the cool kids are getting into it.

At this year’s World Maker Faire in New York, there was a brand new badge given out by the folks at Consumer Reports. This badge goes far beyond simple swag, and if you take a really good look at it, you’ll see magic rendered in breadboards …read more

Continue reading Teaching Electronics With A Breadboard Badge→

Hackaday Links: October 1, 2017

Posted on by

Remember when you first saw a USB port in a standard wall outlet? It was a really great idea at the time, but how’s that 500mA charge holding up now? Fresh from a random press release, here’s a USB 3.0 wall outlet, with USB A and C ports. 5A @ 5V. Future proof for at least several years, I guess.

This is what you call ‘pucker factor’. An Air France A380 traveling from CDG to LAX suffered an uncontained engine failure somewhere over Greenland. Everyone on board is fine, except for the fact they had to spend the night in …read more

Continue reading Hackaday Links: October 1, 2017→

Enresoning An iPhone 8 Ring

Posted on by

The iPhone 8 was just released last week, and that means some people were standing in line in front of an Apple store for hours waiting to get their hands on the latest and greatest glowing rectangle. [Patrick Adair] had a better idea: he would stand in front of an Apple store for four hours, then do something productive with his new smartphone. With the help of a waterjet, some resin, a lathe, and some very fine grades of sandpaper, he created the Apple Ring.

Setting aside the whole process of actually acquiring an iPhone 8 on launch day, the …read more

Continue reading Enresoning An iPhone 8 Ring→

Friday Hack Chat: All About LED Design

Posted on by

There are three great enabling technologies of the last twenty years. The first is lithium batteries that hold a lot of juice. Quadcopters wouldn’t exist without them, and the Tesla Model S wouldn’t either. The second is crazy powerful brushless motors. Here, again, quads wouldn’t exist without them, but we’re also getting smaller, torquier, and more powerful motion platforms.

The third great enabling technology in recent memory is LEDs. Remember when the PlayStation 2 came out, and everyone was amazed by the blue LED? That blue LED won a Nobel Prize. Now, we have LED light bulbs, LEDs in any …read more

Continue reading Friday Hack Chat: All About LED Design→