Author Archives: Brian Benchoff

Hackaday Prize Entry: Polling The Polling Places

Posted on by

A decade and a half ago, a developer testified that he was contracted to make code that would swing an election using electronic voting machines. In this year’s presidential primaries, exit polling significantly differed from official results, but only in precincts using unverifiable electronic voting machines. A democracy can only exist if the integrity of the voting process can be assured, and there is no international electoral oversight committee that would verify the elections in every precinct of the United States.

Your vote may not count, but that doesn’t mean you should wait for hours to cast it. This Hackaday …read more

Continue reading Hackaday Prize Entry: Polling The Polling Places→

Be A Part Of The Best Hardware Conference Ever

Posted on by

The 2016 Hackaday SuperConference is on. If you haven’t had time to submit your proposal for a talk or workshop at the world’s greatest conference for hardware, now is the time to do it. We’re looking for everything – war stories from deep in the trenches or next to the pick and place, the problem of having your board house 5,000 miles from your lab, and that time you accidentally discovered P=NP in the firmware of a reflow toaster oven.

The Hackaday Supercon will be in Pasadena, California on November 5th and 6th, and will be the host of hundreds …read more

Continue reading Be A Part Of The Best Hardware Conference Ever→

Google Unveils Their Experimental Plan For Wireless Broadband Service

Posted on by

Two years ago, the FCC, with interested parties in Microsoft, Google, and many startups, created the Citizens Band Radio Service (CBRS), a rule that would open up the 3550-3650 MHz band  to anyone, or any company, to create their own wireless backbone between WiFi access points. It is the wireless solution to the last-mile problem, and last year the FCC enthusiastically endorsed the creation of the CBRS.

In a recently released FCC filing, Google has announced their experimental protocol for testing the new CBRS. This isn’t fast Internet to a lamp pole on the corner of the street yet, but …read more

Continue reading Google Unveils Their Experimental Plan For Wireless Broadband Service→

Hackaday Prize Entry: A Cheap STM32 Dev Board

Posted on by

Dev boards sporting a powerful ARM microcontroller are the future, despite what a gaggle of Arduino clones from China will tell you. Being the future doesn’t mean there’s not plenty of these boards around, though. The LeafLabs Maple has been around since 2009, and is a fine board if you want all that Processing/Wiring/Arduino goodies in a in an ARM dev board. The Maple has been EOL’d, and that means it’s time for a few new boards that build on what LeafLabs left behind.

This Hackaday Prize entry is for an almost-clone of the Leaflabs Maple Mini. It sports a …read more

Continue reading Hackaday Prize Entry: A Cheap STM32 Dev Board→

Hackaday Links: August 14, 2016

Posted on by

Hey London peeps! Hackaday and Tindie are doing a London meetup! It’s this Wednesday, the 17th.

What do you do if you need Gigabytes of storages in the 80s? You get tape drives. What do you do if you need Terabytes of storage in the year 2000? You get tape. The IBM Totalstorage 3584 is an automated tape storage unit made sometime around the year 2000. It held Terabytes of data, and [Stephen] picked up two of them from a local university. Here’s the teardown. Unfortunately, there’s no footage from a GoPro stuck inside the machine when it’s changing tapes, …read more

Continue reading Hackaday Links: August 14, 2016→

Hackaday Prize Entry: An Oven Of Raspberry Pis

Posted on by

When the Raspberry Pi was introduced, the world was given a very cheap, usable Linux computer. Cheap is good, and it enables one kind of project that was previously fairly expensive. This, of course, is cluster computing, and now we can imagine an Aronofsky-esque Beowulf cluster in our apartment.

This Hackaday Prize entry is for a 100-board cluster of Raspberry Pis running Hadoop. Has something like this been done before? Most certainly. The trick is getting it right, being able to physically scale the cluster, and putting the right software on it.

The Raspberry Pi doesn’t have connectors in all …read more

Continue reading Hackaday Prize Entry: An Oven Of Raspberry Pis→

Hackaday Prize Entry: A Good Electronics Learning Toolkit

Posted on by

The Maker movement is a wildly popular thing, even if we can’t define what it is. The push towards STEM education is absolutely, without a doubt, completely unlike a generation of brogrammers getting a CS degree because of the money. This means there’s a market for kits to get kids interested in electronics, and there are certainly a lot of options. Most of these ‘electronic learning platforms’ don’t actually look that good, and the pedagogical usefulness is very questionable. Evive is not one of these toolkits. It looks good, and might be actually useful.

The heart of the Evive is …read more

Continue reading Hackaday Prize Entry: A Good Electronics Learning Toolkit→

Hackaday Prize Entry: Autorouters Are For The Weak

Posted on by

[Yann]’s DYPLED entry into this year’s Hackaday Prize isn’t very useful to most people. It’s a tiny module that connects to a 16-bit parallel bus, and displays a hexadecimal number on a few LEDs. It’s useful if you’re diagnosing a problem on a computer from 1982, but just barely. The real wonder here is how [Yann] is doing this cheaply and easily using some weird techniques and strange parts.

The display for this tiny device is an array of 36 LEDs, arranged into a set of five seven-segment displays. Homebrew seven-segment displays are cool, but how is he driving it?  …read more

Continue reading Hackaday Prize Entry: Autorouters Are For The Weak→

Hackaday Prize Entry: An Open Source Retina Scanner

Posted on by

An ophthalmoscope is a device used to examine the back of the eye. This is useful for diagnosing everything from glaucoma, diabetic retinopathy, to detecting brain tumors. As you would expect from anything related to medicine, these devices cost a lot, making them inaccessible for most of the world’s population. This project for the Hackaday Prize is for an ophthalmoscope that can be built for under $400.

An ophthalmoscope is a relatively simple device, that really only requires a clinician to wear a head-mounted lamp and hold a condensing lens in front of the patient’s eye. Light is reflected off …read more

Continue reading Hackaday Prize Entry: An Open Source Retina Scanner→

Hackaday Prize Entry: Non-Computational Fluid Dynamics

Posted on by

Computational Fluid Dynamics, or CFD, and is applied to everything from aircraft design to how good of a wing a new skyscraper will be. Of course, the science of building airfoils is much older than CFD, leading to the question of how airfoil design was done before computers.

The answer, of course, is a wind tunnel. Walk around a few very good air museums, and you’ll find wind tunnels ranging from the long wooden boxes built by the Wright brothers to fantastic plywood contraptions that are exceptionally interesting to woodworkers.

[Joel] needed final project as an upcoming aeronautical engineer, but …read more

Continue reading Hackaday Prize Entry: Non-Computational Fluid Dynamics→