Author Archives: Brian Benchoff

Building Homebrew VTOL Rockets

Posted on by

No one can deny what SpaceX and Blue Origin are doing is a feat of technological wizardry. Building a rocket that takes off vertically, goes into space, and lands back on the pad is an astonishing technical achievement that is literally rocket science. However, both SpaceX and Blue Origin have a few things going for them. They have money, first of all. They’re building big rockets, so there’s a nice mass to thrust cube law efficiency bump. They’re using liquid fueled engines that can be throttled.

[Joe Barnard] isn’t working with the same constraints SpaceX and Blue Origin have. He’s …read more

Continue reading Building Homebrew VTOL Rockets→

SparkFun Gets Back To Their Roots With SparkX

Posted on by

Way back in the before years when there were still interesting concepts for reality TV, Nate Seidle blew up a power supply in his dorm room. Instead of finding replacement parts, Nate decided to start a company. For the last decade and a half, SparkFun has grown immensely, been an incredible resource for makers and engineers alike, and shipped out hundreds of thousands of their iconic red boxes.

Being the CEO of a company means you need to do CEO stuff, and a few summers ago Nate the CEO became Nate the Engineer once again. SparkFun is still doing great, …read more

Continue reading SparkFun Gets Back To Their Roots With SparkX→

Friday Hack Chat: Designing RF Products

Posted on by

This Friday, we’re talking RF. Join us for a discussion on designing RF products with Hackaday’s very own Jenny List. It’s all happening in the Hack Chat on hackaday.io.

When Jenny isn’t busy writing for Hackaday, she sits on the board of the Oxford Hackspace. She’s the brains behind Language Spy, and sells electronic kits that include receivers, filters, and RF breakout boards. She’s extremely active on hackaday.io, and has used a Pi Zero to transmit across the Atlantic.

As usual, we’re starting this Hack Chat at Noon, Pacific time on Friday (or Friday 20:00 GMT). Here’s a handy countdown  …read more

Continue reading Friday Hack Chat: Designing RF Products→

Hackaday Links: February 12, 2017

Posted on by

Taking small LCD screens, a tiny computer running Linux, and a 3D printed enclosure to build miniature versions of old computers is a thing now. Here’s [Cupcakus]’s tiny little Apple II, complete with Oregon Trail. This Apple II is running on a C.H.I.P., uses a 3s lithium battery from a drone, and works with a Bluetooth keyboard and joystick. Yes, the power button on the monitor works.

At Hackaday, we get a lot of emails from people asking the most important question ever: “how do you become a hardware hacker?” [Tex Projects] lays it all out on the line. All …read more

Continue reading Hackaday Links: February 12, 2017→

The Most Sensational Calipers On The Planet!

Posted on by

Everyone here probably has a pair of cheap Chinese calipers kicking around the workbench. This means everyone here also knows how quickly the batteries in these handy little tools die. [Thosnbn] also noticed this, but instead of simply complaining and wishing the problem would go away, he decided to do something about it. He built a battery pack for his calipers, giving this tool a two year battery life.

The idea for this build came after [thosnbn]  completely destroyed a pair of these cheap calipers. At the time, the fix was to tape a AA battery to the tool, and …read more

Continue reading The Most Sensational Calipers On The Planet!→

The Mother Of All Paper Cuts

Posted on by

A Dremel is a fantastically handy tool to have around the workbench, but there is one glaring and obvious downside: you will always run out of cut-off discs. if you’re trying to break into a fancy snap-fit enclosure that has been inexplicably glued together, you’ll invariably need to run down to the hardware store to shell out some cash for a tiny tube of cut-off disks.

[KB9RLW] has the answer to this problem. He’s cutting wood and plastic with paper discs spinning at 35,000 RPM.

The paper used for this application is just a piece of junk mail or heavy, …read more

Continue reading The Mother Of All Paper Cuts→

How To Fix Your Broken Onion Omega2

Posted on by

A decade ago, while RISC architecture was busy changing everything and people were wearing Utilikilts without beards, hackers were doing something amazing. They repurposed off-the-shelf routers and turned them into what we would now call the Internet of Things. Need to set up a PBX? A Linksys router will do it. Want to drive a remote control car over the Internet? It’s your old friend, WRT54G.

Now that the Internet of Things is a thing, a few companies have realized people will buy bare bones router chipsets. It’s like an Arduino, or something, and it connects to the Internet. We’ll …read more

Continue reading How To Fix Your Broken Onion Omega2→

A Guide For Building Rubber Dome Keyboards

Posted on by

Let’s talk about computer keyboards for a second. The worst keyboards in the world are the cheap ‘rubber dome’ keyboards shipped with every Dell, HP, and whatever OEM your company has a purchasing agreement with. These ‘rubber dome’ keyboards use a resistive touchpad to activate a circuit, and the springiness of the key comes from a flexible rubber membrane. Mechanical keyboards are far superior to these rubber dome switches, using real leaf springs and bits of metal for the click clack happiness that is the sole respite of a soul-crushing existence. MX blues get bonus points for annoying your coworkers. …read more

Continue reading A Guide For Building Rubber Dome Keyboards→

A Blissful Microwave

Posted on by

[Tim] had a problem with his microwave. The buzzer was exceptionally annoying, and once his hot pockets or pizza rolls were done, the buzzer wouldn’t shut off. A two-kilohertz tone infected his soul. It was the only sound echoing in a Boschian nightmare of reheated frozen food.

Unlike an existential ennui, an annoying buzzer in a microwave is something anyone can fix. [Tim] just took a pair of pliers to the buzzer and ripped it off the PCB. This left him with another problem — how to tell when his food was done. This was solved by putting the Windows …read more

Continue reading A Blissful Microwave→

Correct Horse Battery Staple: The Book

Posted on by

XKCD 936, the comic that introduced the phrase, ‘correct horse battery staple’ into both the lexicon and password dictionaries, is the best way to generate a password. Your passwords should be random phrases of random words, hopefully with a few random numbers or symbols sprinkled about. It’s the most entropy you can get that’s also easy to remember.

However, generating your own ‘correct horse’ password is generally a bad idea. Humans are terrible at coming up with random bits of information. Thankfully, the EFF has come up with a wordlist containing 7,776 random words (65, or five rolls …read more

Continue reading Correct Horse Battery Staple: The Book→