Author Archives: Adam Fabio

Monotron Gets All the Mods

Posted on by

[Harry Axten] turned the diminutive Korn Monotron into a playable analog synthesizer, complete with a full-sized keyboard spanning two octaves and a MIDI interface.

Korg Introduced the Monotron analog mini-synthesizer back in 2010. They also dropped the schematics for the synth. Hackers wasted no time modifying and improving the Monotron. [Harry] incorporated several of these changes into his build. The Low-Frequency Oscillator (LFO) has been changed over to an envelope generator. The ribbon controller is gone, replaced with a CV/gate interface to sound notes.

The CV/gate interface, in turn, is connected to an ATMega328P which converts it to MIDI. MIDI …read more

Continue reading Monotron Gets All the Mods→

Flite Test Puts a Chair in the Air

Posted on by

The Flite Test crew is well known for putting some crazy flying contraptions together. They’ve outdone themselves this time with a flying IKEA chair. This build began with [Josh] issuing a challenge to [Stefan]. Take a standard IKEA ladderback chair and make it fly– in less than six hours. With such a tight schedule, measuring twice and cutting once was right out the window. This was a hackathon-style “throw it together and hope it works” build.

The chair was plenty sturdy, so it became the core of the fuselage. [Stefan] grabbed the wing from a previous plane and placed it …read more

Continue reading Flite Test Puts a Chair in the Air→

Save the Tally Ho: Rebuilding a Historic Yacht

Posted on by

[Leo Sampson Goolden] is a boatbuilder and Sailor. He’s a prime example of a dwindling group of shipwrights who build sailing vessels the traditional way. In 2017, he was given the opportunity to buy Tally Ho, a Yacht built back in 1910. Once a proud ship, Tally Ho now sat as a shell under a shrink-wrap tarp. Her deck was rotted, her keel cracked. Any sane person would have moved on. Thankfully [Leo] is not quite sane, and began a quest to bring this history ship back to its former glory.

Tally Ho isn’t just an old boat. She is …read more

Continue reading Save the Tally Ho: Rebuilding a Historic Yacht→

Zippo Keeps Your Bits Safe

Posted on by

[Laura Kampf] found a new use for an old Zippo lighter by turning it into a carrier for her screwdriver bits. There are several multitools out there which can accept standard screwdriver bits. The problem is carrying those bits around. Leaving a few bits in your pocket is a recipe for pocket holes and missing bits.

[Laura’s] solution uses her old Zippo lighter. All she needs is the case, the lighter element itself can be saved for another project. A block of aluminum is cut and sanded down to a friction fit. Laura uses a band saw and bench sander …read more

Continue reading Zippo Keeps Your Bits Safe→

Margaret Hamilton Takes Software Engineering To the Moon and Beyond

Posted on by

If you were to create a short list of women who influenced software engineering, one of the first picks would be Margaret Hamilton.
The Apollo 11 source code lists her title as “PROGRAMMING LEADER”. Today that title would probably be something along the line of “Lead software engineer”

Margaret Hamilton was born in rural Indiana in 1931. Her father was a philosopher and poet, who, along with grandfather, encouraged her love of math and sciences. She studied mathematics with a minor in philosophy, earning her BA from Earlham College in 1956. While at Earlham, her plan to continue on to …read more

Continue reading Margaret Hamilton Takes Software Engineering To the Moon and Beyond→

Leap Motion Announces Open Source Augmented Reality Headset

Posted on by

Leap Motion just dropped what may be the biggest tease in Augmented and Virtual Reality since Google Cardboard. The North Star is an augmented reality head-mounted display that boasts some impressive specs:

  • Dual 1600×1440 LCDs
  • 120Hz refresh rate
  • 100 degree FOV
  • Cost under $100 (in volume)
  • Open Source Hardware
  • Built-in Leap Motion camera for precise hand tracking

Yes, you read that last line correctly. The North Star will be open source hardware. Leap Motion is planning to drop all the hardware information next week.

Now that we’ve got you excited, let’s mention what the North Star is not — it’s …read more

Continue reading Leap Motion Announces Open Source Augmented Reality Headset→

Bring Deep Learning Algorithms To Your Security Cameras

Posted on by

AI is quickly revolutionizing the security camera industry. Several manufacturers sell cameras which use deep learning to detect cars, people, and other events. These smart cameras are generally expensive though, compared to their “dumb” counterparts. [Martin] was able to bring these detection features to a standard camera with a Raspberry Pi, and a bit of ingenuity.

[Martin’s] goal was to capture events of interest, such as a person on screen, or a car in the driveway. The data for the events would then be published to an MQTT topic, along with some metadata such as confidence level. OpenCV is generally …read more

Continue reading Bring Deep Learning Algorithms To Your Security Cameras→

3D Printed Skateboard Mount for Bikes

Posted on by

[Matt Obal] had a problem. The local skatepark was too far to skateboard, but close enough to bike. Carrying a skateboard on a bicycle is a rather awkward (and unsafe) maneuver. [Matt’s] answer to the problem is Truck Stop, a bicycle mounted skateboard carrier he developed and is manufacturing himself.

[Matt’s] work on Truck Stop began about a year ago, with his purchase of a 3D printer. He designed a seat back mounted device that secures the skateboard by wedging between the truck and the board itself. The design is printed in PLA and is hollow. Truck Stop’s strength comes …read more

Continue reading 3D Printed Skateboard Mount for Bikes→

Turn Your Lathe into a Shaper

Posted on by

Ingenuity is the name of the game with manual machine tools. You often have to get creative to use the tools you have to create the part you want. That’s exactly what happened when [John] needed to cut internal splines and keyways using his lathe.

Lathes are usually used to turn metal, but internal keyways and splines are operations often performed with a broach. An older tool called a shaper would be perfect here, but shapers are relatively rare these days — or are they? There are many examples of shaper attachments for lathes. These are human-powered devices that scrape …read more

Continue reading Turn Your Lathe into a Shaper→

The Strange Physics of Curling

Posted on by

It turns out that curling involves some complex physics. [Destin] of Smarter Every Day has jumped in to find out why scientists on opposite sides of the Atlantic disagree about why curling stones curl.

If you’ve been watching the Olympics, you’ve probably seen some curling, the Scottish sport of competitively pushing stones on ice. As the name implies, curling stones don’t go straight. The thrower pushes them with a bit of rotation, and the stones curve in the direction they are rotating. This is exactly the opposite of what one would expect — try it yourself with an inverted drinking …read more

Continue reading The Strange Physics of Curling→