Category Archives: Pi

PiSound, The Audio Card For The Raspberry Pi

Posted on by

Kids today are being loud with their ‘drum machines’ and ‘EDM’. Throw some Raspberry Pis at them, and there’s a need for a low-latency sound card with MIDI and all the other accouterments of the modern, Skrillex-haired rocker. That’s where PiSound comes in.

Of course, the Pi already comes with audio out, but that’s not enough if you want to do some real audio processing. You need audio in as well, and while you’re messing around with that, adding some high-quality opamps, ADCs, DACs, and some MIDI would be a good idea. This is what the PiSound is all about. …read more

Continue reading PiSound, The Audio Card For The Raspberry Pi→

Raspberry Pi-Based Game Boy Emulator

Posted on by

The most popular use for a Raspberry Pi, by far, is video game emulation. We see this in many, many forms from 3D printed Raspberry Pi cases resembling the original Nintendo Entertainment System to 3D printed Raspberry Pi cases resembling Super Nintendos. There’s a lot of variety out there for Raspberry Pi emulation, but [moosepr] is taking it to the next level. He’s building the smallest Pi emulation build we’ve ever seen.

This build is based on the Pi Zero and a 2.2″ (0.56 dm) ili9341 TFT display. This display has a resolution of 240×320 pixels, which is close enough …read more

Continue reading Raspberry Pi-Based Game Boy Emulator→

Hackaday Links: January 29, 2017

Posted on by

A 3D printer and laser cutter were cited as cause in two deaths. A couple (and two cats) were found dead in their apartment this week. The cause of death was carbon monoxide poisoning. Police and the gas company investigated the residence and found no other source of carbon monoxide besides a 3D printer and a laser cutter. Be sure to check out the people who know more about these deaths than the people who actually investigated these deaths in the comments below. In the mean time, get a CO detector. It’s nasty stuff.

At CES last this month, Lulzbot …read more

Continue reading Hackaday Links: January 29, 2017→

Hackaday Links: January 22, 2017

Posted on by

What is a 1971 Ford Torino worth? It depends, but even a 2-door in terrible condition should fetch about $7 or $8k. What is a 1971 Ford Torino covered in 3D printed crap worth? $5500. This is the first ‘3D printed car’ on an auction block. It looks terrible and saying ‘Klaatu Varada Nikto’ unlocks the doors.

Old Apple IIs had a DB19 connector for external floppy drives. Some old macs, pre-PowerPC at least, also had a DB19 connector for external floppy drives. These drives are incompatible with each other for reasons. [Dandu] has a few old macs and …read more

Continue reading Hackaday Links: January 22, 2017→

Improving Raspberry Pi Disk Performance

Posted on by

Usually, you think of solid state storage as faster than a rotating hard drive. However, in the case of the Raspberry Pi, the solid state “disk drive” is a memory card that uses a serial interface. So while a 7200 RPM SATA drive might get speeds in excess of 100MB/s, the Pi’s performance is significantly less.

[Rusher] uses the Gluster distributed file system and Docker on his Raspberry Pi. He measured write performance to be a sluggish 1MB/s (and the root file system was clocking in at just over 40MB/s).

There are an endless number of settings you could tweak, …read more

Continue reading Improving Raspberry Pi Disk Performance→

Orange Pi Releases Two Boards

Posted on by

A few years ago, someone figured out small, cheap ARM Linux boards are really, really useful, extremely popular, sell very well, blink LEDs, and are able to open the doors of engineering and computer science to everyone. There is one giant manufacturer of these cheap ARM Linux boards whose mere mention guarantees us a few thousand extra clicks on this article. There are other manufacturers of these boards, though, and there is no benevolent monopoly; the smaller manufacturers of these boards should bring new features and better specs to the ARM Linux board ecosystem. A drop of water in …read more

Continue reading Orange Pi Releases Two Boards→

Impressive Pi System Controls Large Office

Posted on by

A pile of Raspberry Pis isn’t what would spring to mind for most people when building a system to control a large office, but most people aren’t [Kamil Górski]. He decided to use Pis to run the office of his company Monterail when they moved to a larger space. The system they built is one of the largest Pi installations we have seen, controlling the lights, TVs, speakers and door access. It can all be controlled through a web interface, so anyone on the network can turn the lights on or off, check if a room is occupied or send …read more

Continue reading Impressive Pi System Controls Large Office→

Counting Eggs With A Webcam

Posted on by

You’ll have to dig out your French dictionary (or Google translate) for this one, but it is worth it. [Nicolas Giraud] has been experimenting with ways to use a webcam to detect the number of eggs chickens have laid in a chicken coop. This page documents these experiments using a number of different algorithms to automatically detect the number of eggs and notify the owner. The system is simple, built around a Pi running Debian Jesse Lite and a cheap USB webcam. An LED running off one of the GPIO pins illuminates the eggs, and the camera then captures the …read more

Continue reading Counting Eggs With A Webcam→

Rainy Day Fun by Calculating Pi

Posted on by

If you need a truly random event generator, just wait till your next rainstorm. Whether any given spot on the ground is hit by a drop at a particular time is anyone’s guess, and such randomness is key to this simple rig that estimates the value of pi using raindrop sensors.

You may recall [AlphaPhoenix]’s recent electroshock Settlers of Catan expeditor. The idea with this less shocking build is to estimate the value of pi using the ratio of the area of a square sensor to a circular one. Simple piezo transducers serve as impact sensors that feed an Arduino …read more

Continue reading Rainy Day Fun by Calculating Pi→

Another Small Linux Computer With Pi In Its Name

Posted on by

Since the introduction of the Raspberry Pi, the embedded Linux scene has been rocked by well supported hardware that is produced in quantity, a company that won’t go out of business in six months, and a huge user base. Yes, there are a few small problems with the Raspberry Pi and its foundation – some stuff is still closed source, the Foundation itself plays things close to their chests, and there are some weird binary blobs somebody will eventually reverse engineer. Viewed against the competition, though, nothing else compares.

Here’s the NanoPi Neo, the latest quad-core Allwinner board from a …read more

Continue reading Another Small Linux Computer With Pi In Its Name→