Author Archives: Brian Benchoff

Ben Heck Can Program The Smallest Microcontroller

Posted on by

Microcontrollers are small, no one is arguing that. On a silicon wafer the size of a grain of rice, you can connect a GPS tracker to the Internet. Put that in a package, and you can put the Internet of Things into something the size of a postage stamp. There’s one microcontroller that’s smaller than all the others. It’s the ATtiny10, and its brethren the ATtiny4, 5, and 9. It comes in an SOT-23-6 package, a size that’s more often seen in packages for single transistors. It’s not very capable, but it is very small. It’s also very weird, with …read more

Continue reading Ben Heck Can Program The Smallest Microcontroller→

Brush With The Power Of 3D Printing

Posted on by

When it comes to 3D printing, functional prints are still few and far between. Sure, you can print a mount for anything, a Raspberry Pi case, but there are few prints out there that are truly useful, and even fewer that are useful while taking advantage of the specific capabilities of a 3D printer.

The Bouldering Brush from Turbo SunShine turns this observation on its head. It’s a useful device for getting the grime, sand, and sweat out of handholds while rock climbing, and it’s entirely 3D printed using manufacturing techniques only 3D printers can do.

If you’re thinking you’ve …read more

Continue reading Brush With The Power Of 3D Printing→

The Printed Solution To A Handful Of Resistors

Posted on by

Resistors are an odd bunch. Why would you have 1.0 Ω resistors, then a 1.1 Ω resistor, but there’s no resistors in between 4.7 Ω and 5.6 Ω? This is a question that has been asked for decades, but the answer is actually quite simple. Resistors are manufactured according to their tolerance, not their value. By putting twenty four steps on a logarithmic scale, you get values that, when you take into account the tolerance of each resistor, covers all possible values. Need a 5.0 Ω resistor? Take a meter to some 4.7 Ω and 5.6 Ω resistors. You’ll find …read more

Continue reading The Printed Solution To A Handful Of Resistors→

New Part Day: SMD Batteries

Posted on by

Here’s a tip for all you retrocomputing enthusiasts or even anyone with an old computer in the garage. Go remove the battery. Yes, that old mid-90s desktop has a battery inside for the real-time clock, and it’s a ticking time bomb. Batteries leak, and they’ll spew goo all over the circuit board, irreparably damaging your piece of electronic nostalgia. This goes for all electronics, too: that badge collection is going to be a pile of broken fiberglass in a decade. Remove your batteries now.

While lithium cells soldered to a motherboard will leak, now there might be a new technology …read more

Continue reading New Part Day: SMD Batteries→

3D Printing An Entire Rocket

Posted on by

If you’re ever flying into LAX and have the left side window seat, just a few minutes before landing, look out the window. You’ll see a small airport just below you and what appears at first glance to be a smokestack. That’s not a smokestack, though: that’s a rocket, and that’s where SpaceX is building all their rockets. Already SpaceX has revolutionized the aerospace industry, but just down the street there’s another company that’s pushing the manufacturing of rocket engines a bit further. Relativity Space is building rockets. They’re 3D printing rocket engines, and they’re designing what could be the …read more

Continue reading 3D Printing An Entire Rocket→

Hackaday Links: CES is Over

Posted on by

CES is over, and once again we have proof technology does not improve our lives. Here’s the takeaway from the @internetofshit. There’s a garbage can where you can drop your DNA sample. This is obviously not a Bay Area startup, because they just leave DNA samples on the sidewalk there. The ‘smart cooler’ market is heating up (literally) with a cooler that’s also a grill. Someone duct taped an air filter to a roomba, so your air filter can go to where all the dirty air is in your house. Internet of Rubik’s Cubes. The world’s first autonomous shower made …read more

Continue reading Hackaday Links: CES is Over→

Towards Low Cost Biomedical Imaging

Posted on by

Medical imaging is one of the very best applications of technology — it allows us to peer inside of the human body without actually performing surgery. It’s non-destructive testing to the extreme, and one of the more interesting projects we’ve seen over the past year uses AC currents and an infinite grid of resistors to image the inside of a living organism. It’s called Spectra and it is the brainchild of [Jean Rintoul]. Her talk at the Hackaday Superconference is all about low cost and open source biomedical imaging.

We’ve seen some interesting medical imaging hacks in the Hackaday Prize …read more

Continue reading Towards Low Cost Biomedical Imaging→

Improving Router-Based Dev Boards With The Onion Omega2 Pro

Posted on by

Before we had Raspberry Pis and Beaglebones, the art of putting a Linux system in a small, portable project was limited to router hacking. The venerable WRT54G controlled Internet-connected robots with a careful application of a Unix-ey firmware. Now, things are different but there’s still a need for a cheap, portable Linux system that’s just good enough to get the job done. Now, there’s an upgrade to the board that follows in the footsteps of that router hacking The Onion Omega2 Pro is up on Crowd Supply, and it’s got more buttons, more switches, and it’s still smaller than a …read more

Continue reading Improving Router-Based Dev Boards With The Onion Omega2 Pro→

2018: As The Hardware World Turns

Posted on by

2018 is almost over, and we have another year in the dataset: an improbable number of celebrities died in 2016. The stock market is down, and everyone thinks a crash is coming. Journalists are being killed around the world. Fidget spinners aren’t cool anymore. Fortnite. Trade wars.

But not everything is terrible: Makerbot released a new printer and oddly no one complained. It was just accepted that it was an overpriced pile of suck. Elon Musk is having a great year, press and Joe Rogan notwithstanding, by launching a record number of rockets and shipping a record number of cars, …read more

Continue reading 2018: As The Hardware World Turns→

Hackaday Links: Christmas Eve Eve, 2018

Posted on by

The entirety of Silicon Valley is predicated on the ability to ‘move fast and break laws’. Have an idea for a scooter startup? No problem, just throw a bunch of scooters on the curb, littering and e-waste laws be damned. Earlier this year, Swarm Technologies launched four rogue satellites on an Indian rocket. All commercial satellite launches by US companies are regulated by the FCC, and Swarm just decided not to tell the FCC. This was the first unauthorized satellite launch ever. Now, Swarm has been fined $900k. Now that we know the cost of launching unauthorized satellites, so if …read more

Continue reading Hackaday Links: Christmas Eve Eve, 2018→